572 lines
20 KiB
C
572 lines
20 KiB
C
|
/**
|
||
|
|
******************************************************************************
|
||
|
|
* @file stm32f4xx_hal_pwr.c
|
||
|
|
* @author MCD Application Team
|
||
|
|
* @brief PWR HAL module driver.
|
||
|
|
* This file provides firmware functions to manage the following
|
||
|
|
* functionalities of the Power Controller (PWR) peripheral:
|
||
|
|
* + Initialization and de-initialization functions
|
||
|
|
* + Peripheral Control functions
|
||
|
|
*
|
||
|
|
******************************************************************************
|
||
|
|
* @attention
|
||
|
|
*
|
||
|
|
* Copyright (c) 2017 STMicroelectronics.
|
||
|
|
* All rights reserved.
|
||
|
|
*
|
||
|
|
* This software is licensed under terms that can be found in the LICENSE file in
|
||
|
|
* the root directory of this software component.
|
||
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||
|
|
******************************************************************************
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Includes ------------------------------------------------------------------*/
|
||
|
|
#include "stm32f4xx_hal.h"
|
||
|
|
|
||
|
|
/** @addtogroup STM32F4xx_HAL_Driver
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup PWR PWR
|
||
|
|
* @brief PWR HAL module driver
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifdef HAL_PWR_MODULE_ENABLED
|
||
|
|
|
||
|
|
/* Private typedef -----------------------------------------------------------*/
|
||
|
|
/* Private define ------------------------------------------------------------*/
|
||
|
|
/** @addtogroup PWR_Private_Constants
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#define PVD_MODE_IT 0x00010000U
|
||
|
|
#define PVD_MODE_EVT 0x00020000U
|
||
|
|
#define PVD_RISING_EDGE 0x00000001U
|
||
|
|
#define PVD_FALLING_EDGE 0x00000002U
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
/* Private macro -------------------------------------------------------------*/
|
||
|
|
/* Private variables ---------------------------------------------------------*/
|
||
|
|
/* Private function prototypes -----------------------------------------------*/
|
||
|
|
/* Private functions ---------------------------------------------------------*/
|
||
|
|
|
||
|
|
/** @defgroup PWR_Exported_Functions PWR Exported Functions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
|
||
|
|
* @brief Initialization and de-initialization functions
|
||
|
|
*
|
||
|
|
@verbatim
|
||
|
|
===============================================================================
|
||
|
|
##### Initialization and de-initialization functions #####
|
||
|
|
===============================================================================
|
||
|
|
[..]
|
||
|
|
After reset, the backup domain (RTC registers, RTC backup data
|
||
|
|
registers and backup SRAM) is protected against possible unwanted
|
||
|
|
write accesses.
|
||
|
|
To enable access to the RTC Domain and RTC registers, proceed as follows:
|
||
|
|
(+) Enable the Power Controller (PWR) APB1 interface clock using the
|
||
|
|
__HAL_RCC_PWR_CLK_ENABLE() macro.
|
||
|
|
(+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
|
||
|
|
|
||
|
|
@endverbatim
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Deinitializes the HAL PWR peripheral registers to their default reset values.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void HAL_PWR_DeInit(void)
|
||
|
|
{
|
||
|
|
__HAL_RCC_PWR_FORCE_RESET();
|
||
|
|
__HAL_RCC_PWR_RELEASE_RESET();
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enables access to the backup domain (RTC registers, RTC
|
||
|
|
* backup data registers and backup SRAM).
|
||
|
|
* @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the
|
||
|
|
* Backup Domain Access should be kept enabled.
|
||
|
|
* @note The following sequence is required to bypass the delay between
|
||
|
|
* DBP bit programming and the effective enabling of the backup domain.
