1084 lines
48 KiB
C
1084 lines
48 KiB
C
|
/**************************************************************************//**
|
||
|
|
* @file core_cm0plus.h
|
||
|
|
* @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
|
||
|
|
* @version V5.0.6
|
||
|
|
* @date 28. May 2018
|
||
|
|
******************************************************************************/
|
||
|
|
/*
|
||
|
|
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
|
||
|
|
*
|
||
|
|
* SPDX-License-Identifier: Apache-2.0
|
||
|
|
*
|
||
|
|
* Licensed under the Apache License, Version 2.0 (the License); you may
|
||
|
|
* not use this file except in compliance with the License.
|
||
|
|
* You may obtain a copy of the License at
|
||
|
|
*
|
||
|
|
* www.apache.org/licenses/LICENSE-2.0
|
||
|
|
*
|
||
|
|
* Unless required by applicable law or agreed to in writing, software
|
||
|
|
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
|
||
|
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||
|
|
* See the License for the specific language governing permissions and
|
||
|
|
* limitations under the License.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#if defined ( __ICCARM__ )
|
||
|
|
#pragma system_include /* treat file as system include file for MISRA check */
|
||
|
|
#elif defined (__clang__)
|
||
|
|
#pragma clang system_header /* treat file as system include file */
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifndef __CORE_CM0PLUS_H_GENERIC
|
||
|
|
#define __CORE_CM0PLUS_H_GENERIC
|
||
|
|
|
||
|
|
#include <stdint.h>
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
extern "C" {
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/**
|
||
|
|
\page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
|
||
|
|
CMSIS violates the following MISRA-C:2004 rules:
|
||
|
|
|
||
|
|
\li Required Rule 8.5, object/function definition in header file.<br>
|
||
|
|
Function definitions in header files are used to allow 'inlining'.
|
||
|
|
|
||
|
|
\li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
|
||
|
|
Unions are used for effective representation of core registers.
|
||
|
|
|
||
|
|
\li Advisory Rule 19.7, Function-like macro defined.<br>
|
||
|
|
Function-like macros are used to allow more efficient code.
|
||
|
|
*/
|
||
|
|
|
||
|
|
|
||
|
|
/*******************************************************************************
|
||
|
|
* CMSIS definitions
|
||
|
|
******************************************************************************/
|
||
|
|
/**
|
||
|
|
\ingroup Cortex-M0+
|
||
|
|
@{
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include "cmsis_version.h"
|
||
|
|
|
||
|
|
/* CMSIS CM0+ definitions */
|
||
|
|
#define __CM0PLUS_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */
|
||
|
|
#define __CM0PLUS_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */
|
||
|
|
#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16U) | \
|
||
|
|
__CM0PLUS_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */
|
||
|
|
|
||
|
|
#define __CORTEX_M (0U) /*!< Cortex-M Core */
|
||
|
|
|
||
|
|
/** __FPU_USED indicates whether an FPU is used or not.
|
||
|
|
This core does not support an FPU at all
|
||
|
|
*/
|
||
|
|
#define __FPU_USED 0U
|
||
|
|
|
||
|
|
#if defined ( __CC_ARM )
|
||
|
|
#if defined __TARGET_FPU_VFP
|
||
|
|
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
|
||
|
|
#if defined __ARM_PCS_VFP
|
||
|
|
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#elif defined ( __GNUC__ )
|
||
|
|
#if defined (__VFP_FP__) && !defined(__SOFTFP__)
|
||
|
|
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#elif defined ( __ICCARM__ )
|
||
|
|
#if defined __ARMVFP__
|
||
|
|
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#elif defined ( __TI_ARM__ )
|
||
|
|
#if defined __TI_VFP_SUPPORT__
|
||
|
|
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#elif defined ( __TASKING__ )
|
||
|
|
#if defined __FPU_VFP__
|
||
|
|
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#elif defined ( __CSMC__ )
|
||
|
|
#if ( __CSMC__ & 0x400U)
|
||
|
|
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#include "cmsis_compiler.h" /* CMSIS compiler specific defines */
|
||
|
|
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#endif /* __CORE_CM0PLUS_H_GENERIC */
|
||
|
|
|
||
|
|
#ifndef __CMSIS_GENERIC
|
||
|
|
|
||
|
|
#ifndef __CORE_CM0PLUS_H_DEPENDANT
|
||
|
|
#define __CORE_CM0PLUS_H_DEPENDANT
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
extern "C" {
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/* check device defines and use defaults */
|
||
|
|
#if defined __CHECK_DEVICE_DEFINES
|
||
|
|
#ifndef __CM0PLUS_REV
|
||
|
|
#define __CM0PLUS_REV 0x0000U
|
||
|
|
#warning "__CM0PLUS_REV not defined in device header file; using default!"
