246 lines
6.4 KiB
C
246 lines
6.4 KiB
C
/* USER CODE BEGIN Header */
|
|
/**
|
|
******************************************************************************
|
|
* @file : main.c
|
|
* @brief : Main program body
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2022 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
/* USER CODE END Header */
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "main.h"
|
|
#include "cmsis_os.h"
|
|
#include "adc.h"
|
|
#include "can.h"
|
|
#include "dma.h"
|
|
#include "rng.h"
|
|
#include "rtc.h"
|
|
#include "spi.h"
|
|
#include "tim.h"
|
|
#include "usart.h"
|
|
#include "usb_device.h"
|
|
#include "gpio.h"
|
|
|
|
/* Private includes ----------------------------------------------------------*/
|
|
/* USER CODE BEGIN Includes */
|
|
#include "remote_control.h"
|
|
#include "bsp_usart.h"
|
|
#include "bsp_can.h"
|
|
#include "can.h"
|
|
#include "dji_motor.h"
|
|
#include "motor_task.h"
|
|
/* USER CODE END Includes */
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* USER CODE BEGIN PTD */
|
|
|
|
/* USER CODE END PTD */
|
|
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* USER CODE BEGIN PD */
|
|
/* USER CODE END PD */
|
|
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* USER CODE BEGIN PM */
|
|
|
|
/* USER CODE END PM */
|
|
|
|
/* Private variables ---------------------------------------------------------*/
|
|
|
|
/* USER CODE BEGIN PV */
|
|
|
|
/* USER CODE END PV */
|
|
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
void SystemClock_Config(void);
|
|
void MX_FREERTOS_Init(void);
|
|
/* USER CODE BEGIN PFP */
|
|
|
|
/* USER CODE END PFP */
|
|
|
|
/* Private user code ---------------------------------------------------------*/
|
|
/* USER CODE BEGIN 0 */
|
|
|
|
/* USER CODE END 0 */
|
|
|
|
/**
|
|
* @brief The application entry point.
|
|
* @retval int
|
|
*/
|
|
int main(void)
|
|
{
|
|
/* USER CODE BEGIN 1 */
|
|
|
|
/* USER CODE END 1 */
|
|
|
|
/* MCU Configuration--------------------------------------------------------*/
|
|
|
|
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
|
HAL_Init();
|
|
|
|
/* USER CODE BEGIN Init */
|
|
|
|
/* USER CODE END Init */
|
|
|
|
/* Configure the system clock */
|
|
SystemClock_Config();
|
|
|
|
/* USER CODE BEGIN SysInit */
|
|
|
|
/* USER CODE END SysInit */
|
|
|
|
/* Initialize all configured peripherals */
|
|
MX_GPIO_Init();
|
|
MX_DMA_Init();
|
|
MX_ADC1_Init();
|
|
MX_CAN1_Init();
|
|
MX_CAN2_Init();
|
|
MX_SPI1_Init();
|
|
MX_TIM4_Init();
|
|
MX_TIM5_Init();
|
|
MX_USART3_UART_Init();
|
|
MX_RNG_Init();
|
|
MX_RTC_Init();
|
|
MX_TIM1_Init();
|
|
MX_TIM10_Init();
|
|
MX_USART1_UART_Init();
|
|
MX_USART6_UART_Init();
|
|
/* USER CODE BEGIN 2 */
|
|
RC_init(&huart3);
|
|
DWT_Init(168);
|
|
Motor_Init_Config_s config = {
|
|
.motor_type = M3508,
|
|
.can_init_config = {
|
|
.can_handle = &hcan1,
|
|
.tx_id = 1},
|
|
.controller_setting_init_config = {.angle_feedback_source = MOTOR_FEED,
|
|
.close_loop_type = SPEED_LOOP | CURRENT_LOOP,
|
|
.speed_feedback_source = MOTOR_FEED,
|
|
.reverse_flag = MOTOR_DIRECTION_NORMAL},
|
|
.controller_param_init_config = {.current_PID = {
|
|
.Improve = 0,
|
|
.Kp = 1,
|
|
.Ki = 0,
|
|
.Kd = 0,
|
|
.DeadBand = 0,
|
|
.MaxOut = 4000},
|
|
.speed_PID = {
|
|
.Improve = 0,
|
|
.Kp = 1,
|
|
.Ki = 0,
|
|
.Kd = 0,
|
|
.DeadBand = 0,
|
|
.MaxOut = 4000}}};
|
|
dji_motor_instance *djimotor = DJIMotorInit(config);
|
|
/* USER CODE END 2 */
|
|
|
|
/* Call init function for freertos objects (in freertos.c) */
|
|
// MX_FREERTOS_Init();
|
|
|
|
// /* Start scheduler */
|
|
// osKernelStart();
|
|
|
|
/* We should never get here as control is now taken by the scheduler */
|
|
/* Infinite loop */
|
|
/* USER CODE BEGIN WHILE */
|
|
while (1)
|
|
{
|
|
/* USER CODE END WHILE */
|
|
|
|
DJIMotorSetRef(djimotor, get_remote_control_point()->rc.ch[0]);
|
|
MotorControlTask();
|
|
HAL_Delay(100);
|
|
/* USER CODE BEGIN 3 */
|
|
}
|
|
/* USER CODE END 3 */
|
|
}
|
|
|
|
/**
|
|
* @brief System Clock Configuration
|
|
* @retval None
|
|
*/
|
|
void SystemClock_Config(void)
|
|
{
|
|
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
|
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
|
|
|
/** Configure the main internal regulator output voltage
|
|
*/
|
|
__HAL_RCC_PWR_CLK_ENABLE();
|
|
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
|
|
|
/** Initializes the RCC Oscillators according to the specified parameters
|
|
* in the RCC_OscInitTypeDef structure.
|
|
*/
|
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
|
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
|
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
|
RCC_OscInitStruct.PLL.PLLM = 6;
|
|
RCC_OscInitStruct.PLL.PLLN = 168;
|
|
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
|
RCC_OscInitStruct.PLL.PLLQ = 7;
|
|
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
|
|
/** Initializes the CPU, AHB and APB buses clocks
|
|
*/
|
|
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
|
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
|
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
|
|
|
|
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
}
|
|
|
|
/* USER CODE BEGIN 4 */
|
|
|
|
/* USER CODE END 4 */
|
|
|
|
/**
|
|
* @brief This function is executed in case of error occurrence.
|
|
* @retval None
|
|
*/
|
|
void Error_Handler(void)
|
|
{
|
|
/* USER CODE BEGIN Error_Handler_Debug */
|
|
/* User can add his own implementation to report the HAL error return state */
|
|
__disable_irq();
|
|
while (1)
|
|
{
|
|
}
|
|
/* USER CODE END Error_Handler_Debug */
|
|
}
|
|
|
|
#ifdef USE_FULL_ASSERT
|
|
/**
|
|
* @brief Reports the name of the source file and the source line number
|
|
* where the assert_param error has occurred.
|
|
* @param file: pointer to the source file name
|
|
* @param line: assert_param error line source number
|
|
* @retval None
|
|
*/
|
|
void assert_failed(uint8_t *file, uint32_t line)
|
|
{
|
|
/* USER CODE BEGIN 6 */
|
|
/* User can add his own implementation to report the file name and line number,
|
|
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
|
/* USER CODE END 6 */
|
|
}
|
|
#endif /* USE_FULL_ASSERT */
|