|
||
|
|
* Please check the Errata Sheet for more details under "Possible delay
|
||
|
|
* in backup domain protection disabling/enabling after programming the
|
||
|
|
* DBP bit" section.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void HAL_PWR_EnableBkUpAccess(void)
|
||
|
|
{
|
||
|
|
__IO uint32_t dummyread;
|
||
|
|
*(__IO uint32_t *) CR_DBP_BB = (uint32_t)ENABLE;
|
||
|
|
dummyread = PWR->CR;
|
||
|
|
UNUSED(dummyread);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disables access to the backup domain (RTC registers, RTC
|
||
|
|
* backup data registers and backup SRAM).
|
||
|
|
* @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the
|
||
|
|
* Backup Domain Access should be kept enabled.
|
||
|
|
* @note The following sequence is required to bypass the delay between
|
||
|
|
* DBP bit programming and the effective disabling of the backup domain.
|
||
|
|
* Please check the Errata Sheet for more details under "Possible delay
|
||
|
|
* in backup domain protection disabling/enabling after programming the
|
||
|
|
* DBP bit" section.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void HAL_PWR_DisableBkUpAccess(void)
|
||
|
|
{
|
||
|
|
__IO uint32_t dummyread;
|
||
|
|
*(__IO uint32_t *) CR_DBP_BB = (uint32_t)DISABLE;
|
||
|
|
dummyread = PWR->CR;
|
||
|
|
UNUSED(dummyread);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions
|
||
|
|
* @brief Low Power modes configuration functions
|
||
|
|
*
|
||
|
|
@verbatim
|
||
|
|
|
||
|
|
===============================================================================
|
||
|
|
##### Peripheral Control functions #####
|
||
|
|
===============================================================================
|
||
|
|
|
||
|
|
*** PVD configuration ***
|
||
|
|
=========================
|
||
|
|
[..]
|
||
|
|
(+) The PVD is used to monitor the VDD power supply by comparing it to a
|
||
|
|
threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR).
|
||
|
|
(+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower
|
||
|
|
than the PVD threshold. This event is internally connected to the EXTI
|
||
|
|
line16 and can generate an interrupt if enabled. This is done through
|
||
|
|
__HAL_PWR_PVD_EXTI_ENABLE_IT() macro.
|
||
|
|
(+) The PVD is stopped in Standby mode.
|
||
|
|
|
||
|
|
*** Wake-up pin configuration ***
|
||
|
|
================================
|
||
|
|
[..]
|
||
|
|
(+) Wake-up pin is used to wake up the system from Standby mode. This pin is
|
||
|
|
forced in input pull-down configuration and is active on rising edges.
|
||
|
|
(+) There is one Wake-up pin: Wake-up Pin 1 on PA.00.
|
||
|
|
(++) For STM32F446xx there are two Wake-Up pins: Pin1 on PA.00 and Pin2 on PC.13
|
||
|
|
(++) For STM32F410xx/STM32F412xx/STM32F413xx/STM32F423xx there are three Wake-Up pins: Pin1 on PA.00, Pin2 on PC.00 and Pin3 on PC.01
|
||
|
|
|
||
|
|
*** Low Power modes configuration ***
|
||
|
|
=====================================
|
||
|
|
[..]
|
||
|
|
The devices feature 3 low-power modes:
|
||
|
|
(+) Sleep mode: Cortex-M4 core stopped, peripherals kept running.
|
||
|
|
(+) Stop mode: all clocks are stopped, regulator running, regulator
|
||
|
|
in low power mode
|
||
|
|
(+) Standby mode: 1.2V domain powered off.
|
||
|
|
|
||
|
|
*** Sleep mode ***
|
||
|
|
==================
|
||
|
|
[..]
|
||
|
|
(+) Entry:
|
||
|
|
The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI)
|
||
|
|
functions with
|
||
|
|
(++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
|
||
|
|
(++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
|
||
|
|
|
||
|
|
-@@- The Regulator parameter is not used for the STM32F4 family
|
||
|
|
and is kept as parameter just to maintain compatibility with the
|
||
|
|
lower power families (STM32L).