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifndef __MPU_PRESENT
|
||
|
|
#define __MPU_PRESENT 0U
|
||
|
|
#warning "__MPU_PRESENT not defined in device header file; using default!"
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifndef __VTOR_PRESENT
|
||
|
|
#define __VTOR_PRESENT 0U
|
||
|
|
#warning "__VTOR_PRESENT not defined in device header file; using default!"
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifndef __NVIC_PRIO_BITS
|
||
|
|
#define __NVIC_PRIO_BITS 2U
|
||
|
|
#warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifndef __Vendor_SysTickConfig
|
||
|
|
#define __Vendor_SysTickConfig 0U
|
||
|
|
#warning "__Vendor_SysTickConfig not defined in device header file; using default!"
|
||
|
|
#endif
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/* IO definitions (access restrictions to peripheral registers) */
|
||
|
|
/**
|
||
|
|
\defgroup CMSIS_glob_defs CMSIS Global Defines
|
||
|
|
|
||
|
|
<strong>IO Type Qualifiers</strong> are used
|
||
|
|
\li to specify the access to peripheral variables.
|
||
|
|
\li for automatic generation of peripheral register debug information.
|
||
|
|
*/
|
||
|
|
#ifdef __cplusplus
|
||
|
|
#define __I volatile /*!< Defines 'read only' permissions */
|
||
|
|
#else
|
||
|
|
#define __I volatile const /*!< Defines 'read only' permissions */
|
||
|
|
#endif
|
||
|
|
#define __O volatile /*!< Defines 'write only' permissions */
|
||
|
|
#define __IO volatile /*!< Defines 'read / write' permissions */
|
||
|
|
|
||
|
|
/* following defines should be used for structure members */
|
||
|
|
#define __IM volatile const /*! Defines 'read only' structure member permissions */
|
||
|
|
#define __OM volatile /*! Defines 'write only' structure member permissions */
|
||
|
|
#define __IOM volatile /*! Defines 'read / write' structure member permissions */
|
||
|
|
|
||
|
|
/*@} end of group Cortex-M0+ */
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
/*******************************************************************************
|
||
|
|
* Register Abstraction
|
||
|
|
Core Register contain:
|
||
|
|
- Core Register
|
||
|
|
- Core NVIC Register
|
||
|
|
- Core SCB Register
|
||
|
|
- Core SysTick Register
|
||
|
|
- Core MPU Register
|
||
|
|
******************************************************************************/
|
||
|
|
/**
|
||
|
|
\defgroup CMSIS_core_register Defines and Type Definitions
|
||
|
|
\brief Type definitions and defines for Cortex-M processor based devices.
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
\ingroup CMSIS_core_register
|
||
|
|
\defgroup CMSIS_CORE Status and Control Registers
|
||
|
|
\brief Core Register type definitions.
|
||
|
|
@{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
\brief Union type to access the Application Program Status Register (APSR).
|
||
|
|
*/
|
||
|
|
typedef union
|
||
|
|
{
|
||
|
|
struct
|
||
|
|
{
|
||
|
|
uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
|
||
|
|
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
|
||
|
|
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
|
||
|
|
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
|
||
|
|
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
|
||
|
|
} b; /*!< Structure used for bit access */
|
||
|
|
uint32_t w; /*!< Type used for word access */
|
||
|
|
} APSR_Type;
|
||
|
|
|
||
|
|
/* APSR Register Definitions */
|
||
|
|
#define APSR_N_Pos 31U /*!< APSR: N Position */
|
||
|
|
#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
|
||
|
|
|
||
|
|
#define APSR_Z_Pos 30U /*!< APSR: Z Position */
|
||
|
|
#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
|
||
|
|
|
||
|
|
#define APSR_C_Pos 29U /*!< APSR: C Position */
|
||
|
|
#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
|
||
|
|
|
||
|
|
#define APSR_V_Pos 28U /*!< APSR: V Position */
|
||
|
|
#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
\brief Union type to access the Interrupt Program Status Register (IPSR).
