From 25a0e24529a0a183ba85e63d327eaea32e5283a8 Mon Sep 17 00:00:00 2001 From: NeoZng Date: Mon, 26 Dec 2022 15:40:20 +0800 Subject: [PATCH] =?UTF-8?q?=E6=B7=BB=E5=8A=A0=E4=BA=86iic=E5=92=8Cspi?= =?UTF-8?q?=E7=9A=84HAL=E9=85=8D=E7=BD=AE?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- .gitignore | 1 + .mxproject | 10 +- .vscode/settings.json | 55 - .../Inc/stm32f4xx_hal_i2c.h | 741 ++ .../Inc/stm32f4xx_hal_i2c_ex.h | 115 + .../Inc/stm32f4xx_ll_i2c.h | 1890 +++++ .../Src/stm32f4xx_hal_i2c.c | 7524 +++++++++++++++++ .../Src/stm32f4xx_hal_i2c_ex.c | 182 + HAL_N_Middlewares/Inc/i2c.h | 55 + HAL_N_Middlewares/Inc/main.h | 5 + HAL_N_Middlewares/Inc/spi.h | 3 + HAL_N_Middlewares/Inc/stm32f4xx_hal_conf.h | 75 +- HAL_N_Middlewares/Inc/usbd_conf.h | 4 +- HAL_N_Middlewares/Src/gpio.c | 17 + HAL_N_Middlewares/Src/i2c.c | 198 + HAL_N_Middlewares/Src/spi.c | 77 + HAL_N_Middlewares/Src/usbd_desc.c | 4 +- Makefile | 3 + basic_framework.ioc | 158 +- bsp/bsp_can.c | 1 - bsp/bsp_spi.h | 4 + 21 files changed, 10970 insertions(+), 152 deletions(-) delete mode 100644 .vscode/settings.json create mode 100644 HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h create mode 100644 HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c_ex.h create mode 100644 HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_i2c.h create mode 100644 HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c create mode 100644 HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.c create mode 100644 HAL_N_Middlewares/Inc/i2c.h create mode 100644 HAL_N_Middlewares/Src/i2c.c diff --git a/.gitignore b/.gitignore index bbb2d53..844cd0c 100644 --- a/.gitignore +++ b/.gitignore @@ -52,3 +52,4 @@ build .vscode/.cortex-debug.peripherals.state.json .vscode/.cortex-debug.registers.state.json *.jdebug* +settings.json \ No newline at end of file diff --git a/.mxproject b/.mxproject index 7284037..a03dc7e 100644 --- a/.mxproject +++ b/.mxproject @@ -1,22 +1,22 @@ [PreviousLibFiles] -LibFiles=Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pcd.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pcd_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_usb.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_bus.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_system.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_utils.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ramfunc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dmamux.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal.h;Drivers\STM32F4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_def.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_adc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_adc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_adc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_can.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rng.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rng.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rtc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rtc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rtc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_spi.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_tim.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_uart.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_usart.h;Middlewares\Third_Party\FreeRTOS\Source\include\croutine.h;Middlewares\Third_Party\FreeRTOS\Source\include\deprecated_definitions.h;Middlewares\Third_Party\FreeRTOS\Source\include\event_groups.h;Middlewares\Third_Party\FreeRTOS\Source\include\FreeRTOS.h;Middlewares\Third_Party\FreeRTOS\Source\include\list.h;Middlewares\Third_Party\FreeRTOS\Source\include\message_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_prototypes.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_wrappers.h;Middlewares\Third_Party\FreeRTOS\Source\include\portable.h;Middlewares\Third_Party\FreeRTOS\Source\include\projdefs.h;Middlewares\Third_Party\FreeRTOS\Source\include\queue.h;Middlewares\Third_Party\FreeRTOS\Source\include\semphr.h;Middlewares\Third_Party\FreeRTOS\Source\include\stack_macros.h;Middlewares\Third_Party\FreeRTOS\Source\include\StackMacros.h;Middlewares\Third_Party\FreeRTOS\Source\include\stream_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\task.h;Middlewares\Third_Party\FreeRTOS\Source\include\timers.h;Middlewares\Third_Party\FreeRTOS\Source\include\atomic.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS\cmsis_os.h;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\portmacro.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_core.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_ctlreq.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_def.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_ioreq.h;Middlewares\ST\STM32_USB_Device_Library\Class\CDC\Inc\usbd_cdc.h;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pcd.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pcd_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_usb.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_adc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_can.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rng.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rtc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rtc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_spi.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c;Middlewares\Third_Party\FreeRTOS\Source\croutine.c;Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;Middlewares\Third_Party\FreeRTOS\Source\list.c;Middlewares\Third_Party\FreeRTOS\Source\queue.c;Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;Middlewares\Third_Party\FreeRTOS\Source\tasks.c;Middlewares\Third_Party\FreeRTOS\Source\timers.c;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS\cmsis_os.c;Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\port.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_core.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ctlreq.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ioreq.c;Middlewares\ST\STM32_USB_Device_Library\Class\CDC\Src\usbd_cdc.c;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pcd.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pcd_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_usb.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_bus.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_system.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_utils.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ramfunc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dmamux.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal.h;Drivers\STM32F4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_def.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_adc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_adc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_adc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_can.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rng.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rng.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rtc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rtc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rtc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_spi.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_tim.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_uart.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_usart.h;Middlewares\Third_Party\FreeRTOS\Source\include\croutine.h;Middlewares\Third_Party\FreeRTOS\Source\include\deprecated_definitions.h;Middlewares\Third_Party\FreeRTOS\Source\include\event_groups.h;Middlewares\Third_Party\FreeRTOS\Source\include\FreeRTOS.h;Middlewares\Third_Party\FreeRTOS\Source\include\list.h;Middlewares\Third_Party\FreeRTOS\Source\include\message_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_prototypes.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_wrappers.h;Middlewares\Third_Party\FreeRTOS\Source\include\portable.h;Middlewares\Third_Party\FreeRTOS\Source\include\projdefs.h;Middlewares\Third_Party\FreeRTOS\Source\include\queue.h;Middlewares\Third_Party\FreeRTOS\Source\include\semphr.h;Middlewares\Third_Party\FreeRTOS\Source\include\stack_macros.h;Middlewares\Third_Party\FreeRTOS\Source\include\StackMacros.h;Middlewares\Third_Party\FreeRTOS\Source\include\stream_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\task.h;Middlewares\Third_Party\FreeRTOS\Source\include\timers.h;Middlewares\Third_Party\FreeRTOS\Source\include\atomic.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS\cmsis_os.h;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\portmacro.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_core.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_ctlreq.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_def.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_ioreq.h;Middlewares\ST\STM32_USB_Device_Library\Class\CDC\Inc\usbd_cdc.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f407xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f4xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\system_stm32f4xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\tz_context.h; +LibFiles=Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pcd.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pcd_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_usb.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_bus.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_system.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_utils.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ramfunc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dmamux.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal.h;Drivers\STM32F4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_def.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_adc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_adc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_adc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_can.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2c.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_i2c.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2c_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rng.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rng.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rtc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rtc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rtc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_spi.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_tim.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_uart.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_usart.h;Middlewares\Third_Party\FreeRTOS\Source\include\croutine.h;Middlewares\Third_Party\FreeRTOS\Source\include\deprecated_definitions.h;Middlewares\Third_Party\FreeRTOS\Source\include\event_groups.h;Middlewares\Third_Party\FreeRTOS\Source\include\FreeRTOS.h;Middlewares\Third_Party\FreeRTOS\Source\include\list.h;Middlewares\Third_Party\FreeRTOS\Source\include\message_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_prototypes.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_wrappers.h;Middlewares\Third_Party\FreeRTOS\Source\include\portable.h;Middlewares\Third_Party\FreeRTOS\Source\include\projdefs.h;Middlewares\Third_Party\FreeRTOS\Source\include\queue.h;Middlewares\Third_Party\FreeRTOS\Source\include\semphr.h;Middlewares\Third_Party\FreeRTOS\Source\include\stack_macros.h;Middlewares\Third_Party\FreeRTOS\Source\include\StackMacros.h;Middlewares\Third_Party\FreeRTOS\Source\include\stream_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\task.h;Middlewares\Third_Party\FreeRTOS\Source\include\timers.h;Middlewares\Third_Party\FreeRTOS\Source\include\atomic.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS\cmsis_os.h;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\portmacro.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_core.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_ctlreq.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_def.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_ioreq.h;Middlewares\ST\STM32_USB_Device_Library\Class\CDC\Inc\usbd_cdc.h;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pcd.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pcd_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_usb.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_adc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_can.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rng.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rtc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rtc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_spi.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c;Middlewares\Third_Party\FreeRTOS\Source\croutine.c;Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;Middlewares\Third_Party\FreeRTOS\Source\list.c;Middlewares\Third_Party\FreeRTOS\Source\queue.c;Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;Middlewares\Third_Party\FreeRTOS\Source\tasks.c;Middlewares\Third_Party\FreeRTOS\Source\timers.c;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS\cmsis_os.c;Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\port.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_core.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ctlreq.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ioreq.c;Middlewares\ST\STM32_USB_Device_Library\Class\CDC\Src\usbd_cdc.c;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pcd.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pcd_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_usb.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_bus.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_system.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_utils.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ramfunc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dmamux.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal.h;Drivers\STM32F4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_def.