|
||
|
|
(+) Exit:
|
||
|
|
Any peripheral interrupt acknowledged by the nested vectored interrupt
|
||
|
|
controller (NVIC) can wake up the device from Sleep mode.
|
||
|
|
|
||
|
|
*** Stop mode ***
|
||
|
|
=================
|
||
|
|
[..]
|
||
|
|
In Stop mode, all clocks in the 1.2V domain are stopped, the PLL, the HSI,
|
||
|
|
and the HSE RC oscillators are disabled. Internal SRAM and register contents
|
||
|
|
are preserved.
|
||
|
|
The voltage regulator can be configured either in normal or low-power mode.
|
||
|
|
To minimize the consumption In Stop mode, FLASH can be powered off before
|
||
|
|
entering the Stop mode using the HAL_PWREx_EnableFlashPowerDown() function.
|
||
|
|
It can be switched on again by software after exiting the Stop mode using
|
||
|
|
the HAL_PWREx_DisableFlashPowerDown() function.
|
||
|
|
|
||
|
|
(+) Entry:
|
||
|
|
The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON)
|
||
|
|
function with:
|
||
|
|
(++) Main regulator ON.
|
||
|
|
(++) Low Power regulator ON.
|
||
|
|
(+) Exit:
|
||
|
|
Any EXTI Line (Internal or External) configured in Interrupt/Event mode.
|
||
|
|
|
||
|
|
*** Standby mode ***
|
||
|
|
====================
|
||
|
|
[..]
|
||
|
|
(+)
|
||
|
|
The Standby mode allows to achieve the lowest power consumption. It is based
|
||
|
|
on the Cortex-M4 deep sleep mode, with the voltage regulator disabled.
|
||
|
|
The 1.2V domain is consequently powered off. The PLL, the HSI oscillator and
|
||
|
|
the HSE oscillator are also switched off. SRAM and register contents are lost
|
||
|
|
except for the RTC registers, RTC backup registers, backup SRAM and Standby
|
||
|
|
circuitry.
|
||
|
|
|
||
|
|
The voltage regulator is OFF.
|
||
|
|
|
||
|
|
(++) Entry:
|
||
|
|
(+++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function.
|
||
|
|
(++) Exit:
|
||
|
|
(+++) WKUP pin rising edge, RTC alarm (Alarm A and Alarm B), RTC wake-up,
|
||
|
|
tamper event, time-stamp event, external reset in NRST pin, IWDG reset.
|
||
|
|
|
||
|
|
*** Auto-wake-up (AWU) from low-power mode ***
|
||
|
|
=============================================
|
||
|
|
[..]
|
||
|
|
|
||
|
|
(+) The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC
|
||
|
|
Wake-up event, a tamper event or a time-stamp event, without depending on
|
||
|
|
an external interrupt (Auto-wake-up mode).
|
||
|
|
|
||
|
|
(+) RTC auto-wake-up (AWU) from the Stop and Standby modes
|
||
|
|
|
||
|
|
(++) To wake up from the Stop mode with an RTC alarm event, it is necessary to
|
||
|
|
configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function.
|
||
|
|
|
||
|
|
(++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it
|
||
|
|
is necessary to configure the RTC to detect the tamper or time stamp event using the
|
||
|
|
HAL_RTCEx_SetTimeStamp_IT() or HAL_RTCEx_SetTamper_IT() functions.
|
||
|
|
|
||
|
|
(++) To wake up from the Stop mode with an RTC Wake-up event, it is necessary to
|
||
|
|
configure the RTC to generate the RTC Wake-up event using the HAL_RTCEx_SetWakeUpTimer_IT() function.
|
||
|
|
|
||
|
|
@endverbatim
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD).
|
||
|
|
* @param sConfigPVD pointer to an PWR_PVDTypeDef structure that contains the configuration
|
||
|
|
* information for the PVD.