|
||
|
|
*/
|
||
|
|
typedef union
|
||
|
|
{
|
||
|
|
struct
|
||
|
|
{
|
||
|
|
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
|
||
|
|
uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
|
||
|
|
} b; /*!< Structure used for bit access */
|
||
|
|
uint32_t w; /*!< Type used for word access */
|
||
|
|
} IPSR_Type;
|
||
|
|
|
||
|
|
/* IPSR Register Definitions */
|
||
|
|
#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
|
||
|
|
#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
\brief Union type to access the Special-Purpose Program Status Registers (xPSR).
|
||
|
|
*/
|
||
|
|
typedef union
|
||
|
|
{
|
||
|
|
struct
|
||
|
|
{
|
||
|
|
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
|
||
|
|
uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
|
||
|
|
uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
|
||
|
|
uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
|
||
|
|
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
|
||
|
|
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
|
||
|
|
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
|
||
|
|
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
|
||
|
|
} b; /*!< Structure used for bit access */
|
||
|
|
uint32_t w; /*!< Type used for word access */
|
||
|
|
} xPSR_Type;
|
||
|
|
|
||
|
|
/* xPSR Register Definitions */
|
||
|
|
#define xPSR_N_Pos 31U /*!< xPSR: N Position */
|
||
|
|
#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
|
||
|
|
|
||
|
|
#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
|
||
|
|
#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
|
||
|
|
|
||
|
|
#define xPSR_C_Pos 29U /*!< xPSR: C Position */
|
||
|
|
#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
|
||
|
|
|
||
|
|
#define xPSR_V_Pos 28U /*!< xPSR: V Position */
|
||
|
|
#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
|
||
|
|
|
||
|
|
#define xPSR_T_Pos 24U /*!< xPSR: T Position */
|
||
|
|
#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
|
||
|
|
|
||
|
|
#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
|
||
|
|
#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
\brief Union type to access the Control Registers (CONTROL).
|
||
|
|
*/
|
||
|
|
typedef union
|
||
|
|
{
|
||
|
|
struct
|
||
|
|
{
|
||
|
|
uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
|
||
|
|
uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
|
||
|
|
uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
|
||
|
|
} b; /*!< Structure used for bit access */
|
||
|
|
uint32_t w; /*!< Type used for word access */
|
||
|
|
} CONTROL_Type;
|
||
|
|
|
||
|
|
/* CONTROL Register Definitions */
|
||
|
|
#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
|
||
|
|
#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
|
||
|
|
|
||
|
|
#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
|
||
|
|
#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
|
||
|
|
|
||
|
|
/*@} end of group CMSIS_CORE */
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
\ingroup CMSIS_core_register
|
||
|
|
\defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
|
||
|
|
\brief Type definitions for the NVIC Registers
|
||
|
|
@{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
\brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
|
||
|
|
*/
|
||
|
|
typedef struct
|
||
|
|
{
|
||
|
|
__IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
|
||
|
|
uint32_t RESERVED0[31U];
|
||
|
|
__IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
|
||
|
|
uint32_t RSERVED1[31U];
|
||
|
|
__IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
|
||
|
|
uint32_t RESERVED2[31U];
|
||
|
|
__IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
|
||
|
|
uint32_t RESERVED3[31U];
|
||
|
|
uint32_t RESERVED4[64U];
|
||
|
|
__IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
|
||
|
|
} NVIC_Type;
|
||
|
|
|
||
|
|
/*@} end of group CMSIS_NVIC */
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
\ingroup CMSIS_core_register
|
||
|
|
\defgroup CMSIS_SCB System Control Block (SCB)
|
||
|
|
\brief Type definitions for the System Control Block Registers
|
||
|
|
@{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
\brief Structure type to access the System Control Block (SCB).