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_adc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_adc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_adc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_can.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2c.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_i2c.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2c_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rng.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rng.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rtc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rtc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rtc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_spi.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_tim.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_uart.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_usart.h;Middlewares\Third_Party\FreeRTOS\Source\include\croutine.h;Middlewares\Third_Party\FreeRTOS\Source\include\deprecated_definitions.h;Middlewares\Third_Party\FreeRTOS\Source\include\event_groups.h;Middlewares\Third_Party\FreeRTOS\Source\include\FreeRTOS.h;Middlewares\Third_Party\FreeRTOS\Source\include\list.h;Middlewares\Third_Party\FreeRTOS\Source\include\message_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_prototypes.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_wrappers.h;Middlewares\Third_Party\FreeRTOS\Source\include\portable.h;Middlewares\Third_Party\FreeRTOS\Source\include\projdefs.h;Middlewares\Third_Party\FreeRTOS\Source\include\queue.h;Middlewares\Third_Party\FreeRTOS\Source\include\semphr.h;Middlewares\Third_Party\FreeRTOS\Source\include\stack_macros.h;Middlewares\Third_Party\FreeRTOS\Source\include\StackMacros.h;Middlewares\Third_Party\FreeRTOS\Source\include\stream_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\task.h;Middlewares\Third_Party\FreeRTOS\Source\include\timers.h;Middlewares\Third_Party\FreeRTOS\Source\include\atomic.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS\cmsis_os.h;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\portmacro.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_core.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_ctlreq.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_def.h;Middlewares\ST\STM32_USB_Device_Library\Core\Inc\usbd_ioreq.h;Middlewares\ST\STM32_USB_Device_Library\Class\CDC\Inc\usbd_cdc.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f407xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f4xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\system_stm32f4xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\tz_context.h; [PreviousUsedMakefileFiles] -SourceFiles=Src\main.c;Src\gpio.c;Src\freertos.c;Src\adc.c;Src\can.c;Src\dma.c;Src\rng.c;Src\rtc.c;Src\spi.c;Src\tim.c;Src\usart.c;Src\usb_device.c;Src\usbd_conf.c;Src\usbd_desc.c;Src\usbd_cdc_if.c;Src\stm32f4xx_it.c;Src\stm32f4xx_hal_msp.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pcd.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pcd_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_usb.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_adc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_can.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rng.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rtc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rtc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_spi.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c;Middlewares\Third_Party\FreeRTOS\Source\croutine.c;Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;Middlewares\Third_Party\FreeRTOS\Source\list.c;Middlewares\Third_Party\FreeRTOS\Source\queue.c;Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;Middlewares\Third_Party\FreeRTOS\Source\tasks.c;Middlewares\Third_Party\FreeRTOS\Source\timers.c;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS\cmsis_os.c;Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\port.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_core.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ctlreq.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ioreq.c;Middlewares\ST\STM32_USB_Device_Library\Class\CDC\Src\usbd_cdc.c;Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;Src\system_stm32f4xx.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pcd.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pcd_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_usb.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_adc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_can.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rng.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rtc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rtc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_spi.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c;Middlewares\Third_Party\FreeRTOS\Source\croutine.c;Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;Middlewares\Third_Party\FreeRTOS\Source\list.c;Middlewares\Third_Party\FreeRTOS\Source\queue.c;Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;Middlewares\Third_Party\FreeRTOS\Source\tasks.c;Middlewares\Third_Party\FreeRTOS\Source\timers.c;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS\cmsis_os.c;Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\port.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_core.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ctlreq.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ioreq.c;Middlewares\ST\STM32_USB_Device_Library\Class\CDC\Src\usbd_cdc.c;Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;Src\system_stm32f4xx.c;;;Middlewares\Third_Party\FreeRTOS\Source\croutine.c;Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;Middlewares\Third_Party\FreeRTOS\Source\list.c;Middlewares\Third_Party\FreeRTOS\Source\queue.c;Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;Middlewares\Third_Party\FreeRTOS\Source\tasks.c;Middlewares\Third_Party\FreeRTOS\Source\timers.c;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS\cmsis_os.c;Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\port.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_core.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ctlreq.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ioreq.c;Middlewares\ST\STM32_USB_Device_Library\Class\CDC\Src\usbd_cdc.c; +SourceFiles=Src\main.c;Src\gpio.c;Src\freertos.c;Src\adc.c;Src\can.c;Src\dma.c;Src\i2c.c;Src\rng.c;Src\rtc.c;Src\spi.c;Src\tim.c;Src\usart.c;Src\usb_device.c;Src\usbd_conf.c;Src\usbd_desc.c;Src\usbd_cdc_if.c;Src\stm32f4xx_it.c;Src\stm32f4xx_hal_msp.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pcd.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pcd_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_usb.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_adc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_can.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rng.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rtc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rtc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_spi.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c;Middlewares\Third_Party\FreeRTOS\Source\croutine.c;Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;Middlewares\Third_Party\FreeRTOS\Source\list.c;Middlewares\Third_Party\FreeRTOS\Source\queue.c;Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;Middlewares\Third_Party\FreeRTOS\Source\tasks.c;Middlewares\Third_Party\FreeRTOS\Source\timers.c;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS\cmsis_os.c;Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\port.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_core.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ctlreq.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ioreq.c;Middlewares\ST\STM32_USB_Device_Library\Class\CDC\Src\usbd_cdc.c;Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;Src\system_stm32f4xx.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pcd.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pcd_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_usb.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_ll_adc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_can.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rng.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rtc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rtc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_spi.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c;Middlewares\Third_Party\FreeRTOS\Source\croutine.c;Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;Middlewares\Third_Party\FreeRTOS\Source\list.c;Middlewares\Third_Party\FreeRTOS\Source\queue.c;Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;Middlewares\Third_Party\FreeRTOS\Source\tasks.c;Middlewares\Third_Party\FreeRTOS\Source\timers.c;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS\cmsis_os.c;Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\port.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_core.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ctlreq.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ioreq.c;Middlewares\ST\STM32_USB_Device_Library\Class\CDC\Src\usbd_cdc.c;Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;Src\system_stm32f4xx.c;;;Middlewares\Third_Party\FreeRTOS\Source\croutine.c;Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;Middlewares\Third_Party\FreeRTOS\Source\list.c;Middlewares\Third_Party\FreeRTOS\Source\queue.c;Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;Middlewares\Third_Party\FreeRTOS\Source\tasks.c;Middlewares\Third_Party\FreeRTOS\Source\timers.c;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS\cmsis_os.c;Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F\port.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_core.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ctlreq.c;Middlewares\ST\STM32_USB_Device_Library\Core\Src\usbd_ioreq.c;Middlewares\ST\STM32_USB_Device_Library\Class\CDC\Src\usbd_cdc.c; HeaderPath=Drivers\STM32F4xx_HAL_Driver\Inc;Drivers\STM32F4xx_HAL_Driver\Inc\Legacy;Middlewares\Third_Party\FreeRTOS\Source\include;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS;Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM4F;Middlewares\ST\STM32_USB_Device_Library\Core\Inc;Middlewares\ST\STM32_USB_Device_Library\Class\CDC\Inc;Drivers\CMSIS\Device\ST\STM32F4xx\Include;Drivers\CMSIS\Include;Middlewares\ST\ARM\DSP\Inc;Inc; CDefines=USE_HAL_DRIVER;STM32F407xx;USE_HAL_DRIVER;USE_HAL_DRIVER; [PreviousGenFiles] HeaderPath=..\Inc -HeaderFiles=gpio.h;FreeRTOSConfig.h;adc.h;can.h;dma.h;rng.h;rtc.h;spi.h;tim.h;usart.h;usb_device.h;usbd_conf.h;usbd_desc.h;usbd_cdc_if.h;stm32f4xx_it.h;stm32f4xx_hal_conf.h;main.h; +HeaderFiles=gpio.h;FreeRTOSConfig.h;adc.h;can.h;dma.h;i2c.h;rng.h;rtc.h;spi.h;tim.h;usart.h;usb_device.h;usbd_conf.h;usbd_desc.h;usbd_cdc_if.h;stm32f4xx_it.h;stm32f4xx_hal_conf.h;main.h; SourcePath=..\Src -SourceFiles=gpio.c;freertos.c;adc.c;can.c;dma.c;rng.c;rtc.c;spi.c;tim.c;usart.c;usb_device.c;usbd_conf.c;usbd_desc.c;usbd_cdc_if.c;stm32f4xx_it.c;stm32f4xx_hal_msp.c;main.c; +SourceFiles=gpio.c;freertos.c;adc.c;can.c;dma.c;i2c.c;rng.c;rtc.c;spi.c;tim.c;usart.c;usb_device.c;usbd_conf.c;usbd_desc.c;usbd_cdc_if.c;stm32f4xx_it.c;stm32f4xx_hal_msp.c;main.c; [ThirdPartyIp] ThirdPartyIpNumber=1 ThirdPartyIpName#0=STMicroelectronics.X-CUBE-ALGOBUILD.1.3.0 [ThirdPartyIp#STMicroelectronics.X-CUBE-ALGOBUILD.1.3.0] -library=..\Middlewares\ST\ARM\DSP\Lib\iar_cortexM4lf_math.a; +library=..\Middlewares\ST\ARM\DSP\Lib\libarm_cortexM4lf_math.a; header=..\Middlewares\ST\ARM\DSP\Inc\arm_math.h; diff --git a/.vscode/settings.json b/.vscode/settings.json deleted file mode 100644 index 10ac569..0000000 --- a/.vscode/settings.json +++ /dev/null @@ -1,55 +0,0 @@ -{ - "files.associations": { - "memory.h": "c", - "stdint.h": "c", - "led_task.h": "c", - "stdinf.h": "c", - "usart.h": "c", - "controller.h": "c", - "ins_task.h": "c", - "task.h": "c", - "user_lib.h": "c", - "chassis.h": "c", - "can_comm.h": "c", - "string.h": "c", - "stdlib.h": "c", - "crc8.h": "c", - "main.h": "c", - "can.h": "c", - "bsp_can.h": "c", - "dji_motor.h": "c", - "master_process.h": "c", - "seasky_protocol.h": "c", - "bsp_usart.h": "c", - "message_center.h": "c", - "stddef.h": "c", - "stm32_hal_legacy.h": "c", - "message_buffer.h": "c", - "robot_def.h": "c", - "remote_control.h": "c", - "robot_cmd.h": "c", - "chassis_cmd.h": "c", - "referee.h": "c", - "arm_math.h": "c", - "bsp_dwt.h": "c", - "compare": "c", - "*.tcc": "c", - "type_traits": "c", - "typeinfo": "c", - "general_def.h": "c", - "super_cap.h": "c", - "motor_def.h": "c", - "quaternionekf.h": "c", - "shoot.h": "c", - "lk9025.h": "c", - "ht04.h": "c", - "rtc.h": "c", - "tim.h": "c", - "usb_device.h": "c", - "gpio.h": "c", - "rng.h": "c", - "cmsis_os.h": "c" - }, - "C_Cpp.default.configurationProvider": "ms-vscode.makefile-tools", - "C_Cpp.intelliSenseEngineFallback": "enabled", -} \ No newline at end of file diff --git a/HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h b/HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h new file mode 100644 index 0000000..9a7a67e --- /dev/null +++ b/HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h @@ -0,0 +1,741 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_i2c.h + * @author MCD Application Team + * @brief Header file of I2C HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_I2C_H +#define __STM32F4xx_HAL_I2C_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2C + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup I2C_Exported_Types I2C Exported Types + * @{ + */ + +/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition + * @brief I2C Configuration Structure definition + * @{ + */ +typedef struct +{ + uint32_t ClockSpeed; /*!< Specifies the clock frequency. + This parameter must be set to a value lower than 400kHz */ + + uint32_t DutyCycle; /*!< Specifies the I2C fast mode duty cycle. + This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */ + + uint32_t OwnAddress1; /*!