90 lines
4.1 KiB
CMake
90 lines
4.1 KiB
CMake
#THIS FILE IS AUTO GENERATED FROM THE TEMPLATE! DO NOT CHANGE!
|
|
set(CMAKE_SYSTEM_NAME Generic)
|
|
set(CMAKE_SYSTEM_VERSION 1)
|
|
cmake_minimum_required(VERSION 3.25)
|
|
|
|
# specify cross-compilers and tools
|
|
set(CMAKE_C_COMPILER arm-none-eabi-gcc)
|
|
set(CMAKE_CXX_COMPILER arm-none-eabi-g++)
|
|
set(CMAKE_ASM_COMPILER arm-none-eabi-gcc)
|
|
set(CMAKE_AR arm-none-eabi-ar)
|
|
set(CMAKE_OBJCOPY arm-none-eabi-objcopy)
|
|
set(CMAKE_OBJDUMP arm-none-eabi-objdump)
|
|
set(SIZE arm-none-eabi-size)
|
|
set(CMAKE_TRY_COMPILE_TARGET_TYPE STATIC_LIBRARY)
|
|
|
|
# project settings
|
|
project(wheel_legged C CXX ASM)
|
|
set(CMAKE_CXX_STANDARD 11)
|
|
set(CMAKE_C_STANDARD 11)
|
|
|
|
#Uncomment for hardware floating point
|
|
add_compile_definitions(ARM_MATH_CM4;ARM_MATH_MATRIX_CHECK;ARM_MATH_ROUNDING)
|
|
add_compile_options(-mfloat-abi=hard -mfpu=fpv4-sp-d16)
|
|
add_link_options(-mfloat-abi=hard -mfpu=fpv4-sp-d16)
|
|
|
|
#Uncomment for software floating point
|
|
#add_compile_options(-mfloat-abi=soft)
|
|
|
|
add_compile_options(-mcpu=cortex-m4 -mthumb -mthumb-interwork)
|
|
add_compile_options(-ffunction-sections -fdata-sections -fno-common -fmessage-length=0)
|
|
|
|
# uncomment to mitigate c++17 absolute addresses warnings
|
|
#set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-register")
|
|
|
|
# Enable assembler files preprocessing
|
|
add_compile_options($<$<COMPILE_LANGUAGE:ASM>:-x$<SEMICOLON>assembler-with-cpp>)
|
|
|
|
|
|
if ("${CMAKE_BUILD_TYPE}" STREQUAL "Release")
|
|
message(STATUS "Maximum optimization for speed")
|
|
add_compile_options(-Ofast)
|
|
elseif ("${CMAKE_BUILD_TYPE}" STREQUAL "RelWithDebInfo")
|
|
message(STATUS "Maximum optimization for speed, debug info included")
|
|
add_compile_options(-Ofast -g)
|
|
elseif ("${CMAKE_BUILD_TYPE}" STREQUAL "MinSizeRel")
|
|
message(STATUS "Maximum optimization for size")
|
|
add_compile_options(-Os)
|
|
else ()
|
|
message(STATUS "Minimal optimization, debug info included")
|
|
add_compile_options(-Og -g)
|
|
endif ()
|
|
|
|
include_directories(Inc Drivers/STM32F4xx_HAL_Driver/Inc Drivers/STM32F4xx_HAL_Driver/Inc/Legacy Middlewares/Third_Party/FreeRTOS/Source/include Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM4F Middlewares/ST/STM32_USB_Device_Library/Core/Inc Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc Drivers/CMSIS/Device/ST/STM32F4xx/Include Drivers/CMSIS/Include Middlewares/ST/ARM/DSP/Inc
|
|
bsp bsp/adc bsp/can bsp/dwt bsp/flash bsp/gpio bsp/iic bsp/log bsp/pwm bsp/spi bsp/usart bsp/usb
|
|
modules modules/alarm modules/algorithm modules/BMI088 modules/can_comm modules/daemon modules/encoder modules/imu modules/ist8310
|
|
modules/led modules/master_machine modules/message_center modules/motor modules/oled modules/referee modules/remote modules/standard_cmd
|
|
modules/super_cap modules/TFminiPlus modules/unicomm modules/vofa modules/power_meter modules/matrix
|
|
modules/motor/DJImotor modules/motor/HTmotor modules/motor/LKmotor modules/motor/servo_motor modules/motor/step_motor modules/motor/ECmotor
|
|
application application/chassis application/cmd application/gimbal application/shoot application/balance
|
|
Middlewares/Third_Party/SEGGER/RTT Middlewares/Third_Party/SEGGER/Config)
|
|
|
|
include_directories(Middlewares/ST/ARM/DSP/Inc)
|
|
|
|
|
|
|
|
|
|
add_definitions(-DDEBUG -DUSE_HAL_DRIVER -DSTM32F407xx)
|
|
|
|
file(GLOB_RECURSE SOURCES "Startup/*.*" "Src/*.*" "Middlewares/*.*" "Drivers/*.*"
|
|
"bsp/*.*" "application/*.*" "modules/*.*")
|
|
|
|
set(LINKER_SCRIPT ${CMAKE_SOURCE_DIR}/STM32F407IGHX_FLASH.ld)
|
|
|
|
add_link_options(-Wl,-gc-sections,--print-memory-usage,-Map=${PROJECT_BINARY_DIR}/${PROJECT_NAME}.map)
|
|
add_link_options(-mcpu=cortex-m4 -mthumb -mthumb-interwork)
|
|
add_link_options(-T ${LINKER_SCRIPT})
|
|
|
|
add_executable(${PROJECT_NAME}.elf ${SOURCES} ${LINKER_SCRIPT})
|
|
|
|
target_link_libraries(${PROJECT_NAME}.elf ${CMAKE_SOURCE_DIR}/Middlewares/ST/ARM/DSP/Lib/libarm_cortexM4lf_math.a)
|
|
|
|
set(HEX_FILE ${PROJECT_BINARY_DIR}/${PROJECT_NAME}.hex)
|
|
set(BIN_FILE ${PROJECT_BINARY_DIR}/${PROJECT_NAME}.bin)
|
|
|
|
add_custom_command(TARGET ${PROJECT_NAME}.elf POST_BUILD
|
|
COMMAND ${CMAKE_OBJCOPY} -Oihex $<TARGET_FILE:${PROJECT_NAME}.elf> ${HEX_FILE}
|
|
COMMAND ${CMAKE_OBJCOPY} -Obinary $<TARGET_FILE:${PROJECT_NAME}.elf> ${BIN_FILE}
|
|
COMMENT "Building ${HEX_FILE}
|
|
Building ${BIN_FILE}")
|