|
||
|
|
*/
|
||
|
|
typedef struct
|
||
|
|
{
|
||
|
|
__IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
|
||
|
|
__IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
|
||
|
|
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
|
||
|
|
__IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
|
||
|
|
#else
|
||
|
|
uint32_t RESERVED0;
|
||
|
|
#endif
|
||
|
|
__IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
|
||
|
|
__IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
|
||
|
|
__IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
|
||
|
|
uint32_t RESERVED1;
|
||
|
|
__IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
|
||
|
|
__IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
|
||
|
|
} SCB_Type;
|
||
|
|
|
||
|
|
/* SCB CPUID Register Definitions */
|
||
|
|
#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
|
||
|
|
#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
|
||
|
|
|
||
|
|
#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
|
||
|
|
#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
|
||
|
|
|
||
|
|
#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
|
||
|
|
#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
|
||
|
|
|
||
|
|
#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
|
||
|
|
#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
|
||
|
|
|
||
|
|
#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
|
||
|
|
#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
|
||
|
|
|
||
|
|
/* SCB Interrupt Control State Register Definitions */
|
||
|
|
#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
|
||
|
|
#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
|
||
|
|
|
||
|
|
#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
|
||
|
|
#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
|
||
|
|
|
||
|
|
#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
|
||
|
|
#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
|
||
|
|
|
||
|
|
#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
|
||
|
|
#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
|
||
|
|
|
||
|
|
#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
|
||
|
|
#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
|
||
|
|
|
||
|
|
#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
|
||
|
|
#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
|
||
|
|
|
||
|
|
#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
|
||
|
|
#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
|
||
|
|
|
||
|
|
#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
|
||
|
|
#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
|
||
|
|
|
||
|
|
#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
|
||
|
|
#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
|
||
|
|
|
||
|
|
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
|
||
|
|
/* SCB Interrupt Control State Register Definitions */
|
||
|
|
#define SCB_VTOR_TBLOFF_Pos 8U /*!< SCB VTOR: TBLOFF Position */
|
||
|
|
#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/* SCB Application Interrupt and Reset Control Register Definitions */
|
||
|
|
#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
|
||
|
|
#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
|
||
|
|
|
||
|
|
#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
|
||
|
|
#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
|
||
|
|
|
||
|
|
#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
|
||
|
|
#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
|
||
|
|
|
||
|
|
#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
|
||
|
|
#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
|
||
|
|
|
||
|
|
#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
|
||
|
|
#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
|
||
|
|
|
||
|
|
/* SCB System Control Register Definitions */
|
||
|
|
#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
|
||
|
|
#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
|
||
|
|
|
||
|
|
#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
|
||
|
|
#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
|
||
|
|
|
||
|
|
#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
|
||
|
|
#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
|
||
|
|
|
||
|
|
/* SCB Configuration Control Register Definitions */
|
||
|
|
#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
|
||
|
|
#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
|
||
|
|
|
||
|
|
#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
|
||
|
|
#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
|
||
|
|
|
||
|
|
/* SCB System Handler Control and State Register Definitions */
|
||
|
|
#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
|
||
|
|
#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
|
||
|
|
|
||
|
|
/*@} end of group CMSIS_SCB */
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
\ingroup CMSIS_core_register
|
||
|
|
\defgroup CMSIS_SysTick System Tick Timer (SysTick)
|
||
|
|
\brief Type definitions for the System Timer Registers.
|
||
|
|
@{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
\brief Structure type to access the System Timer (SysTick).
|
||
|
|
*/
|
||
|
|
typedef struct
|
||
|
|
{
|
||
|
|
__IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
|
||
|
|
__IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
|
||
|
|
__IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
|
||
|
|
__IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
|
||
|
|
} SysTick_Type;
|
||
|
|
|
||
|
|
/* SysTick Control / Status Register Definitions */
|
||
|
|
#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
|
||
|
|
#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
|
||
|
|
|
||
|
|
#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
|
||
|
|
#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
|
||
|
|
|
||
|
|
#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
|
||
|
|
#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
|
||
|
|
|
||
|
|
#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
|
||
|
|
#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
|
||
|
|
|
||
|
|
/* SysTick Reload Register Definitions */
|
||
|
|
#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
|
||
|
|
#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
|
||
|
|
|
||
|
|
/* SysTick Current Register Definitions */
|
||
|
|
#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
|
||
|
|
#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
|
||
|
|
|
||
|
|
/* SysTick Calibration Register Definitions */
|
||
|
|
#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
|
||
|
|
#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
|
||
|
|
|
||
|
|
#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
|
||
|
|
#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
|
||
|
|
|
||
|
|
#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
|
||
|
|
#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
|
||
|
|
|
||
|
|
/*@} end of group CMSIS_SysTick */
|
||
|
|
|
||
|
|
#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
|
||
|
|
/**
|
||
|
|
\ingroup CMSIS_core_register
|
||
|
|
\defgroup CMSIS_MPU Memory Protection Unit (MPU)
|
||
|
|
\brief Type definitions for the Memory Protection Unit (MPU)
|
||
|
|
@{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
\brief Structure type to access the Memory Protection Unit (MPU).