< Specifies the first device own address. + This parameter can be a 7-bit or 10-bit address. */ + + uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected. + This parameter can be a value of @ref I2C_addressing_mode */ + + uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. + This parameter can be a value of @ref I2C_dual_addressing_mode */ + + uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected + This parameter can be a 7-bit address. */ + + uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. + This parameter can be a value of @ref I2C_general_call_addressing_mode */ + + uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. + This parameter can be a value of @ref I2C_nostretch_mode */ + +} I2C_InitTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_state_structure_definition HAL state structure definition + * @brief HAL State structure definition + * @note HAL I2C State value coding follow below described bitmap : + * b7-b6 Error information + * 00 : No Error + * 01 : Abort (Abort user request on going) + * 10 : Timeout + * 11 : Error + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized and ready to use. HAL I2C Init function called) + * b4 (not used) + * x : Should be set to 0 + * b3 + * 0 : Ready or Busy (No Listen mode ongoing) + * 1 : Listen (Peripheral in Address Listen Mode) + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (Peripheral busy with some configuration or internal operations) + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * @{ + */ +typedef enum +{ + HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */ + HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */ + HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */ + HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */ + HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */ + HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */ + HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission + process is ongoing */ + HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception + process is ongoing */ + HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */ + HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */ + HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */ + +} HAL_I2C_StateTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_mode_structure_definition HAL mode structure definition + * @brief HAL Mode structure definition + * @note HAL I2C Mode value coding follow below described bitmap :\n + * b7 (not used)\n + * x : Should be set to 0\n + * b6\n + * 0 : None\n + * 1 : Memory (HAL I2C communication is in Memory Mode)\n + * b5\n + * 0 : None\n + * 1 : Slave (HAL I2C communication is in Slave Mode)\n + * b4\n + * 0 : None\n + * 1 : Master (HAL I2C communication is in Master Mode)\n + * b3-b2-b1-b0 (not used)\n + * xxxx : Should be set to 0000 + * @{ + */ +typedef enum +{ + HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */ + HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */ + HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */ + HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */ + +} HAL_I2C_ModeTypeDef; + +/** + * @} + */ + +/** @defgroup I2C_Error_Code_definition I2C Error Code definition + * @brief I2C Error Code definition + * @{ + */ +#define HAL_I2C_ERROR_NONE 0x00000000U /*!< No error */ +#define HAL_I2C_ERROR_BERR 0x00000001U /*!< BERR error */ +#define HAL_I2C_ERROR_ARLO 0x00000002U /*!< ARLO error */ +#define HAL_I2C_ERROR_AF 0x00000004U /*!< AF error */ +#define HAL_I2C_ERROR_OVR 0x00000008U /*!< OVR error */ +#define HAL_I2C_ERROR_DMA 0x00000010U /*!< DMA transfer error */ +#define HAL_I2C_ERROR_TIMEOUT 0x00000020U /*!< Timeout Error */ +#define HAL_I2C_ERROR_SIZE 0x00000040U /*!< Size Management error */ +#define HAL_I2C_ERROR_DMA_PARAM 0x00000080U /*!< DMA Parameter Error */ +#define HAL_I2C_WRONG_START 0x00000200U /*!< Wrong start Error */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +#define HAL_I2C_ERROR_INVALID_CALLBACK 0x00000100U /*!< Invalid Callback error */ +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition + * @brief I2C handle Structure definition + * @{ + */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +typedef struct __I2C_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +{ + I2C_TypeDef *Instance; /*!< I2C registers base address */ + + I2C_InitTypeDef Init; /*!< I2C communication parameters */ + + uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */ + + uint16_t XferSize; /*!< I2C transfer size */ + + __IO uint16_t XferCount; /*!< I2C transfer counter */ + + __IO uint32_t XferOptions; /*!< I2C transfer options */ + + __IO uint32_t PreviousState; /*!< I2C communication Previous state and mode + context for internal usage */ + + DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */ + + HAL_LockTypeDef Lock; /*!< I2C locking object */ + + __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */ + + __IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */ + + __IO uint32_t ErrorCode; /*!< I2C Error code */ + + __IO uint32_t Devaddress; /*!< I2C Target device address */ + + __IO uint32_t Memaddress; /*!< I2C Target memory address */ + + __IO uint32_t MemaddSize; /*!< I2C Target memory address size */ + + __IO uint32_t EventCount; /*!< I2C Event counter */ + + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Tx Transfer completed callback */ + void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Rx Transfer completed callback */ + void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Tx Transfer completed callback */ + void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Rx Transfer completed callback */ + void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Listen Complete callback */ + void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Tx Transfer completed callback */ + void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Rx Transfer completed callback */ + void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Error callback */ + void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Abort callback */ + + void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< I2C Slave Address Match callback */ + + void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp Init callback */ + void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp DeInit callback */ + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +} I2C_HandleTypeDef; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +/** + * @brief HAL I2C Callback ID enumeration definition + */ +typedef enum +{ + HAL_I2C_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< I2C Master Tx Transfer completed callback ID */ + HAL_I2C_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< I2C Master Rx Transfer completed callback ID */ + HAL_I2C_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< I2C Slave Tx Transfer completed callback ID */ + HAL_I2C_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< I2C Slave Rx Transfer completed callback ID */ + HAL_I2C_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< I2C Listen Complete callback ID */ + HAL_I2C_MEM_TX_COMPLETE_CB_ID = 0x05U, /*!< I2C Memory Tx Transfer callback ID */ + HAL_I2C_MEM_RX_COMPLETE_CB_ID = 0x06U, /*!< I2C Memory Rx Transfer completed callback ID */ + HAL_I2C_ERROR_CB_ID = 0x07U, /*!< I2C Error callback ID */ + HAL_I2C_ABORT_CB_ID = 0x08U, /*!< I2C Abort callback ID */ + + HAL_I2C_MSPINIT_CB_ID = 0x09U, /*!< I2C Msp Init callback ID */ + HAL_I2C_MSPDEINIT_CB_ID = 0x0AU /*!< I2C Msp DeInit callback ID */ + +} HAL_I2C_CallbackIDTypeDef; + +/** + * @brief HAL I2C Callback pointer definition + */ +typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); /*!< pointer to an I2C callback function */ +typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an I2C Address Match callback function */ + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** + * @} + */ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Constants I2C Exported Constants + * @{ + */ + +/** @defgroup I2C_duty_cycle_in_fast_mode I2C duty cycle in fast mode + * @{ + */ +#define I2C_DUTYCYCLE_2 0x00000000U +#define I2C_DUTYCYCLE_16_9 I2C_CCR_DUTY +/** + * @} + */ + +/** @defgroup I2C_addressing_mode I2C addressing mode + * @{ + */ +#define I2C_ADDRESSINGMODE_7BIT 0x00004000U +#define I2C_ADDRESSINGMODE_10BIT (I2C_OAR1_ADDMODE | 0x00004000U) +/** + * @} + */ + +/** @defgroup I2C_dual_addressing_mode I2C dual addressing mode + * @{ + */ +#define I2C_DUALADDRESS_DISABLE 0x00000000U +#define I2C_DUALADDRESS_ENABLE I2C_OAR2_ENDUAL +/** + * @} + */ + +/** @defgroup I2C_general_call_addressing_mode I2C general call addressing mode + * @{ + */ +#define I2C_GENERALCALL_DISABLE 0x00000000U +#define I2C_GENERALCALL_ENABLE I2C_CR1_ENGC +/** + * @} + */ + +/** @defgroup I2C_nostretch_mode I2C nostretch mode + * @{ + */ +#define I2C_NOSTRETCH_DISABLE 0x00000000U +#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH +/** + * @} + */ + +/** @defgroup I2C_Memory_Address_Size I2C Memory Address Size + * @{ + */ +#define I2C_MEMADD_SIZE_8BIT 0x00000001U +#define I2C_MEMADD_SIZE_16BIT 0x00000010U +/** + * @} + */ + +/** @defgroup I2C_XferDirection_definition I2C XferDirection definition + * @{ + */ +#define I2C_DIRECTION_RECEIVE 0x00000000U +#define I2C_DIRECTION_TRANSMIT 0x00000001U +/** + * @} + */ + +/** @defgroup I2C_XferOptions_definition I2C XferOptions definition + * @{ + */ +#define I2C_FIRST_FRAME 0x00000001U +#define I2C_FIRST_AND_NEXT_FRAME 0x00000002U +#define I2C_NEXT_FRAME 0x00000004U +#define I2C_FIRST_AND_LAST_FRAME 0x00000008U +#define I2C_LAST_FRAME_NO_STOP 0x00000010U +#define I2C_LAST_FRAME 0x00000020U + +/* List of XferOptions in usage of : + * 1- Restart condition in all use cases (direction change or not) + */ +#define I2C_OTHER_FRAME (0x00AA0000U) +#define I2C_OTHER_AND_LAST_FRAME (0xAA000000U) +/** + * @} + */ + +/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition + * @brief I2C Interrupt definition + * Elements values convention: 0xXXXXXXXX + * - XXXXXXXX : Interrupt control mask + * @{ + */ +#define I2C_IT_BUF I2C_CR2_ITBUFEN +#define I2C_IT_EVT I2C_CR2_ITEVTEN +#define I2C_IT_ERR I2C_CR2_ITERREN +/** + * @} + */ + +/** @defgroup I2C_Flag_definition I2C Flag definition + * @{ + */ + +#define I2C_FLAG_OVR 0x00010800U +#define I2C_FLAG_AF 0x00010400U +#define I2C_FLAG_ARLO 0x00010200U +#define I2C_FLAG_BERR 0x00010100U +#define I2C_FLAG_TXE 0x00010080U +#define I2C_FLAG_RXNE 0x00010040U +#define I2C_FLAG_STOPF 0x00010010U +#define I2C_FLAG_ADD10 0x00010008U +#define I2C_FLAG_BTF 0x00010004U +#define I2C_FLAG_ADDR 0x00010002U +#define I2C_FLAG_SB 0x00010001U +#define I2C_FLAG_DUALF 0x00100080U +#define I2C_FLAG_GENCALL 0x00100010U +#define I2C_FLAG_TRA 0x00100004U +#define I2C_FLAG_BUSY 0x00100002U +#define I2C_FLAG_MSL 0x00100001U +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Macros I2C Exported Macros + * @{ + */ + +/** @brief Reset I2C handle state. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_I2C_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET) +#endif + +/** @brief Enable or disable the specified I2C interrupts. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable or disable. + * This parameter can be one of the following values: + * @arg I2C_IT_BUF: Buffer interrupt enable + * @arg I2C_IT_EVT: Event interrupt enable + * @arg I2C_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__)) +#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__)) + +/** @brief Checks if the specified I2C interrupt source is enabled or disabled. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the I2C interrupt source to check. + * This parameter can be one of the following values: + * @arg I2C_IT_BUF: Buffer interrupt enable + * @arg I2C_IT_EVT: Event interrupt enable + * @arg I2C_IT_ERR: Error interrupt enable + * @retval The new state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Checks whether the specified I2C flag is set or not. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg I2C_FLAG_OVR: Overrun/Underrun flag + * @arg I2C_FLAG_AF: Acknowledge failure flag + * @arg I2C_FLAG_ARLO: Arbitration lost flag + * @arg I2C_FLAG_BERR: Bus error flag + * @arg I2C_FLAG_TXE: Data register empty flag + * @arg I2C_FLAG_RXNE: Data register not empty flag + * @arg I2C_FLAG_STOPF: Stop detection flag + * @arg I2C_FLAG_ADD10: 10-bit header sent flag + * @arg I2C_FLAG_BTF: Byte transfer finished flag + * @arg I2C_FLAG_ADDR: Address sent flag + * Address matched flag + * @arg I2C_FLAG_SB: Start bit flag + * @arg I2C_FLAG_DUALF: Dual flag + * @arg I2C_FLAG_GENCALL: General call header flag + * @arg I2C_FLAG_TRA: Transmitter/Receiver flag + * @arg I2C_FLAG_BUSY: Bus busy flag + * @arg I2C_FLAG_MSL: Master/Slave flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 16U)) == 0x01U) ? \ + (((((__HANDLE__)->Instance->SR1) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET) : \ + (((((__HANDLE__)->Instance->SR2) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET)) + +/** @brief Clears the I2C pending flags which are cleared by writing 0 in a specific bit. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode) + * @arg I2C_FLAG_AF: Acknowledge failure flag + * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode) + * @arg I2C_FLAG_BERR: Bus error flag + * @retval None + */ +#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR1 = ~((__FLAG__) & I2C_FLAG_MASK)) + +/** @brief Clears the I2C ADDR pending flag. + * @param __HANDLE__ specifies the I2C Handle. + * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral. + * @retval None + */ +#define __HAL_I2C_CLEAR_ADDRFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg = 0x00U; \ + tmpreg = (__HANDLE__)->Instance->SR1; \ + tmpreg = (__HANDLE__)->Instance->SR2; \ + UNUSED(tmpreg); \ + } while(0) + +/** @brief Clears the I2C STOPF pending flag. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_CLEAR_STOPFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg = 0x00U; \ + tmpreg = (__HANDLE__)->Instance->SR1; \ + SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE); \ + UNUSED(tmpreg); \ + } while(0) + +/** @brief Enable the specified I2C peripheral. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE) + +/** @brief Disable the specified I2C peripheral. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE) + +/** + * @} + */ + +/* Include I2C HAL Extension module */ +#include "stm32f4xx_hal_i2c_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2C_Exported_Functions + * @{ + */ + +/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +/* Initialization and de-initialization functions******************************/ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, pI2C_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +/* IO operation functions ****************************************************/ +/******* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout); + +/******* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress); + +/******* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions); +/** + * @} + */ + +/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ +/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); +void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions + * @{ + */ +/* Peripheral State, Mode and Error functions *********************************/ +HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c); +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c); +uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c); + +/** + * @} + */ + +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Constants I2C Private Constants + * @{ + */ +#define I2C_FLAG_MASK 0x0000FFFFU +#define I2C_MIN_PCLK_FREQ_STANDARD 2000000U /*!< 2 MHz */ +#define I2C_MIN_PCLK_FREQ_FAST 4000000U /*!< 4 MHz */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2C_Private_Macros I2C Private Macros + * @{ + */ + +#define I2C_MIN_PCLK_FREQ(__PCLK__, __SPEED__) (((__SPEED__) <= 100000U) ? ((__PCLK__) < I2C_MIN_PCLK_FREQ_STANDARD) : ((__PCLK__) < I2C_MIN_PCLK_FREQ_FAST)) +#define I2C_CCR_CALCULATION(__PCLK__, __SPEED__, __COEFF__) (((((__PCLK__) - 1U)/((__SPEED__) * (__COEFF__))) + 1U) & I2C_CCR_CCR) +#define I2C_FREQRANGE(__PCLK__) ((__PCLK__)/1000000U) +#define I2C_RISE_TIME(__FREQRANGE__, __SPEED__) (((__SPEED__) <= 100000U) ? ((__FREQRANGE__) + 1U) : ((((__FREQRANGE__) * 300U) / 1000U) + 1U)) +#define I2C_SPEED_STANDARD(__PCLK__, __SPEED__) ((I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 2U) < 4U)? 4U:I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 2U)) +#define I2C_SPEED_FAST(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__DUTYCYCLE__) == I2C_DUTYCYCLE_2)? I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 3U) : (I2C_CCR_CALCULATION((__PCLK__), (__SPEED__), 25U) | I2C_DUTYCYCLE_16_9)) +#define I2C_SPEED(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__SPEED__) <= 100000U)? (I2C_SPEED_STANDARD((__PCLK__), (__SPEED__))) : \ + ((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__)) & I2C_CCR_CCR) == 0U)? 1U : \ + ((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__))) | I2C_CCR_FS)) + +#define I2C_7BIT_ADD_WRITE(__ADDRESS__) ((uint8_t)((__ADDRESS__) & (uint8_t)(~I2C_OAR1_ADD0))) +#define I2C_7BIT_ADD_READ(__ADDRESS__) ((uint8_t)((__ADDRESS__) | I2C_OAR1_ADD0)) + +#define I2C_10BIT_ADDRESS(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)0x00FF))) +#define I2C_10BIT_HEADER_WRITE(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)0x0300)) >> 7) | (uint16_t)0x00F0))) +#define I2C_10BIT_HEADER_READ(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)0x0300)) >> 7) | (uint16_t)(0x00F1)))) + +#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)0xFF00)) >> 8))) +#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)0x00FF))) + +/** @defgroup I2C_IS_RTC_Definitions I2C Private macros to check input parameters + * @{ + */ +#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DUTYCYCLE_2) || \ + ((CYCLE) == I2C_DUTYCYCLE_16_9)) +#define IS_I2C_ADDRESSING_MODE(ADDRESS) (((ADDRESS) == I2C_ADDRESSINGMODE_7BIT) || \ + ((ADDRESS) == I2C_ADDRESSINGMODE_10BIT)) +#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \ + ((ADDRESS) == I2C_DUALADDRESS_ENABLE)) +#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \ + ((CALL) == I2C_GENERALCALL_ENABLE)) +#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \ + ((STRETCH) == I2C_NOSTRETCH_ENABLE)) +#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \ + ((SIZE) == I2C_MEMADD_SIZE_16BIT)) +#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) > 0U) && ((SPEED) <= 400000U)) +#define IS_I2C_OWN_ADDRESS1(ADDRESS1) (((ADDRESS1) & 0xFFFFFC00U) == 0U) +#define IS_I2C_OWN_ADDRESS2(ADDRESS2) (((ADDRESS2) & 0xFFFFFF01U) == 0U) +#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \ + ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \ + ((REQUEST) == I2C_NEXT_FRAME) || \ + ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \ + ((REQUEST) == I2C_LAST_FRAME) || \ + ((REQUEST) == I2C_LAST_FRAME_NO_STOP) || \ + IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST)) + +#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME) || \ + ((REQUEST) == I2C_OTHER_AND_LAST_FRAME)) + +#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET) +#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET) +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32F4xx_HAL_I2C_H */ + diff --git a/HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c_ex.h b/HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c_ex.h new file mode 100644 index 0000000..31ad99c --- /dev/null +++ b/HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c_ex.h @@ -0,0 +1,115 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_i2c_ex.h + * @author MCD Application Team + * @brief Header file of I2C HAL Extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_I2C_EX_H +#define __STM32F4xx_HAL_I2C_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(I2C_FLTR_ANOFF)&&defined(I2C_FLTR_DNF) +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2CEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2CEx_Exported_Constants I2C Exported Constants + * @{ + */ + +/** @defgroup I2CEx_Analog_Filter I2C Analog Filter + * @{ + */ +#define I2C_ANALOGFILTER_ENABLE 0x00000000U +#define I2C_ANALOGFILTER_DISABLE I2C_FLTR_ANOFF +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2CEx_Exported_Functions + * @{ + */ + +/** @addtogroup I2CEx_Exported_Functions_Group1 + * @{ + */ +/* Peripheral Control functions ************************************************/ +HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter); +HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter); +/** + * @} + */ + +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Constants I2C Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Macros I2C Private Macros + * @{ + */ +#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \ + ((FILTER) == I2C_ANALOGFILTER_DISABLE)) +#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_I2C_EX_H */ + + diff --git a/HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_i2c.h b/HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_i2c.h new file mode 100644 index 0000000..babba6b --- /dev/null +++ b/HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_i2c.h @@ -0,0 +1,1890 @@ +/** + ****************************************************************************** + * @file stm32f4xx_ll_i2c.h + * @author MCD Application Team + * @brief Header file of I2C LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_LL_I2C_H +#define __STM32F4xx_LL_I2C_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_LL_Driver + * @{ + */ + +#if defined (I2C1) || defined (I2C2) || defined (I2C3) + +/** @defgroup I2C_LL I2C + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2C_LL_Private_Constants I2C Private Constants + * @{ + */ + +/* Defines used to perform compute and check in the macros */ +#define LL_I2C_MAX_SPEED_STANDARD 100000U +#define LL_I2C_MAX_SPEED_FAST 400000U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2C_LL_Private_Macros I2C Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2C_LL_ES_INIT I2C Exported Init structure + * @{ + */ +typedef struct +{ + uint32_t PeripheralMode; /*!< Specifies the peripheral mode. + This parameter can be a value of @ref I2C_LL_EC_PERIPHERAL_MODE + + This feature can be modified afterwards using unitary function @ref LL_I2C_SetMode(). */ + + uint32_t ClockSpeed; /*!< Specifies the clock frequency. + This parameter must be set to a value lower than 400kHz (in Hz) + + This feature can be modified afterwards using unitary function @ref LL_I2C_SetClockPeriod() + or @ref LL_I2C_SetDutyCycle() or @ref LL_I2C_SetClockSpeedMode() or @ref LL_I2C_ConfigSpeed(). */ + + uint32_t DutyCycle; /*!< Specifies the I2C fast mode duty cycle. + This parameter can be a value of @ref I2C_LL_EC_DUTYCYCLE + + This feature can be modified afterwards using unitary function @ref LL_I2C_SetDutyCycle(). */ + +#if defined(I2C_FLTR_ANOFF)&&defined(I2C_FLTR_DNF) + uint32_t AnalogFilter; /*!< Enables or disables analog noise filter. + This parameter can be a value of @ref I2C_LL_EC_ANALOGFILTER_SELECTION + + This feature can be modified afterwards using unitary functions @ref LL_I2C_EnableAnalogFilter() or LL_I2C_DisableAnalogFilter(). */ + + uint32_t DigitalFilter; /*!< Configures the digital noise filter. + This parameter can be a number between Min_Data = 0x00 and Max_Data = 0x0F + + This feature can be modified afterwards using unitary function @ref LL_I2C_SetDigitalFilter(). */ + +#endif + uint32_t OwnAddress1; /*!< Specifies the device own address 1. + This parameter must be a value between Min_Data = 0x00 and Max_Data = 0x3FF + + This feature can be modified afterwards using unitary function @ref LL_I2C_SetOwnAddress1(). */ + + uint32_t TypeAcknowledge; /*!< Specifies the ACKnowledge or Non ACKnowledge condition after the address receive match code or next received byte. + This parameter can be a value of @ref I2C_LL_EC_I2C_ACKNOWLEDGE + + This feature can be modified afterwards using unitary function @ref LL_I2C_AcknowledgeNextData(). */ + + uint32_t OwnAddrSize; /*!< Specifies the device own address 1 size (7-bit or 10-bit). + This parameter can be a value of @ref I2C_LL_EC_OWNADDRESS1 + + This feature can be modified afterwards using unitary function @ref LL_I2C_SetOwnAddress1(). */ +} LL_I2C_InitTypeDef; +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2C_LL_Exported_Constants I2C Exported Constants + * @{ + */ + +/** @defgroup I2C_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_I2C_ReadReg function + * @{ + */ +#define LL_I2C_SR1_SB I2C_SR1_SB /*!< Start Bit (master mode) */ +#define LL_I2C_SR1_ADDR I2C_SR1_ADDR /*!< Address sent (master mode) or + Address matched flag (slave mode) */ +#define LL_I2C_SR1_BTF I2C_SR1_BTF /*!< Byte Transfer Finished flag */ +#define LL_I2C_SR1_ADD10 I2C_SR1_ADD10 /*!< 10-bit header sent (master mode) */ +#define LL_I2C_SR1_STOPF I2C_SR1_STOPF /*!< Stop detection flag (slave mode) */ +#define LL_I2C_SR1_RXNE I2C_SR1_RXNE /*!< Data register not empty (receivers) */ +#define LL_I2C_SR1_TXE I2C_SR1_TXE /*!< Data register empty (transmitters) */ +#define LL_I2C_SR1_BERR I2C_SR1_BERR /*!< Bus error */ +#define LL_I2C_SR1_ARLO I2C_SR1_ARLO /*!< Arbitration lost */ +#define LL_I2C_SR1_AF I2C_SR1_AF /*!< Acknowledge failure flag */ +#define LL_I2C_SR1_OVR I2C_SR1_OVR /*!< Overrun/Underrun */ +#define LL_I2C_SR1_PECERR I2C_ISR_PECERR /*!< PEC Error in reception (SMBus mode) */ +#define LL_I2C_SR1_TIMEOUT I2C_ISR_TIMEOUT /*!< Timeout detection flag (SMBus mode) */ +#define LL_I2C_SR1_SMALERT I2C_ISR_SMALERT /*!< SMBus alert (SMBus mode) */ +#define LL_I2C_SR2_MSL I2C_SR2_MSL /*!< Master/Slave flag */ +#define LL_I2C_SR2_BUSY I2C_SR2_BUSY /*!< Bus busy flag */ +#define LL_I2C_SR2_TRA I2C_SR2_TRA /*!< Transmitter/receiver direction */ +#define LL_I2C_SR2_GENCALL I2C_SR2_GENCALL /*!< General call address (Slave mode) */ +#define LL_I2C_SR2_SMBDEFAULT I2C_SR2_SMBDEFAULT /*!< SMBus Device default address (Slave mode) */ +#define LL_I2C_SR2_SMBHOST I2C_SR2_SMBHOST /*!< SMBus Host address (Slave mode) */ +#define LL_I2C_SR2_DUALF I2C_SR2_DUALF /*!< Dual flag (Slave mode) */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_I2C_ReadReg and LL_I2C_WriteReg functions + * @{ + */ +#define LL_I2C_CR2_ITEVTEN I2C_CR2_ITEVTEN /*!< Events interrupts enable */ +#define LL_I2C_CR2_ITBUFEN I2C_CR2_ITBUFEN /*!< Buffer interrupts enable */ +#define LL_I2C_CR2_ITERREN I2C_CR2_ITERREN /*!< Error interrupts enable */ +/** + * @} + */ + +#if defined(I2C_FLTR_ANOFF) +/** @defgroup I2C_LL_EC_ANALOGFILTER_SELECTION Analog Filter Selection + * @{ + */ +#define LL_I2C_ANALOGFILTER_ENABLE 0x00000000U /*!< Analog filter is enabled. */ +#define LL_I2C_ANALOGFILTER_DISABLE I2C_FLTR_ANOFF /*!< Analog filter is disabled.*/ +/** + * @} + */ + +#endif +/** @defgroup I2C_LL_EC_OWNADDRESS1 Own Address 1 Length + * @{ + */ +#define LL_I2C_OWNADDRESS1_7BIT 0x00004000U /*!< Own address 1 is a 7-bit address. */ +#define LL_I2C_OWNADDRESS1_10BIT (uint32_t)(I2C_OAR1_ADDMODE | 0x00004000U) /*!< Own address 1 is a 10-bit address. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_DUTYCYCLE Fast Mode Duty Cycle + * @{ + */ +#define LL_I2C_DUTYCYCLE_2 0x00000000U /*!< I2C fast mode Tlow/Thigh = 2 */ +#define LL_I2C_DUTYCYCLE_16_9 I2C_CCR_DUTY /*!< I2C fast mode Tlow/Thigh = 16/9 */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_CLOCK_SPEED_MODE Master Clock Speed Mode + * @{ + */ +#define LL_I2C_CLOCK_SPEED_STANDARD_MODE 0x00000000U /*!< Master clock speed range is standard mode */ +#define LL_I2C_CLOCK_SPEED_FAST_MODE I2C_CCR_FS /*!< Master clock speed range is fast mode */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_PERIPHERAL_MODE Peripheral Mode + * @{ + */ +#define LL_I2C_MODE_I2C 0x00000000U /*!< I2C Master or Slave mode */ +#define LL_I2C_MODE_SMBUS_HOST (uint32_t)(I2C_CR1_SMBUS | I2C_CR1_SMBTYPE | I2C_CR1_ENARP) /*!< SMBus Host address acknowledge */ +#define LL_I2C_MODE_SMBUS_DEVICE I2C_CR1_SMBUS /*!< SMBus Device default mode (Default address not acknowledge) */ +#define LL_I2C_MODE_SMBUS_DEVICE_ARP (uint32_t)(I2C_CR1_SMBUS | I2C_CR1_ENARP) /*!< SMBus Device Default address acknowledge */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_I2C_ACKNOWLEDGE Acknowledge Generation + * @{ + */ +#define LL_I2C_ACK I2C_CR1_ACK /*!< ACK is sent after current received byte. */ +#define LL_I2C_NACK 0x00000000U /*!< NACK is sent after current received byte.