|
||
|
|
* @note Refer to the electrical characteristics of your device datasheet for
|
||
|
|
* more details about the voltage threshold corresponding to each
|
||
|
|
* detection level.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD)
|
||
|
|
{
|
||
|
|
/* Check the parameters */
|
||
|
|
assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel));
|
||
|
|
assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode));
|
||
|
|
|
||
|
|
/* Set PLS[7:5] bits according to PVDLevel value */
|
||
|
|
MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel);
|
||
|
|
|
||
|
|
/* Clear any previous config. Keep it clear if no event or IT mode is selected */
|
||
|
|
__HAL_PWR_PVD_EXTI_DISABLE_EVENT();
|
||
|
|
__HAL_PWR_PVD_EXTI_DISABLE_IT();
|
||
|
|
__HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();
|
||
|
|
__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
|
||
|
|
|
||
|
|
/* Configure interrupt mode */
|
||
|
|
if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT)
|
||
|
|
{
|
||
|
|
__HAL_PWR_PVD_EXTI_ENABLE_IT();
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Configure event mode */
|
||
|
|
if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT)
|
||
|
|
{
|
||
|
|
__HAL_PWR_PVD_EXTI_ENABLE_EVENT();
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Configure the edge */
|
||
|
|
if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE)
|
||
|
|
{
|
||
|
|
__HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();
|
||
|
|
}
|
||
|
|
|
||
|
|
if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE)
|
||
|
|
{
|
||
|
|
__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enables the Power Voltage Detector(PVD).
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void HAL_PWR_EnablePVD(void)
|
||
|
|
{
|
||
|
|
*(__IO uint32_t *) CR_PVDE_BB = (uint32_t)ENABLE;
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disables the Power Voltage Detector(PVD).
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void HAL_PWR_DisablePVD(void)
|
||
|
|
{
|
||
|
|
*(__IO uint32_t *) CR_PVDE_BB = (uint32_t)DISABLE;
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enables the Wake-up PINx functionality.
|
||
|
|
* @param WakeUpPinx Specifies the Power Wake-Up pin to enable.
|
||
|
|
* This parameter can be one of the following values:
|
||
|
|
* @arg PWR_WAKEUP_PIN1
|
||
|
|
* @arg PWR_WAKEUP_PIN2 available only on STM32F410xx/STM32F446xx/STM32F412xx/STM32F413xx/STM32F423xx devices
|
||
|
|
* @arg PWR_WAKEUP_PIN3 available only on STM32F410xx/STM32F412xx/STM32F413xx/STM32F423xx devices
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx)
|
||
|
|
{
|
||
|
|
/* Check the parameter */
|
||
|
|
assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
|
||
|
|
|
||
|
|
/* Enable the wake up pin */
|
||
|
|
SET_BIT(PWR->CSR, WakeUpPinx);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disables the Wake-up PINx functionality.
|
||
|
|
* @param WakeUpPinx Specifies the Power Wake-Up pin to disable.
|
||
|
|
* This parameter can be one of the following values:
|
||
|
|
* @arg PWR_WAKEUP_PIN1
|
||
|
|
* @arg PWR_WAKEUP_PIN2 available only on STM32F410xx/STM32F446xx/STM32F412xx/STM32F413xx/STM32F423xx devices
|
||
|
|
* @arg PWR_WAKEUP_PIN3 available only on STM32F410xx/STM32F412xx/STM32F413xx/STM32F423xx devices
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
|
||
|
|
{
|
||
|
|
/* Check the parameter */
|
||
|
|
assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
|
||
|
|
|
||
|
|
/* Disable the wake up pin */
|
||
|
|
CLEAR_BIT(PWR->CSR, WakeUpPinx);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enters Sleep mode.
|
||
|
|
*
|
||
|
|
* @note In Sleep mode, all I/O pins keep the same state as in Run mode.