|
||
|
|
*/
|
||
|
|
typedef struct
|
||
|
|
{
|
||
|
|
__IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
|
||
|
|
__IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
|
||
|
|
__IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
|
||
|
|
__IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
|
||
|
|
__IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
|
||
|
|
} MPU_Type;
|
||
|
|
|
||
|
|
#define MPU_TYPE_RALIASES 1U
|
||
|
|
|
||
|
|
/* MPU Type Register Definitions */
|
||
|
|
#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
|
||
|
|
#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
|
||
|
|
|
||
|
|
#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
|
||
|
|
#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
|
||
|
|
|
||
|
|
#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
|
||
|
|
#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
|
||
|
|
|
||
|
|
/* MPU Control Register Definitions */
|
||
|
|
#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
|
||
|
|
#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
|
||
|
|
|
||
|
|
#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
|
||
|
|
#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
|
||
|
|
|
||
|
|
#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
|
||
|
|
#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
|
||
|
|
|
||
|
|
/* MPU Region Number Register Definitions */
|
||
|
|
#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
|
||
|
|
#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
|
||
|
|
|
||
|
|
/* MPU Region Base Address Register Definitions */
|
||
|
|
#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */
|
||
|
|
#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
|
||
|
|
|
||
|
|
#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
|
||
|
|
#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
|
||
|
|
|
||
|
|
#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
|
||
|
|
#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
|
||
|
|
|
||
|
|
/* MPU Region Attribute and Size Register Definitions */
|
||
|
|
#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
|
||
|
|
#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
|
||
|
|
|
||
|
|
#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
|
||
|
|
#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
|
||
|
|
|
||
|
|
#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
|
||
|
|
#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
|
||
|
|
|
||
|
|
#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
|
||
|
|
#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
|
||
|
|
|
||
|
|
#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
|
||
|
|
#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
|
||
|
|
|
||
|
|
#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
|
||
|
|
#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
|
||
|
|
|
||
|
|
#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
|
||
|
|
#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
|
||
|
|
|
||
|
|
#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
|
||
|
|
#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
|
||
|
|
|
||
|
|
#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
|
||
|
|
#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
|
||
|
|
|
||
|
|
#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
|
||
|
|
#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
|
||
|
|
|
||
|
|
/*@} end of group CMSIS_MPU */
|
||
|
|
#endif
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
\ingroup CMSIS_core_register
|
||
|
|
\defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
|
||
|
|
\brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
|
||
|
|
Therefore they are not covered by the Cortex-M0+ header file.
|
||
|
|
@{
|
||
|
|
*/
|
||
|
|
/*@} end of group CMSIS_CoreDebug */
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
\ingroup CMSIS_core_register
|
||
|
|
\defgroup CMSIS_core_bitfield Core register bit field macros
|
||
|
|
\brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
|
||
|
|
@{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
\brief Mask and shift a bit field value for use in a register bit range.
|
||
|
|
\param[in] field Name of the register bit field.
|
||
|
|
\param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type.
|
||
|
|
\return Masked and shifted value.
|
||
|
|
*/
|
||
|
|
#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
|
||
|
|
|
||
|
|
/**
|
||
|
|
\brief Mask and shift a register value to extract a bit filed value.
|
||
|
|
\param[in] field Name of the register bit field.
|
||
|
|
\param[in] value Value of register. This parameter is interpreted as an uint32_t type.
|
||
|
|
\return Masked and shifted bit field value.
|
||
|
|
*/
|
||
|
|
#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
|
||
|
|
|
||
|
|
/*@} end of group CMSIS_core_bitfield */
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
\ingroup CMSIS_core_register
|
||
|
|
\defgroup CMSIS_core_base Core Definitions
|
||
|
|
\brief Definitions for base addresses, unions, and structures.
|
||
|
|
@{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Memory mapping of Core Hardware */
|
||
|
|
#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
|
||
|
|
#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
|
||
|
|
#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
|
||
|
|
#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
|
||
|
|
|
||
|
|
#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
|
||
|
|
#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
|
||
|
|
#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
|
||
|
|
|
||
|
|
#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
|
||
|
|
#define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
|
||
|
|
#define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/*@} */
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
/*******************************************************************************
|
||
|
|
* Hardware Abstraction Layer
|
||
|
|
Core Function Interface contains:
|
||
|
|
- Core NVIC Functions
|
||
|
|
- Core SysTick Functions
|
||
|
|
- Core Register Access Functions
|
||
|
|
******************************************************************************/
|
||
|
|
/**
|
||
|
|
\defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
|
||
|
|
*/
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
/* ########################## NVIC functions #################################### */
|
||
|
|
/**
|
||
|
|
\ingroup CMSIS_Core_FunctionInterface
|
||
|
|
\defgroup CMSIS_Core_NVICFunctions NVIC Functions
|
||
|
|
\brief Functions that manage interrupts and exceptions via the NVIC.