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_DIRECTION Read Write Direction + * @{ + */ +#define LL_I2C_DIRECTION_WRITE I2C_SR2_TRA /*!< Bus is in write transfer */ +#define LL_I2C_DIRECTION_READ 0x00000000U /*!< Bus is in read transfer */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup I2C_LL_Exported_Macros I2C Exported Macros + * @{ + */ + +/** @defgroup I2C_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in I2C register + * @param __INSTANCE__ I2C Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_I2C_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in I2C register + * @param __INSTANCE__ I2C Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_I2C_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup I2C_LL_EM_Exported_Macros_Helper Exported_Macros_Helper + * @{ + */ + +/** + * @brief Convert Peripheral Clock Frequency in Mhz. + * @param __PCLK__ This parameter must be a value of peripheral clock (in Hz). + * @retval Value of peripheral clock (in Mhz) + */ +#define __LL_I2C_FREQ_HZ_TO_MHZ(__PCLK__) (uint32_t)((__PCLK__)/1000000U) + +/** + * @brief Convert Peripheral Clock Frequency in Hz. + * @param __PCLK__ This parameter must be a value of peripheral clock (in Mhz). + * @retval Value of peripheral clock (in Hz) + */ +#define __LL_I2C_FREQ_MHZ_TO_HZ(__PCLK__) (uint32_t)((__PCLK__)*1000000U) + +/** + * @brief Compute I2C Clock rising time. + * @param __FREQRANGE__ This parameter must be a value of peripheral clock (in Mhz). + * @param __SPEED__ This parameter must be a value lower than 400kHz (in Hz). + * @retval Value between Min_Data=0x02 and Max_Data=0x3F + */ +#define __LL_I2C_RISE_TIME(__FREQRANGE__, __SPEED__) (uint32_t)(((__SPEED__) <= LL_I2C_MAX_SPEED_STANDARD) ? ((__FREQRANGE__) + 1U) : ((((__FREQRANGE__) * 300U) / 1000U) + 1U)) + +/** + * @brief Compute Speed clock range to a Clock Control Register (I2C_CCR_CCR) value. + * @param __PCLK__ This parameter must be a value of peripheral clock (in Hz). + * @param __SPEED__ This parameter must be a value lower than 400kHz (in Hz). + * @param __DUTYCYCLE__ This parameter can be one of the following values: + * @arg @ref LL_I2C_DUTYCYCLE_2 + * @arg @ref LL_I2C_DUTYCYCLE_16_9 + * @retval Value between Min_Data=0x004 and Max_Data=0xFFF, except in FAST DUTY mode where Min_Data=0x001. + */ +#define __LL_I2C_SPEED_TO_CCR(__PCLK__, __SPEED__, __DUTYCYCLE__) (uint32_t)(((__SPEED__) <= LL_I2C_MAX_SPEED_STANDARD)? \ + (__LL_I2C_SPEED_STANDARD_TO_CCR((__PCLK__), (__SPEED__))) : \ + (__LL_I2C_SPEED_FAST_TO_CCR((__PCLK__), (__SPEED__), (__DUTYCYCLE__)))) + +/** + * @brief Compute Speed Standard clock range to a Clock Control Register (I2C_CCR_CCR) value. + * @param __PCLK__ This parameter must be a value of peripheral clock (in Hz). + * @param __SPEED__ This parameter must be a value lower than 100kHz (in Hz). + * @retval Value between Min_Data=0x004 and Max_Data=0xFFF. + */ +#define __LL_I2C_SPEED_STANDARD_TO_CCR(__PCLK__, __SPEED__) (uint32_t)(((((__PCLK__)/((__SPEED__) << 1U)) & I2C_CCR_CCR) < 4U)? 4U:((__PCLK__) / ((__SPEED__) << 1U))) + +/** + * @brief Compute Speed Fast clock range to a Clock Control Register (I2C_CCR_CCR) value. + * @param __PCLK__ This parameter must be a value of peripheral clock (in Hz). + * @param __SPEED__ This parameter must be a value between Min_Data=100Khz and Max_Data=400Khz (in Hz). + * @param __DUTYCYCLE__ This parameter can be one of the following values: + * @arg @ref LL_I2C_DUTYCYCLE_2 + * @arg @ref LL_I2C_DUTYCYCLE_16_9 + * @retval Value between Min_Data=0x001 and Max_Data=0xFFF + */ +#define __LL_I2C_SPEED_FAST_TO_CCR(__PCLK__, __SPEED__, __DUTYCYCLE__) (uint32_t)(((__DUTYCYCLE__) == LL_I2C_DUTYCYCLE_2)? \ + (((((__PCLK__) / ((__SPEED__) * 3U)) & I2C_CCR_CCR) == 0U)? 1U:((__PCLK__) / ((__SPEED__) * 3U))) : \ + (((((__PCLK__) / ((__SPEED__) * 25U)) & I2C_CCR_CCR) == 0U)? 1U:((__PCLK__) / ((__SPEED__) * 25U)))) + +/** + * @brief Get the Least significant bits of a 10-Bits address. + * @param __ADDRESS__ This parameter must be a value of a 10-Bits slave address. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +#define __LL_I2C_10BIT_ADDRESS(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FF)))) + +/** + * @brief Convert a 10-Bits address to a 10-Bits header with Write direction. + * @param __ADDRESS__ This parameter must be a value of a 10-Bits slave address. + * @retval Value between Min_Data=0xF0 and Max_Data=0xF6 + */ +#define __LL_I2C_10BIT_HEADER_WRITE(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300))) >> 7) | (uint16_t)(0xF0)))) + +/** + * @brief Convert a 10-Bits address to a 10-Bits header with Read direction. + * @param __ADDRESS__ This parameter must be a value of a 10-Bits slave address. + * @retval Value between Min_Data=0xF1 and Max_Data=0xF7 + */ +#define __LL_I2C_10BIT_HEADER_READ(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300))) >> 7) | (uint16_t)(0xF1)))) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup I2C_LL_Exported_Functions I2C Exported Functions + * @{ + */ + +/** @defgroup I2C_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable I2C peripheral (PE = 1). + * @rmtoll CR1 PE LL_I2C_Enable + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_Enable(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_PE); +} + +/** + * @brief Disable I2C peripheral (PE = 0). + * @rmtoll CR1 PE LL_I2C_Disable + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_Disable(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_PE); +} + +/** + * @brief Check if the I2C peripheral is enabled or disabled. + * @rmtoll CR1 PE LL_I2C_IsEnabled + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabled(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR1, I2C_CR1_PE) == (I2C_CR1_PE)); +} + +#if defined(I2C_FLTR_ANOFF)&&defined(I2C_FLTR_DNF) +/** + * @brief Configure Noise Filters (Analog and Digital). + * @note If the analog filter is also enabled, the digital filter is added to analog filter. + * The filters can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll FLTR ANOFF LL_I2C_ConfigFilters\n + * FLTR DNF LL_I2C_ConfigFilters + * @param I2Cx I2C Instance. + * @param AnalogFilter This parameter can be one of the following values: + * @arg @ref LL_I2C_ANALOGFILTER_ENABLE + * @arg @ref LL_I2C_ANALOGFILTER_DISABLE + * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*TPCLK1) + * This parameter is used to configure the digital noise filter on SDA and SCL input. The digital filter will suppress the spikes with a length of up to DNF[3:0]*TPCLK1. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ConfigFilters(I2C_TypeDef *I2Cx, uint32_t AnalogFilter, uint32_t DigitalFilter) +{ + MODIFY_REG(I2Cx->FLTR, I2C_FLTR_ANOFF | I2C_FLTR_DNF, AnalogFilter | DigitalFilter); +} +#endif +#if defined(I2C_FLTR_DNF) + +/** + * @brief Configure Digital Noise Filter. + * @note If the analog filter is also enabled, the digital filter is added to analog filter. + * This filter can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll FLTR DNF LL_I2C_SetDigitalFilter + * @param I2Cx I2C Instance. + * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*TPCLK1) + * This parameter is used to configure the digital noise filter on SDA and SCL input. The digital filter will suppress the spikes with a length of up to DNF[3:0]*TPCLK1. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetDigitalFilter(I2C_TypeDef *I2Cx, uint32_t DigitalFilter) +{ + MODIFY_REG(I2Cx->FLTR, I2C_FLTR_DNF, DigitalFilter); +} + +/** + * @brief Get the current Digital Noise Filter configuration. + * @rmtoll FLTR DNF LL_I2C_GetDigitalFilter + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetDigitalFilter(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->FLTR, I2C_FLTR_DNF)); +} +#endif +#if defined(I2C_FLTR_ANOFF) + +/** + * @brief Enable Analog Noise Filter. + * @note This filter can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll FLTR ANOFF LL_I2C_EnableAnalogFilter + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableAnalogFilter(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->FLTR, I2C_FLTR_ANOFF); +} + +/** + * @brief Disable Analog Noise Filter. + * @note This filter can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll FLTR ANOFF LL_I2C_DisableAnalogFilter + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableAnalogFilter(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->FLTR, I2C_FLTR_ANOFF); +} + +/** + * @brief Check if Analog Noise Filter is enabled or disabled. + * @rmtoll FLTR ANOFF LL_I2C_IsEnabledAnalogFilter + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledAnalogFilter(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->FLTR, I2C_FLTR_ANOFF) == (I2C_FLTR_ANOFF)); +} +#endif + +/** + * @brief Enable DMA transmission requests. + * @rmtoll CR2 DMAEN LL_I2C_EnableDMAReq_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableDMAReq_TX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_DMAEN); +} + +/** + * @brief Disable DMA transmission requests. + * @rmtoll CR2 DMAEN LL_I2C_DisableDMAReq_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableDMAReq_TX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_DMAEN); +} + +/** + * @brief Check if DMA transmission requests are enabled or disabled. + * @rmtoll CR2 DMAEN LL_I2C_IsEnabledDMAReq_TX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledDMAReq_TX(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR2, I2C_CR2_DMAEN) == (I2C_CR2_DMAEN)); +} + +/** + * @brief Enable DMA reception requests. + * @rmtoll CR2 DMAEN LL_I2C_EnableDMAReq_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableDMAReq_RX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_DMAEN); +} + +/** + * @brief Disable DMA reception requests. + * @rmtoll CR2 DMAEN LL_I2C_DisableDMAReq_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableDMAReq_RX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_DMAEN); +} + +/** + * @brief Check if DMA reception requests are enabled or disabled. + * @rmtoll CR2 DMAEN LL_I2C_IsEnabledDMAReq_RX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledDMAReq_RX(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR2, I2C_CR2_DMAEN) == (I2C_CR2_DMAEN)); +} + +/** + * @brief Get the data register address used for DMA transfer. + * @rmtoll DR DR LL_I2C_DMA_GetRegAddr + * @param I2Cx I2C Instance. + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_I2C_DMA_GetRegAddr(I2C_TypeDef *I2Cx) +{ + return (uint32_t) & (I2Cx->DR); +} + +/** + * @brief Enable Clock stretching. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 NOSTRETCH LL_I2C_EnableClockStretching + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableClockStretching(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH); +} + +/** + * @brief Disable Clock stretching. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 NOSTRETCH LL_I2C_DisableClockStretching + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableClockStretching(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH); +} + +/** + * @brief Check if Clock stretching is enabled or disabled. + * @rmtoll CR1 NOSTRETCH LL_I2C_IsEnabledClockStretching + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledClockStretching(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH) != (I2C_CR1_NOSTRETCH)); +} + +/** + * @brief Enable General Call. + * @note When enabled the Address 0x00 is ACKed. + * @rmtoll CR1 ENGC LL_I2C_EnableGeneralCall + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableGeneralCall(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ENGC); +} + +/** + * @brief Disable General Call. + * @note When disabled the Address 0x00 is NACKed. + * @rmtoll CR1 ENGC LL_I2C_DisableGeneralCall + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableGeneralCall(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ENGC); +} + +/** + * @brief Check if General Call is enabled or disabled. + * @rmtoll CR1 ENGC LL_I2C_IsEnabledGeneralCall + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledGeneralCall(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR1, I2C_CR1_ENGC) == (I2C_CR1_ENGC)); +} + +/** + * @brief Set the Own Address1. + * @rmtoll OAR1 ADD0 LL_I2C_SetOwnAddress1\n + * OAR1 ADD1_7 LL_I2C_SetOwnAddress1\n + * OAR1 ADD8_9 LL_I2C_SetOwnAddress1\n + * OAR1 ADDMODE LL_I2C_SetOwnAddress1 + * @param I2Cx I2C Instance. + * @param OwnAddress1 This parameter must be a value between Min_Data=0 and Max_Data=0x3FF. + * @param OwnAddrSize This parameter can be one of the following values: + * @arg @ref LL_I2C_OWNADDRESS1_7BIT + * @arg @ref LL_I2C_OWNADDRESS1_10BIT + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetOwnAddress1(I2C_TypeDef *I2Cx, uint32_t OwnAddress1, uint32_t OwnAddrSize) +{ + MODIFY_REG(I2Cx->OAR1, I2C_OAR1_ADD0 | I2C_OAR1_ADD1_7 | I2C_OAR1_ADD8_9 | I2C_OAR1_ADDMODE, OwnAddress1 | OwnAddrSize); +} + +/** + * @brief Set the 7bits Own Address2. + * @note This action has no effect if own address2 is enabled. + * @rmtoll OAR2 ADD2 LL_I2C_SetOwnAddress2 + * @param I2Cx I2C Instance. + * @param OwnAddress2 This parameter must be a value between Min_Data=0 and Max_Data=0x7F. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetOwnAddress2(I2C_TypeDef *I2Cx, uint32_t OwnAddress2) +{ + MODIFY_REG(I2Cx->OAR2, I2C_OAR2_ADD2, OwnAddress2); +} + +/** + * @brief Enable acknowledge on Own Address2 match address. + * @rmtoll OAR2 ENDUAL LL_I2C_EnableOwnAddress2 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableOwnAddress2(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->OAR2, I2C_OAR2_ENDUAL); +} + +/** + * @brief Disable acknowledge on Own Address2 match address. + * @rmtoll OAR2 ENDUAL LL_I2C_DisableOwnAddress2 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableOwnAddress2(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->OAR2, I2C_OAR2_ENDUAL); +} + +/** + * @brief Check if Own Address1 acknowledge is enabled or disabled. + * @rmtoll OAR2 ENDUAL LL_I2C_IsEnabledOwnAddress2 + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledOwnAddress2(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->OAR2, I2C_OAR2_ENDUAL) == (I2C_OAR2_ENDUAL)); +} + +/** + * @brief Configure the Peripheral clock frequency. + * @rmtoll CR2 FREQ LL_I2C_SetPeriphClock + * @param I2Cx I2C Instance. + * @param PeriphClock Peripheral Clock (in Hz) + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetPeriphClock(I2C_TypeDef *I2Cx, uint32_t PeriphClock) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_FREQ, __LL_I2C_FREQ_HZ_TO_MHZ(PeriphClock)); +} + +/** + * @brief Get the Peripheral clock frequency. + * @rmtoll CR2 FREQ LL_I2C_GetPeriphClock + * @param I2Cx I2C Instance. + * @retval Value of Peripheral Clock (in Hz) + */ +__STATIC_INLINE uint32_t LL_I2C_GetPeriphClock(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(__LL_I2C_FREQ_MHZ_TO_HZ(READ_BIT(I2Cx->CR2, I2C_CR2_FREQ))); +} + +/** + * @brief Configure the Duty cycle (Fast mode only). + * @rmtoll CCR DUTY LL_I2C_SetDutyCycle + * @param I2Cx I2C Instance. + * @param DutyCycle This parameter can be one of the following values: + * @arg @ref LL_I2C_DUTYCYCLE_2 + * @arg @ref LL_I2C_DUTYCYCLE_16_9 + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetDutyCycle(I2C_TypeDef *I2Cx, uint32_t DutyCycle) +{ + MODIFY_REG(I2Cx->CCR, I2C_CCR_DUTY, DutyCycle); +} + +/** + * @brief Get the Duty cycle (Fast mode only). + * @rmtoll CCR DUTY LL_I2C_GetDutyCycle + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_DUTYCYCLE_2 + * @arg @ref LL_I2C_DUTYCYCLE_16_9 + */ +__STATIC_INLINE uint32_t LL_I2C_GetDutyCycle(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CCR, I2C_CCR_DUTY)); +} + +/** + * @brief Configure the I2C master clock speed mode. + * @rmtoll CCR FS LL_I2C_SetClockSpeedMode + * @param I2Cx I2C Instance. + * @param ClockSpeedMode This parameter can be one of the following values: + * @arg @ref LL_I2C_CLOCK_SPEED_STANDARD_MODE + * @arg @ref LL_I2C_CLOCK_SPEED_FAST_MODE + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetClockSpeedMode(I2C_TypeDef *I2Cx, uint32_t ClockSpeedMode) +{ + MODIFY_REG(I2Cx->CCR, I2C_CCR_FS, ClockSpeedMode); +} + +/** + * @brief Get the the I2C master speed mode. + * @rmtoll CCR FS LL_I2C_GetClockSpeedMode + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_CLOCK_SPEED_STANDARD_MODE + * @arg @ref LL_I2C_CLOCK_SPEED_FAST_MODE + */ +__STATIC_INLINE uint32_t LL_I2C_GetClockSpeedMode(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CCR, I2C_CCR_FS)); +} + +/** + * @brief Configure the SCL, SDA rising time. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll TRISE TRISE LL_I2C_SetRiseTime + * @param I2Cx I2C Instance. + * @param RiseTime This parameter must be a value between Min_Data=0x02 and Max_Data=0x3F. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetRiseTime(I2C_TypeDef *I2Cx, uint32_t RiseTime) +{ + MODIFY_REG(I2Cx->TRISE, I2C_TRISE_TRISE, RiseTime); +} + +/** + * @brief Get the SCL, SDA rising time. + * @rmtoll TRISE TRISE LL_I2C_GetRiseTime + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x02 and Max_Data=0x3F + */ +__STATIC_INLINE uint32_t LL_I2C_GetRiseTime(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TRISE, I2C_TRISE_TRISE)); +} + +/** + * @brief Configure the SCL high and low period. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CCR CCR LL_I2C_SetClockPeriod + * @param I2Cx I2C Instance. + * @param ClockPeriod This parameter must be a value between Min_Data=0x004 and Max_Data=0xFFF, except in FAST DUTY mode where Min_Data=0x001. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetClockPeriod(I2C_TypeDef *I2Cx, uint32_t ClockPeriod) +{ + MODIFY_REG(I2Cx->CCR, I2C_CCR_CCR, ClockPeriod); +} + +/** + * @brief Get the SCL high and low period. + * @rmtoll CCR CCR LL_I2C_GetClockPeriod + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x004 and Max_Data=0xFFF, except in FAST DUTY mode where Min_Data=0x001. + */ +__STATIC_INLINE uint32_t LL_I2C_GetClockPeriod(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CCR, I2C_CCR_CCR)); +} + +/** + * @brief Configure the SCL speed. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR2 FREQ LL_I2C_ConfigSpeed\n + * TRISE TRISE LL_I2C_ConfigSpeed\n + * CCR FS LL_I2C_ConfigSpeed\n + * CCR DUTY LL_I2C_ConfigSpeed\n + * CCR CCR LL_I2C_ConfigSpeed + * @param I2Cx I2C Instance. + * @param PeriphClock Peripheral Clock (in Hz) + * @param ClockSpeed This parameter must be a value lower than 400kHz (in Hz). + * @param DutyCycle This parameter can be one of the following values: + * @arg @ref LL_I2C_DUTYCYCLE_2 + * @arg @ref LL_I2C_DUTYCYCLE_16_9 + * @retval None + */ +__STATIC_INLINE void LL_I2C_ConfigSpeed(I2C_TypeDef *I2Cx, uint32_t PeriphClock, uint32_t ClockSpeed, + uint32_t DutyCycle) +{ + uint32_t freqrange = 0x0U; + uint32_t clockconfig = 0x0U; + + /* Compute frequency range */ + freqrange = __LL_I2C_FREQ_HZ_TO_MHZ(PeriphClock); + + /* Configure I2Cx: Frequency range register */ + MODIFY_REG(I2Cx->CR2, I2C_CR2_FREQ, freqrange); + + /* Configure I2Cx: Rise Time register */ + MODIFY_REG(I2Cx->TRISE, I2C_TRISE_TRISE, __LL_I2C_RISE_TIME(freqrange, ClockSpeed)); + + /* Configure Speed mode, Duty Cycle and Clock control register value */ + if (ClockSpeed > LL_I2C_MAX_SPEED_STANDARD) + { + /* Set Speed mode at fast and duty cycle for Clock Speed request in fast clock range */ + clockconfig = LL_I2C_CLOCK_SPEED_FAST_MODE | \ + __LL_I2C_SPEED_FAST_TO_CCR(PeriphClock, ClockSpeed, DutyCycle) | \ + DutyCycle; + } + else + { + /* Set Speed mode at standard for Clock Speed request in standard clock range */ + clockconfig = LL_I2C_CLOCK_SPEED_STANDARD_MODE | \ + __LL_I2C_SPEED_STANDARD_TO_CCR(PeriphClock, ClockSpeed); + } + + /* Configure I2Cx: Clock control register */ + MODIFY_REG(I2Cx->CCR, (I2C_CCR_FS | I2C_CCR_DUTY | I2C_CCR_CCR), clockconfig); +} + +/** + * @brief Configure peripheral mode. + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 SMBUS LL_I2C_SetMode\n + * CR1 SMBTYPE LL_I2C_SetMode\n + * CR1 ENARP LL_I2C_SetMode + * @param I2Cx I2C Instance. + * @param PeripheralMode This parameter can be one of the following values: + * @arg @ref LL_I2C_MODE_I2C + * @arg @ref LL_I2C_MODE_SMBUS_HOST + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE_ARP + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetMode(I2C_TypeDef *I2Cx, uint32_t PeripheralMode) +{ + MODIFY_REG(I2Cx->CR1, I2C_CR1_SMBUS | I2C_CR1_SMBTYPE | I2C_CR1_ENARP, PeripheralMode); +} + +/** + * @brief Get peripheral mode. + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 SMBUS LL_I2C_GetMode\n + * CR1 SMBTYPE LL_I2C_GetMode\n + * CR1 ENARP LL_I2C_GetMode + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_MODE_I2C + * @arg @ref LL_I2C_MODE_SMBUS_HOST + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE_ARP + */ +__STATIC_INLINE uint32_t LL_I2C_GetMode(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR1, I2C_CR1_SMBUS | I2C_CR1_SMBTYPE | I2C_CR1_ENARP)); +} + +/** + * @brief Enable SMBus alert (Host or Device mode) + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note SMBus Device mode: + * - SMBus Alert pin is drived low and + * Alert Response Address Header acknowledge is enabled. + * SMBus Host mode: + * - SMBus Alert pin management is supported. + * @rmtoll CR1 ALERT LL_I2C_EnableSMBusAlert + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusAlert(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ALERT); +} + +/** + * @brief Disable SMBus alert (Host or Device mode) + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note SMBus Device mode: + * - SMBus Alert pin is not drived (can be used as a standard GPIO) and + * Alert Response Address Header acknowledge is disabled. + * SMBus Host mode: + * - SMBus Alert pin management is not supported. + * @rmtoll CR1 ALERT LL_I2C_DisableSMBusAlert + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSMBusAlert(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ALERT); +} + +/** + * @brief Check if SMBus alert (Host or Device mode) is enabled or disabled. + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 ALERT LL_I2C_IsEnabledSMBusAlert + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusAlert(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR1, I2C_CR1_ALERT) == (I2C_CR1_ALERT)); +} + +/** + * @brief Enable SMBus Packet Error Calculation (PEC). + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 ENPEC LL_I2C_EnableSMBusPEC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusPEC(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ENPEC); +} + +/** + * @brief Disable SMBus Packet Error Calculation (PEC). + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 ENPEC LL_I2C_DisableSMBusPEC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSMBusPEC(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ENPEC); +} + +/** + * @brief Check if SMBus Packet Error Calculation (PEC) is enabled or disabled. + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 ENPEC LL_I2C_IsEnabledSMBusPEC + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusPEC(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR1, I2C_CR1_ENPEC) == (I2C_CR1_ENPEC)); +} + +/** + * @} + */ + +/** @defgroup I2C_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable TXE interrupt. + * @rmtoll CR2 ITEVTEN LL_I2C_EnableIT_TX\n + * CR2 ITBUFEN LL_I2C_EnableIT_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_TX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN); +} + +/** + * @brief Disable TXE interrupt. + * @rmtoll CR2 ITEVTEN LL_I2C_DisableIT_TX\n + * CR2 ITBUFEN LL_I2C_DisableIT_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_TX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN); +} + +/** + * @brief Check if the TXE Interrupt is enabled or disabled. + * @rmtoll CR2 ITEVTEN LL_I2C_IsEnabledIT_TX\n + * CR2 ITBUFEN LL_I2C_IsEnabledIT_TX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_TX(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN) == (I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN)); +} + +/** + * @brief Enable RXNE interrupt. + * @rmtoll CR2 ITEVTEN LL_I2C_EnableIT_RX\n + * CR2 ITBUFEN LL_I2C_EnableIT_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_RX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN); +} + +/** + * @brief Disable RXNE interrupt. + * @rmtoll CR2 ITEVTEN LL_I2C_DisableIT_RX\n + * CR2 ITBUFEN LL_I2C_DisableIT_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_RX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN); +} + +/** + * @brief Check if the RXNE Interrupt is enabled or disabled. + * @rmtoll CR2 ITEVTEN LL_I2C_IsEnabledIT_RX\n + * CR2 ITBUFEN LL_I2C_IsEnabledIT_RX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_RX(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN) == (I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN)); +} + +/** + * @brief Enable Events interrupts. + * @note Any of these events will generate interrupt : + * Start Bit (SB) + * Address sent, Address matched (ADDR) + * 10-bit header sent (ADD10) + * Stop detection (STOPF) + * Byte transfer finished (BTF) + * + * @note Any of these events will generate interrupt if Buffer interrupts are enabled too(using unitary function @ref LL_I2C_EnableIT_BUF()) : + * Receive buffer not empty (RXNE) + * Transmit buffer empty (TXE) + * @rmtoll CR2 ITEVTEN LL_I2C_EnableIT_EVT + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_EVT(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN); +} + +/** + * @brief Disable Events interrupts. + * @note Any of these events will generate interrupt : + * Start Bit (SB) + * Address sent, Address matched (ADDR) + * 10-bit header sent (ADD10) + * Stop detection (STOPF) + * Byte transfer finished (BTF) + * Receive buffer not empty (RXNE) + * Transmit buffer empty (TXE) + * @rmtoll CR2 ITEVTEN LL_I2C_DisableIT_EVT + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_EVT(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN); +} + +/** + * @brief Check if Events interrupts are enabled or disabled. + * @rmtoll CR2 ITEVTEN LL_I2C_IsEnabledIT_EVT + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_EVT(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR2, I2C_CR2_ITEVTEN) == (I2C_CR2_ITEVTEN)); +} + +/** + * @brief Enable Buffer interrupts. + * @note Any of these Buffer events will generate interrupt if Events interrupts are enabled too(using unitary function @ref LL_I2C_EnableIT_EVT()) : + * Receive buffer not empty (RXNE) + * Transmit buffer empty (TXE) + * @rmtoll CR2 ITBUFEN LL_I2C_EnableIT_BUF + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_BUF(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_ITBUFEN); +} + +/** + * @brief Disable Buffer interrupts. + * @note Any of these Buffer events will generate interrupt : + * Receive buffer not empty (RXNE) + * Transmit buffer empty (TXE) + * @rmtoll CR2 ITBUFEN LL_I2C_DisableIT_BUF + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_BUF(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_ITBUFEN); +} + +/** + * @brief Check if Buffer interrupts are enabled or disabled. + * @rmtoll CR2 ITBUFEN LL_I2C_IsEnabledIT_BUF + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_BUF(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR2, I2C_CR2_ITBUFEN) == (I2C_CR2_ITBUFEN)); +} + +/** + * @brief Enable Error interrupts. + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note Any of these errors will generate interrupt : + * Bus Error detection (BERR) + * Arbitration Loss (ARLO) + * Acknowledge Failure(AF) + * Overrun/Underrun (OVR) + * SMBus Timeout detection (TIMEOUT) + * SMBus PEC error detection (PECERR) + * SMBus Alert pin event detection (SMBALERT) + * @rmtoll CR2 ITERREN LL_I2C_EnableIT_ERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_ERR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_ITERREN); +} + +/** + * @brief Disable Error interrupts. + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note Any of these errors will generate interrupt : + * Bus Error detection (BERR) + * Arbitration Loss (ARLO) + * Acknowledge Failure(AF) + * Overrun/Underrun (OVR) + * SMBus Timeout detection (TIMEOUT) + * SMBus PEC error detection (PECERR) + * SMBus Alert pin event detection (SMBALERT) + * @rmtoll CR2 ITERREN LL_I2C_DisableIT_ERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_ERR(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_ITERREN); +} + +/** + * @brief Check if Error interrupts are enabled or disabled. + * @rmtoll CR2 ITERREN