|
||
|
|
*
|
||
|
|
* @note In Sleep mode, the systick is stopped to avoid exit from this mode with
|
||
|
|
* systick interrupt when used as time base for Timeout
|
||
|
|
*
|
||
|
|
* @param Regulator Specifies the regulator state in SLEEP mode.
|
||
|
|
* This parameter can be one of the following values:
|
||
|
|
* @arg PWR_MAINREGULATOR_ON: SLEEP mode with regulator ON
|
||
|
|
* @arg PWR_LOWPOWERREGULATOR_ON: SLEEP mode with low power regulator ON
|
||
|
|
* @note This parameter is not used for the STM32F4 family and is kept as parameter
|
||
|
|
* just to maintain compatibility with the lower power families.
|
||
|
|
* @param SLEEPEntry Specifies if SLEEP mode in entered with WFI or WFE instruction.
|
||
|
|
* This parameter can be one of the following values:
|
||
|
|
* @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
|
||
|
|
* @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry)
|
||
|
|
{
|
||
|
|
/* Check the parameters */
|
||
|
|
assert_param(IS_PWR_REGULATOR(Regulator));
|
||
|
|
assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry));
|
||
|
|
|
||
|
|
/* Clear SLEEPDEEP bit of Cortex System Control Register */
|
||
|
|
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
|
||
|
|
|
||
|
|
/* Select SLEEP mode entry -------------------------------------------------*/
|
||
|
|
if(SLEEPEntry == PWR_SLEEPENTRY_WFI)
|
||
|
|
{
|
||
|
|
/* Request Wait For Interrupt */
|
||
|
|
__WFI();
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
/* Request Wait For Event */
|
||
|
|
__SEV();
|
||
|
|
__WFE();
|
||
|
|
__WFE();
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enters Stop mode.
|
||
|
|
* @note In Stop mode, all I/O pins keep the same state as in Run mode.
|
||
|
|
* @note When exiting Stop mode by issuing an interrupt or a wake-up event,
|
||
|
|
* the HSI RC oscillator is selected as system clock.
|
||
|
|
* @note When the voltage regulator operates in low power mode, an additional
|
||
|
|
* startup delay is incurred when waking up from Stop mode.
|
||
|
|
* By keeping the internal regulator ON during Stop mode, the consumption
|
||
|
|
* is higher although the startup time is reduced.
|
||
|
|
* @param Regulator Specifies the regulator state in Stop mode.
|
||
|
|
* This parameter can be one of the following values:
|
||
|
|
* @arg PWR_MAINREGULATOR_ON: Stop mode with regulator ON
|
||
|
|
* @arg PWR_LOWPOWERREGULATOR_ON: Stop mode with low power regulator ON
|
||
|
|
* @param STOPEntry Specifies if Stop mode in entered with WFI or WFE instruction.
|
||
|
|
* This parameter can be one of the following values:
|
||
|
|
* @arg PWR_STOPENTRY_WFI: Enter Stop mode with WFI instruction
|
||
|
|
* @arg PWR_STOPENTRY_WFE: Enter Stop mode with WFE instruction
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
|
||
|
|
{
|
||
|
|
/* Check the parameters */
|
||
|
|
assert_param(IS_PWR_REGULATOR(Regulator));
|
||
|
|
assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
|
||
|
|
|
||
|
|
/* Select the regulator state in Stop mode: Set PDDS and LPDS bits according to PWR_Regulator value */
|
||
|
|
MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS), Regulator);
|
||
|
|
|
||
|
|
/* Set SLEEPDEEP bit of Cortex System Control Register */
|
||
|
|
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
|
||
|
|
|
||
|
|
/* Select Stop mode entry --------------------------------------------------*/
|
||
|
|
if(STOPEntry == PWR_STOPENTRY_WFI)
|
||
|
|
{
|
||
|
|
/* Request Wait For Interrupt */
|
||
|
|
__WFI();
|
||
|
|
}
|
||
|
|
else
|
||
|
|
{
|
||
|
|
/* Request Wait For Event */
|
||
|
|
__SEV();
|
||
|
|
__WFE();
|
||
|
|
__WFE();
|
||
|
|
}
|
||
|
|
/* Reset SLEEPDEEP bit of Cortex System Control Register */
|
||
|
|
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enters Standby mode.