|
||
|
|
@{
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifdef CMSIS_NVIC_VIRTUAL
|
||
|
|
#ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
|
||
|
|
#define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
|
||
|
|
#endif
|
||
|
|
#include CMSIS_NVIC_VIRTUAL_HEADER_FILE
|
||
|
|
#else
|
||
|
|
#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping
|
||
|
|
#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping
|
||
|
|
#define NVIC_EnableIRQ __NVIC_EnableIRQ
|
||
|
|
#define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ
|
||
|
|
#define NVIC_DisableIRQ __NVIC_DisableIRQ
|
||
|
|
#define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ
|
||
|
|
#define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ
|
||
|
|
#define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ
|
||
|
|
/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0+ */
|
||
|
|
#define NVIC_SetPriority __NVIC_SetPriority
|
||
|
|
#define NVIC_GetPriority __NVIC_GetPriority
|
||
|
|
#define NVIC_SystemReset __NVIC_SystemReset
|
||
|
|
#endif /* CMSIS_NVIC_VIRTUAL */
|
||
|
|
|
||
|
|
#ifdef CMSIS_VECTAB_VIRTUAL
|
||
|
|
#ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
|
||
|
|
#define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
|
||
|
|
#endif
|
||
|
|
#include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
|
||
|
|
#else
|
||
|
|
#define NVIC_SetVector __NVIC_SetVector
|
||
|
|
#define NVIC_GetVector __NVIC_GetVector
|
||
|
|
#endif /* (CMSIS_VECTAB_VIRTUAL) */
|
||
|
|
|
||
|
|
#define NVIC_USER_IRQ_OFFSET 16
|
||
|
|
|
||
|
|
|
||
|
|
/* The following EXC_RETURN values are saved the LR on exception entry */
|
||
|
|
#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */
|
||
|
|
#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */
|
||
|
|
#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */
|
||
|
|
|
||
|
|
|
||
|
|
/* Interrupt Priorities are WORD accessible only under Armv6-M */
|
||
|
|
/* The following MACROS handle generation of the register offset and byte masks */
|
||
|
|
#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
|
||
|
|
#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
|
||
|
|
#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
|
||
|
|
|
||
|
|
#define __NVIC_SetPriorityGrouping(X) (void)(X)
|
||
|
|
#define __NVIC_GetPriorityGrouping() (0U)
|
||
|
|
|
||
|
|
/**
|
||
|
|
\brief Enable Interrupt
|
||
|
|
\details Enables a device specific interrupt in the NVIC interrupt controller.
|
||
|
|
\param [in] IRQn Device specific interrupt number.
|
||
|
|
\note IRQn must not be negative.
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
|
||
|
|
{
|
||
|
|
if ((int32_t)(IRQn) >= 0)
|
||
|
|
{
|
||
|
|
NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
\brief Get Interrupt Enable status
|
||
|
|
\details Returns a device specific interrupt enable status from the NVIC interrupt controller.
|
||
|
|
\param [in] IRQn Device specific interrupt number.
|
||
|
|
\return 0 Interrupt is not enabled.
|
||
|
|
\return 1 Interrupt is enabled.
|
||
|
|
\note IRQn must not be negative.
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
|
||
|
|
{
|
||
|
|
if ((int32_t)(IRQn) >= 0)
|
||
|
|
{
|
||
|
|
return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
return(0U);
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
\brief Disable Interrupt
|
||
|
|
\details Disables a device specific interrupt in the NVIC interrupt controller.
|
||
|
|
\param [in] IRQn Device specific interrupt number.
|
||
|
|
\note IRQn must not be negative.
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
|
||
|
|
{
|
||
|
|
if ((int32_t)(IRQn) >= 0)
|
||
|
|
{
|
||
|
|
NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
|
||
|
|
__DSB();
|
||
|
|
__ISB();
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
\brief Get Pending Interrupt
|
||
|
|
\details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
|
||
|
|
\param [in] IRQn Device specific interrupt number.
|
||
|
|
\return 0 Interrupt status is not pending.
|
||
|
|
\return 1 Interrupt status is pending.
|
||
|
|
\note IRQn must not be negative.