LL_I2C_IsEnabledIT_ERR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_ERR(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR2, I2C_CR2_ITERREN) == (I2C_CR2_ITERREN)); +} + +/** + * @} + */ + +/** @defgroup I2C_LL_EF_FLAG_management FLAG_management + * @{ + */ + +/** + * @brief Indicate the status of Transmit data register empty flag. + * @note RESET: When next data is written in Transmit data register. + * SET: When Transmit data register is empty. + * @rmtoll SR1 TXE LL_I2C_IsActiveFlag_TXE + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TXE(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_TXE) == (I2C_SR1_TXE)); +} + +/** + * @brief Indicate the status of Byte Transfer Finished flag. + * RESET: When Data byte transfer not done. + * SET: When Data byte transfer succeeded. + * @rmtoll SR1 BTF LL_I2C_IsActiveFlag_BTF + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BTF(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_BTF) == (I2C_SR1_BTF)); +} + +/** + * @brief Indicate the status of Receive data register not empty flag. + * @note RESET: When Receive data register is read. + * SET: When the received data is copied in Receive data register. + * @rmtoll SR1 RXNE LL_I2C_IsActiveFlag_RXNE + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_RXNE(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_RXNE) == (I2C_SR1_RXNE)); +} + +/** + * @brief Indicate the status of Start Bit (master mode). + * @note RESET: When No Start condition. + * SET: When Start condition is generated. + * @rmtoll SR1 SB LL_I2C_IsActiveFlag_SB + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_SB(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_SB) == (I2C_SR1_SB)); +} + +/** + * @brief Indicate the status of Address sent (master mode) or Address matched flag (slave mode). + * @note RESET: Clear default value. + * SET: When the address is fully sent (master mode) or when the received slave address matched with one of the enabled slave address (slave mode). + * @rmtoll SR1 ADDR LL_I2C_IsActiveFlag_ADDR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ADDR(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_ADDR) == (I2C_SR1_ADDR)); +} + +/** + * @brief Indicate the status of 10-bit header sent (master mode). + * @note RESET: When no ADD10 event occurred. + * SET: When the master has sent the first address byte (header). + * @rmtoll SR1 ADD10 LL_I2C_IsActiveFlag_ADD10 + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ADD10(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_ADD10) == (I2C_SR1_ADD10)); +} + +/** + * @brief Indicate the status of Acknowledge failure flag. + * @note RESET: No acknowledge failure. + * SET: When an acknowledge failure is received after a byte transmission. + * @rmtoll SR1 AF LL_I2C_IsActiveFlag_AF + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_AF(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_AF) == (I2C_SR1_AF)); +} + +/** + * @brief Indicate the status of Stop detection flag (slave mode). + * @note RESET: Clear default value. + * SET: When a Stop condition is detected. + * @rmtoll SR1 STOPF LL_I2C_IsActiveFlag_STOP + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_STOP(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_STOPF) == (I2C_SR1_STOPF)); +} + +/** + * @brief Indicate the status of Bus error flag. + * @note RESET: Clear default value. + * SET: When a misplaced Start or Stop condition is detected. + * @rmtoll SR1 BERR LL_I2C_IsActiveFlag_BERR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BERR(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_BERR) == (I2C_SR1_BERR)); +} + +/** + * @brief Indicate the status of Arbitration lost flag. + * @note RESET: Clear default value. + * SET: When arbitration lost. + * @rmtoll SR1 ARLO LL_I2C_IsActiveFlag_ARLO + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ARLO(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_ARLO) == (I2C_SR1_ARLO)); +} + +/** + * @brief Indicate the status of Overrun/Underrun flag. + * @note RESET: Clear default value. + * SET: When an overrun/underrun error occurs (Clock Stretching Disabled). + * @rmtoll SR1 OVR LL_I2C_IsActiveFlag_OVR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_OVR(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_OVR) == (I2C_SR1_OVR)); +} + +/** + * @brief Indicate the status of SMBus PEC error flag in reception. + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll SR1 PECERR LL_I2C_IsActiveSMBusFlag_PECERR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_PECERR(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_PECERR) == (I2C_SR1_PECERR)); +} + +/** + * @brief Indicate the status of SMBus Timeout detection flag. + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll SR1 TIMEOUT LL_I2C_IsActiveSMBusFlag_TIMEOUT + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_TIMEOUT(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_TIMEOUT) == (I2C_SR1_TIMEOUT)); +} + +/** + * @brief Indicate the status of SMBus alert flag. + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll SR1 SMBALERT LL_I2C_IsActiveSMBusFlag_ALERT + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_ALERT(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR1, I2C_SR1_SMBALERT) == (I2C_SR1_SMBALERT)); +} + +/** + * @brief Indicate the status of Bus Busy flag. + * @note RESET: Clear default value. + * SET: When a Start condition is detected. + * @rmtoll SR2 BUSY LL_I2C_IsActiveFlag_BUSY + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BUSY(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR2, I2C_SR2_BUSY) == (I2C_SR2_BUSY)); +} + +/** + * @brief Indicate the status of Dual flag. + * @note RESET: Received address matched with OAR1. + * SET: Received address matched with OAR2. + * @rmtoll SR2 DUALF LL_I2C_IsActiveFlag_DUAL + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_DUAL(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR2, I2C_SR2_DUALF) == (I2C_SR2_DUALF)); +} + +/** + * @brief Indicate the status of SMBus Host address reception (Slave mode). + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note RESET: No SMBus Host address + * SET: SMBus Host address received. + * @note This status is cleared by hardware after a STOP condition or repeated START condition. + * @rmtoll SR2 SMBHOST LL_I2C_IsActiveSMBusFlag_SMBHOST + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_SMBHOST(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR2, I2C_SR2_SMBHOST) == (I2C_SR2_SMBHOST)); +} + +/** + * @brief Indicate the status of SMBus Device default address reception (Slave mode). + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note RESET: No SMBus Device default address + * SET: SMBus Device default address received. + * @note This status is cleared by hardware after a STOP condition or repeated START condition. + * @rmtoll SR2 SMBDEFAULT LL_I2C_IsActiveSMBusFlag_SMBDEFAULT + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_SMBDEFAULT(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR2, I2C_SR2_SMBDEFAULT) == (I2C_SR2_SMBDEFAULT)); +} + +/** + * @brief Indicate the status of General call address reception (Slave mode). + * @note RESET: No General call address + * SET: General call address received. + * @note This status is cleared by hardware after a STOP condition or repeated START condition. + * @rmtoll SR2 GENCALL LL_I2C_IsActiveFlag_GENCALL + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_GENCALL(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR2, I2C_SR2_GENCALL) == (I2C_SR2_GENCALL)); +} + +/** + * @brief Indicate the status of Master/Slave flag. + * @note RESET: Slave Mode. + * SET: Master Mode. + * @rmtoll SR2 MSL LL_I2C_IsActiveFlag_MSL + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_MSL(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->SR2, I2C_SR2_MSL) == (I2C_SR2_MSL)); +} + +/** + * @brief Clear Address Matched flag. + * @note Clearing this flag is done by a read access to the I2Cx_SR1 + * register followed by a read access to the I2Cx_SR2 register. + * @rmtoll SR1 ADDR LL_I2C_ClearFlag_ADDR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_ADDR(I2C_TypeDef *I2Cx) +{ + __IO uint32_t tmpreg; + tmpreg = I2Cx->SR1; + (void) tmpreg; + tmpreg = I2Cx->SR2; + (void) tmpreg; +} + +/** + * @brief Clear Acknowledge failure flag. + * @rmtoll SR1 AF LL_I2C_ClearFlag_AF + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_AF(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->SR1, I2C_SR1_AF); +} + +/** + * @brief Clear Stop detection flag. + * @note Clearing this flag is done by a read access to the I2Cx_SR1 + * register followed by a write access to I2Cx_CR1 register. + * @rmtoll SR1 STOPF LL_I2C_ClearFlag_STOP\n + * CR1 PE LL_I2C_ClearFlag_STOP + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_STOP(I2C_TypeDef *I2Cx) +{ + __IO uint32_t tmpreg; + tmpreg = I2Cx->SR1; + (void) tmpreg; + SET_BIT(I2Cx->CR1, I2C_CR1_PE); +} + +/** + * @brief Clear Bus error flag. + * @rmtoll SR1 BERR LL_I2C_ClearFlag_BERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_BERR(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->SR1, I2C_SR1_BERR); +} + +/** + * @brief Clear Arbitration lost flag. + * @rmtoll SR1 ARLO LL_I2C_ClearFlag_ARLO + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_ARLO(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->SR1, I2C_SR1_ARLO); +} + +/** + * @brief Clear Overrun/Underrun flag. + * @rmtoll SR1 OVR LL_I2C_ClearFlag_OVR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_OVR(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->SR1, I2C_SR1_OVR); +} + +/** + * @brief Clear SMBus PEC error flag. + * @rmtoll SR1 PECERR LL_I2C_ClearSMBusFlag_PECERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearSMBusFlag_PECERR(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->SR1, I2C_SR1_PECERR); +} + +/** + * @brief Clear SMBus Timeout detection flag. + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll SR1 TIMEOUT LL_I2C_ClearSMBusFlag_TIMEOUT + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearSMBusFlag_TIMEOUT(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->SR1, I2C_SR1_TIMEOUT); +} + +/** + * @brief Clear SMBus Alert flag. + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll SR1 SMBALERT LL_I2C_ClearSMBusFlag_ALERT + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearSMBusFlag_ALERT(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->SR1, I2C_SR1_SMBALERT); +} + +/** + * @} + */ + +/** @defgroup I2C_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Enable Reset of I2C peripheral. + * @rmtoll CR1 SWRST LL_I2C_EnableReset + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableReset(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_SWRST); +} + +/** + * @brief Disable Reset of I2C peripheral. + * @rmtoll CR1 SWRST LL_I2C_DisableReset + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableReset(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_SWRST); +} + +/** + * @brief Check if the I2C peripheral is under reset state or not. + * @rmtoll CR1 SWRST LL_I2C_IsResetEnabled + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsResetEnabled(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR1, I2C_CR1_SWRST) == (I2C_CR1_SWRST)); +} + +/** + * @brief Prepare the generation of a ACKnowledge or Non ACKnowledge condition after the address receive match code or next received byte. + * @note Usage in Slave or Master mode. + * @rmtoll CR1 ACK LL_I2C_AcknowledgeNextData + * @param I2Cx I2C Instance. + * @param TypeAcknowledge This parameter can be one of the following values: + * @arg @ref LL_I2C_ACK + * @arg @ref LL_I2C_NACK + * @retval None + */ +__STATIC_INLINE void LL_I2C_AcknowledgeNextData(I2C_TypeDef *I2Cx, uint32_t TypeAcknowledge) +{ + MODIFY_REG(I2Cx->CR1, I2C_CR1_ACK, TypeAcknowledge); +} + +/** + * @brief Generate a START or RESTART condition + * @note The START bit can be set even if bus is BUSY or I2C is in slave mode. + * This action has no effect when RELOAD is set. + * @rmtoll CR1 START LL_I2C_GenerateStartCondition + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_GenerateStartCondition(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_START); +} + +/** + * @brief Generate a STOP condition after the current byte transfer (master mode). + * @rmtoll CR1 STOP LL_I2C_GenerateStopCondition + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_GenerateStopCondition(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_STOP); +} + +/** + * @brief Enable bit POS (master/host mode). + * @note In that case, the ACK bit controls the (N)ACK of the next byte received or the PEC bit indicates that the next byte in shift register is a PEC. + * @rmtoll CR1 POS LL_I2C_EnableBitPOS + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableBitPOS(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_POS); +} + +/** + * @brief Disable bit POS (master/host mode). + * @note In that case, the ACK bit controls the (N)ACK of the current byte received or the PEC bit indicates that the current byte in shift register is a PEC. + * @rmtoll CR1 POS LL_I2C_DisableBitPOS + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableBitPOS(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_POS); +} + +/** + * @brief Check if bit POS is enabled or disabled. + * @rmtoll CR1 POS LL_I2C_IsEnabledBitPOS + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledBitPOS(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR1, I2C_CR1_POS) == (I2C_CR1_POS)); +} + +/** + * @brief Indicate the value of transfer direction. + * @note RESET: Bus is in read transfer (peripheral point of view). + * SET: Bus is in write transfer (peripheral point of view). + * @rmtoll SR2 TRA LL_I2C_GetTransferDirection + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_DIRECTION_WRITE + * @arg @ref LL_I2C_DIRECTION_READ + */ +__STATIC_INLINE uint32_t LL_I2C_GetTransferDirection(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->SR2, I2C_SR2_TRA)); +} + +/** + * @brief Enable DMA last transfer. + * @note This action mean that next DMA EOT is the last transfer. + * @rmtoll CR2 LAST LL_I2C_EnableLastDMA + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableLastDMA(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_LAST); +} + +/** + * @brief