|
||
|
|
* @note In Standby mode, all I/O pins are high impedance except for:
|
||
|
|
* - Reset pad (still available)
|
||
|
|
* - RTC_AF1 pin (PC13) if configured for tamper, time-stamp, RTC
|
||
|
|
* Alarm out, or RTC clock calibration out.
|
||
|
|
* - RTC_AF2 pin (PI8) if configured for tamper or time-stamp.
|
||
|
|
* - WKUP pin 1 (PA0) if enabled.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void HAL_PWR_EnterSTANDBYMode(void)
|
||
|
|
{
|
||
|
|
/* Select Standby mode */
|
||
|
|
SET_BIT(PWR->CR, PWR_CR_PDDS);
|
||
|
|
|
||
|
|
/* Set SLEEPDEEP bit of Cortex System Control Register */
|
||
|
|
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
|
||
|
|
|
||
|
|
/* This option is used to ensure that store operations are completed */
|
||
|
|
#if defined ( __CC_ARM)
|
||
|
|
__force_stores();
|
||
|
|
#endif
|
||
|
|
/* Request Wait For Interrupt */
|
||
|
|
__WFI();
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief This function handles the PWR PVD interrupt request.
|
||
|
|
* @note This API should be called under the PVD_IRQHandler().
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void HAL_PWR_PVD_IRQHandler(void)
|
||
|
|
{
|
||
|
|
/* Check PWR Exti flag */
|
||
|
|
if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET)
|
||
|
|
{
|
||
|
|
/* PWR PVD interrupt user callback */
|
||
|
|
HAL_PWR_PVDCallback();
|
||
|
|
|
||
|
|
/* Clear PWR Exti pending bit */
|
||
|
|
__HAL_PWR_PVD_EXTI_CLEAR_FLAG();
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief PWR PVD interrupt callback
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
__weak void HAL_PWR_PVDCallback(void)
|
||
|
|
{
|
||
|
|
/* NOTE : This function Should not be modified, when the callback is needed,
|
||
|
|
the HAL_PWR_PVDCallback could be implemented in the user file
|
||
|
|
*/
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode.
|
||
|
|
* @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor
|
||
|
|
* re-enters SLEEP mode when an interruption handling is over.
|
||
|
|
* Setting this bit is useful when the processor is expected to run only on
|
||
|
|
* interruptions handling.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void HAL_PWR_EnableSleepOnExit(void)
|
||
|
|
{
|
||
|
|
/* Set SLEEPONEXIT bit of Cortex System Control Register */
|
||
|
|
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode.
|
||
|
|
* @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor
|
||
|
|
* re-enters SLEEP mode when an interruption handling is over.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void HAL_PWR_DisableSleepOnExit(void)
|
||
|
|
{
|
||
|
|
/* Clear SLEEPONEXIT bit of Cortex System Control Register */
|
||
|
|
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Enables CORTEX M4 SEVONPEND bit.
|
||
|
|
* @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes
|
||
|
|
* WFE to wake up when an interrupt moves from inactive to pended.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void HAL_PWR_EnableSEVOnPend(void)
|
||
|
|
{
|
||
|
|
/* Set SEVONPEND bit of Cortex System Control Register */
|
||
|
|
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Disables CORTEX M4 SEVONPEND bit.
|
||
|
|
* @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes
|
||
|
|
* WFE to wake up when an interrupt moves from inactive to pended.
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void HAL_PWR_DisableSEVOnPend(void)
|
||
|
|
{
|
||
|
|
/* Clear SEVONPEND bit of Cortex System Control Register */
|
||
|
|
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
#endif /* HAL_PWR_MODULE_ENABLED */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|