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
|
||
|
|
{
|
||
|
|
if ((int32_t)(IRQn) >= 0)
|
||
|
|
{
|
||
|
|
return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
return(0U);
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
\brief Set Pending Interrupt
|
||
|
|
\details Sets the pending bit of a device specific interrupt in the NVIC pending register.
|
||
|
|
\param [in] IRQn Device specific interrupt number.
|
||
|
|
\note IRQn must not be negative.
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
|
||
|
|
{
|
||
|
|
if ((int32_t)(IRQn) >= 0)
|
||
|
|
{
|
||
|
|
NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
\brief Clear Pending Interrupt
|
||
|
|
\details Clears the pending bit of a device specific interrupt in the NVIC pending register.
|
||
|
|
\param [in] IRQn Device specific interrupt number.
|
||
|
|
\note IRQn must not be negative.
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
|
||
|
|
{
|
||
|
|
if ((int32_t)(IRQn) >= 0)
|
||
|
|
{
|
||
|
|
NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
\brief Set Interrupt Priority
|
||
|
|
\details Sets the priority of a device specific interrupt or a processor exception.
|
||
|
|
The interrupt number can be positive to specify a device specific interrupt,
|
||
|
|
or negative to specify a processor exception.
|
||
|
|
\param [in] IRQn Interrupt number.
|
||
|
|
\param [in] priority Priority to set.
|
||
|
|
\note The priority cannot be set for every processor exception.
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
|
||
|
|
{
|
||
|
|
if ((int32_t)(IRQn) >= 0)
|
||
|
|
{
|
||
|
|
NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
|
||
|
|
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
|
||
|
|
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
\brief Get Interrupt Priority
|
||
|
|
\details Reads the priority of a device specific interrupt or a processor exception.
|
||
|
|
The interrupt number can be positive to specify a device specific interrupt,
|
||
|
|
or negative to specify a processor exception.
|
||
|
|
\param [in] IRQn Interrupt number.
|
||
|
|
\return Interrupt Priority.
|
||
|
|
Value is aligned automatically to the implemented priority bits of the microcontroller.
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
|
||
|
|
{
|
||
|
|
|
||
|
|
if ((int32_t)(IRQn) >= 0)
|
||
|
|
{
|
||
|
|
return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
\brief Encode Priority
|
||
|
|
\details Encodes the priority for an interrupt with the given priority group,
|
||
|
|
preemptive priority value, and subpriority value.
|
||
|
|
In case of a conflict between priority grouping and available
|
||
|
|
priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
|
||
|
|
\param [in] PriorityGroup Used priority group.
|
||
|
|
\param [in] PreemptPriority Preemptive priority value (starting from 0).
|
||
|
|
\param [in] SubPriority Subpriority value (starting from 0).
|
||
|
|
\return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
|
||
|
|
{
|
||
|
|
uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
|
||
|
|
uint32_t PreemptPriorityBits;
|
||
|
|
uint32_t SubPriorityBits;
|
||
|
|
|
||
|
|
PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
|
||
|
|
SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
|
||
|
|
|
||
|
|
return (
|
||
|
|
((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
|
||
|
|
((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
|
||
|
|
);
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
\brief Decode Priority
|
||
|
|
\details Decodes an interrupt priority value with a given priority group to
|
||
|
|
preemptive priority value and subpriority value.
|
||
|
|
In case of a conflict between priority grouping and available
|
||
|
|
priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
|
||
|
|
\param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
|
||
|
|
\param [in] PriorityGroup Used priority group.
|
||
|
|
\param [out] pPreemptPriority Preemptive priority value (starting from 0).
|
||
|
|
\param [out] pSubPriority Subpriority value (starting from 0).
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
|
||
|
|
{
|
||
|
|
uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
|
||
|
|
uint32_t PreemptPriorityBits;
|
||
|
|
uint32_t SubPriorityBits;
|
||
|
|
|
||
|
|
PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
|
||
|
|
SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
|
||
|
|
|
||
|
|
*pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
|
||
|
|
*pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
\brief Set Interrupt Vector
|
||
|
|
\details Sets an interrupt vector in SRAM based interrupt vector table.
|
||
|
|
The interrupt number can be positive to specify a device specific interrupt,
|
||
|
|
or negative to specify a processor exception.
|
||
|
|
VTOR must been relocated to SRAM before.
|
||
|
|
If VTOR is not present address 0 must be mapped to SRAM.
|
||
|
|
\param [in] IRQn Interrupt number
|
||
|
|
\param [in] vector Address of interrupt handler function
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
|
||
|
|
{
|
||
|
|
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
|
||
|
|
uint32_t *vectors = (uint32_t *)SCB->VTOR;
|
||
|
|
#else
|
||
|
|
uint32_t *vectors = (uint32_t *)0x0U;
|
||
|
|
#endif
|
||
|
|
vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
\brief Get Interrupt Vector
|
||
|
|
\details Reads an interrupt vector from interrupt vector table.
|
||
|
|
The interrupt number can be positive to specify a device specific interrupt,
|
||
|
|
or negative to specify a processor exception.
|
||
|
|
\param [in] IRQn Interrupt number.
|
||
|
|
\return Address of interrupt handler function
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
|
||
|
|
{
|
||
|
|
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U)
|
||
|
|
uint32_t *vectors = (uint32_t *)SCB->VTOR;
|
||
|
|
#else
|
||
|
|
uint32_t *vectors = (uint32_t *)0x0U;
|
||
|
|
#endif
|
||
|
|
return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
|
||
|
|
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/**
|
||
|
|
\brief System Reset
|
||
|
|
\details Initiates a system reset request to reset the MCU.
|
||
|
|
*/
|
||
|
|
__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
|
||
|
|
{
|
||
|
|
__DSB(); /* Ensure all outstanding memory accesses included
|
||
|
|
buffered write are completed before reset */
|
||
|
|
SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
|
||
|
|
SCB_AIRCR_SYSRESETREQ_Msk);
|
||
|
|
__DSB(); /* Ensure completion of memory access */
|
||
|
|
|
||
|
|
for(;;) /* wait until reset */
|
||
|
|
{
|
||
|
|
__NOP();
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
/*@} end of CMSIS_Core_NVICFunctions */
|
||
|
|
|
||
|
|
/* ########################## MPU functions #################################### */
|
||
|
|
|
||
|
|
#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U)
|
||
|
|
|
||
|
|
#include "mpu_armv7.h"
|
||
|
|
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/* ########################## FPU functions #################################### */
|
||
|
|
/**
|
||
|
|
\ingroup CMSIS_Core_FunctionInterface
|
||
|
|
\defgroup CMSIS_Core_FpuFunctions FPU Functions
|
||
|
|
\brief Function that provides FPU type.
|
||
|
|
@{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
\brief get FPU type
|
||
|
|
\details returns the FPU type
|
||
|
|
\returns
|
||
|
|
- \b 0: No FPU
|
||
|
|
- \b 1: Single precision FPU
|
||
|
|
- \b 2: Double + Single precision FPU
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE uint32_t SCB_GetFPUType(void)
|
||
|
|
{
|
||
|
|
return 0U; /* No FPU */
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/*@} end of CMSIS_Core_FpuFunctions */
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
/* ################################## SysTick function ############################################ */
|
||
|
|
/**
|
||
|
|
\ingroup CMSIS_Core_FunctionInterface
|
||
|
|
\defgroup CMSIS_Core_SysTickFunctions SysTick Functions
|
||
|
|
\brief Functions that configure the System.
|
||
|
|
@{
|
||
|
|
*/
|
||
|
|
|
||
|
|
#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
|
||
|
|
|
||
|
|
/**
|
||
|
|
\brief System Tick Configuration
|
||
|
|
\details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
|
||
|
|
Counter is in free running mode to generate periodic interrupts.
|
||
|
|
\param [in] ticks Number of ticks between two interrupts.
|
||
|
|
\return 0 Function succeeded.
|
||
|
|
\return 1 Function failed.
|
||
|
|
\note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
|
||
|
|
function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
|
||
|
|
must contain a vendor-specific implementation of this function.
|
||
|
|
*/
|
||
|
|
__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
|
||
|
|
{
|
||
|
|
if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
|
||
|
|
{
|
||
|
|
return (1UL); /* Reload value impossible */
|
||
|
|
}
|
||
|
|
|
||
|
|
SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
|
||
|
|
NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
|
||
|
|
SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
|
||
|
|
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
|
||
|
|
SysTick_CTRL_TICKINT_Msk |
|
||
|
|
SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
|
||
|
|
return (0UL); /* Function successful */
|
||
|
|
}
|
||
|
|
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/*@} end of CMSIS_Core_SysTickFunctions */
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
#ifdef __cplusplus
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#endif /* __CORE_CM0PLUS_H_DEPENDANT */
|
||
|
|
|
||
|
|
#endif /* __CMSIS_GENERIC */
|