Disable DMA last transfer. + * @note This action mean that next DMA EOT is not the last transfer. + * @rmtoll CR2 LAST LL_I2C_DisableLastDMA + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableLastDMA(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_LAST); +} + +/** + * @brief Check if DMA last transfer is enabled or disabled. + * @rmtoll CR2 LAST LL_I2C_IsEnabledLastDMA + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledLastDMA(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR2, I2C_CR2_LAST) == (I2C_CR2_LAST)); +} + +/** + * @brief Enable transfer or internal comparison of the SMBus Packet Error byte (transmission or reception mode). + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note This feature is cleared by hardware when the PEC byte is transferred or compared, + * or by a START or STOP condition, it is also cleared by software. + * @rmtoll CR1 PEC LL_I2C_EnableSMBusPECCompare + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusPECCompare(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_PEC); +} + +/** + * @brief Disable transfer or internal comparison of the SMBus Packet Error byte (transmission or reception mode). + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 PEC LL_I2C_DisableSMBusPECCompare + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSMBusPECCompare(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_PEC); +} + +/** + * @brief Check if the SMBus Packet Error byte transfer or internal comparison is requested or not. + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 PEC LL_I2C_IsEnabledSMBusPECCompare + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusPECCompare(I2C_TypeDef *I2Cx) +{ + return (READ_BIT(I2Cx->CR1, I2C_CR1_PEC) == (I2C_CR1_PEC)); +} + +/** + * @brief Get the SMBus Packet Error byte calculated. + * @note Macro @ref IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll SR2 PEC LL_I2C_GetSMBusPEC + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusPEC(I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->SR2, I2C_SR2_PEC) >> I2C_SR2_PEC_Pos); +} + +/** + * @brief Read Receive Data register. + * @rmtoll DR DR LL_I2C_ReceiveData8 + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_I2C_ReceiveData8(I2C_TypeDef *I2Cx) +{ + return (uint8_t)(READ_BIT(I2Cx->DR, I2C_DR_DR)); +} + +/** + * @brief Write in Transmit Data Register . + * @rmtoll DR DR LL_I2C_TransmitData8 + * @param I2Cx I2C Instance. + * @param Data Value between Min_Data=0x0 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_I2C_TransmitData8(I2C_TypeDef *I2Cx, uint8_t Data) +{ + MODIFY_REG(I2Cx->DR, I2C_DR_DR, Data); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2C_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +uint32_t LL_I2C_Init(I2C_TypeDef *I2Cx, LL_I2C_InitTypeDef *I2C_InitStruct); +uint32_t LL_I2C_DeInit(I2C_TypeDef *I2Cx); +void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct); + + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* I2C1 || I2C2 || I2C3 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_LL_I2C_H */ + diff --git a/HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c b/HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c new file mode 100644 index 0000000..c2a8eb7 --- /dev/null +++ b/HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c @@ -0,0 +1,7524 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_i2c.c + * @author MCD Application Team + * @brief I2C HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Inter Integrated Circuit (I2C) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State, Mode and Error functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The I2C HAL driver can be used as follows: + + (#) Declare a I2C_HandleTypeDef handle structure, for example: + I2C_HandleTypeDef hi2c; + + (#)Initialize the I2C low level resources by implementing the HAL_I2C_MspInit() API: + (##) Enable the I2Cx interface clock + (##) I2C pins configuration + (+++) Enable the clock for the I2C GPIOs + (+++) Configure I2C pins as alternate function open-drain + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the I2Cx interrupt priority + (+++) Enable the NVIC I2C IRQ Channel + (##) DMA Configuration if you need to use DMA process + (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive stream + (+++) Enable the DMAx interface clock using + (+++) Configure the DMA handle parameters + (+++) Configure the DMA Tx or Rx stream + (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on + the DMA Tx or Rx stream + + (#) Configure the Communication Speed, Duty cycle, Addressing mode, Own Address1, + Dual Addressing mode, Own Address2, General call and Nostretch mode in the hi2c Init structure. + + (#) Initialize the I2C registers by calling the HAL_I2C_Init(), configures also the low level Hardware + (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_I2C_MspInit() API. + + (#) To check if target device is ready for communication, use the function HAL_I2C_IsDeviceReady() + + (#) For I2C IO and IO MEM operations, three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Transmit in master mode an amount of data in blocking mode using HAL_I2C_Master_Transmit() + (+) Receive in master mode an amount of data in blocking mode using HAL_I2C_Master_Receive() + (+) Transmit in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Transmit() + (+) Receive in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Receive() + + *** Polling mode IO MEM operation *** + ===================================== + [..] + (+) Write an amount of data in blocking mode to a specific memory address using HAL_I2C_Mem_Write() + (+) Read an amount of data in blocking mode from a specific memory address using HAL_I2C_Mem_Read() + + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Transmit_IT() + (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Receive_IT() + (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Transmit_IT() + (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Receive_IT() + (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2C_ErrorCallback() + (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_AbortCpltCallback() + + *** Interrupt mode or DMA mode IO sequential operation *** + ========================================================== + [..] + (@) These interfaces allow to manage a sequential transfer with a repeated start condition + when a direction change during transfer + [..] + (+) A specific option field manage the different steps of a sequential transfer + (+) Option field values are defined through I2C_XferOptions_definition and are listed below: + (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functional is same as associated interfaces in no sequential mode + (++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address + and data to transfer without a final stop condition + (++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with start condition, address + and data to transfer without a final stop condition, an then permit a call the same master sequential interface + several times (like HAL_I2C_Master_Seq_Transmit_IT() then HAL_I2C_Master_Seq_Transmit_IT() + or HAL_I2C_Master_Seq_Transmit_DMA() then HAL_I2C_Master_Seq_Transmit_DMA()) + (++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to transfer + if no direction change and without a final stop condition in both cases + (++) I2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to transfer + if no direction change and with a final stop condition in both cases + (++) I2C_LAST_FRAME_NO_STOP: Sequential usage (Master only), this option allow to manage a restart condition after several call of the same master sequential + interface several times (link with option I2C_FIRST_AND_NEXT_FRAME). + Usage can, transfer several bytes one by one using HAL_I2C_Master_Seq_Transmit_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME) + or HAL_I2C_Master_Seq_Receive_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME) + or HAL_I2C_Master_Seq_Transmit_DMA(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME) + or HAL_I2C_Master_Seq_Receive_DMA(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME). + Then usage of this option I2C_LAST_FRAME_NO_STOP at the last Transmit or Receive sequence permit to call the opposite interface Receive or Transmit + without stopping the communication and so generate a restart condition. + (++) I2C_OTHER_FRAME: Sequential usage (Master only), this option allow to manage a restart condition after each call of the same master sequential + interface. + Usage can, transfer several bytes one by one with a restart with slave address between each bytes using HAL_I2C_Master_Seq_Transmit_IT(option I2C_FIRST_FRAME then I2C_OTHER_FRAME) + or HAL_I2C_Master_Seq_Receive_IT(option I2C_FIRST_FRAME then I2C_OTHER_FRAME) + or HAL_I2C_Master_Seq_Transmit_DMA(option I2C_FIRST_FRAME then I2C_OTHER_FRAME) + or HAL_I2C_Master_Seq_Receive_DMA(option I2C_FIRST_FRAME then I2C_OTHER_FRAME). + Then usage of this option I2C_OTHER_AND_LAST_FRAME at the last frame to help automatic generation of STOP condition. + + (+) Different sequential I2C interfaces are listed below: + (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using HAL_I2C_Master_Seq_Transmit_IT() + or using HAL_I2C_Master_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, HAL_I2C_MasterTxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (++) Sequential receive in master I2C mode an amount of data in non-blocking mode using HAL_I2C_Master_Seq_Receive_IT() + or using HAL_I2C_Master_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, HAL_I2C_MasterRxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (++) Abort a master IT or DMA I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+++) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (++) Enable/disable the Address listen mode in slave I2C mode using HAL_I2C_EnableListen_IT() HAL_I2C_DisableListen_IT() + (+++) When address slave I2C match, HAL_I2C_AddrCallback() is executed and user can + add his own code to check the Address Match Code and the transmission direction request by master (Write/Read). + (+++) At Listen mode end HAL_I2C_ListenCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_ListenCpltCallback() + (++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using HAL_I2C_Slave_Seq_Transmit_IT() + or using HAL_I2C_Slave_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, HAL_I2C_SlaveTxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using HAL_I2C_Slave_Seq_Receive_IT() + or using HAL_I2C_Slave_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, HAL_I2C_SlaveRxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (++) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2C_ErrorCallback() + + *** Interrupt mode IO MEM operation *** + ======================================= + [..] + (+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using + HAL_I2C_Mem_Write_IT() + (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using + HAL_I2C_Mem_Read_IT() + (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2C_ErrorCallback() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Master_Transmit_DMA() + (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Master_Receive_DMA() + (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Slave_Transmit_DMA() + (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Slave_Receive_DMA() + (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2C_ErrorCallback() + (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_AbortCpltCallback() + + *** DMA mode IO MEM operation *** + ================================= + [..] + (+) Write an amount of data in non-blocking mode with DMA to a specific memory address using + HAL_I2C_Mem_Write_DMA() + (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with DMA from a specific memory address using + HAL_I2C_Mem_Read_DMA() + (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2C_ErrorCallback() + + + *** I2C HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in I2C HAL driver. + + (+) __HAL_I2C_ENABLE: Enable the I2C peripheral + (+) __HAL_I2C_DISABLE: Disable the I2C peripheral + (+) __HAL_I2C_GET_FLAG: Checks whether the specified I2C flag is set or not + (+) __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag + (+) __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt + (+) __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt + + *** Callback registration *** + ============================================= + [..] + The compilation flag USE_HAL_I2C_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_I2C_RegisterCallback() or HAL_I2C_RegisterAddrCallback() + to register an interrupt callback. + [..] + Function HAL_I2C_RegisterCallback() allows to register following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) MemTxCpltCallback : callback for Memory transmission end of transfer. + (+) MemRxCpltCallback : callback for Memory reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + For specific callback AddrCallback use dedicated register callbacks : HAL_I2C_RegisterAddrCallback(). + [..] + Use function HAL_I2C_UnRegisterCallback to reset a callback to the default + weak function. + HAL_I2C_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) MemTxCpltCallback : callback for Memory transmission end of transfer. + (+) MemRxCpltCallback : callback for Memory reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + [..] + For callback AddrCallback use dedicated register callbacks : HAL_I2C_UnRegisterAddrCallback(). + [..] + By default, after the HAL_I2C_Init() and when the state is HAL_I2C_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_I2C_MasterTxCpltCallback(), HAL_I2C_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_I2C_Init()/ HAL_I2C_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the HAL_I2C_Init()/ HAL_I2C_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + Callbacks can be registered/unregistered in HAL_I2C_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_I2C_STATE_READY or HAL_I2C_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_I2C_RegisterCallback() before calling HAL_I2C_DeInit() + or HAL_I2C_Init() function. + [..] + When the compilation flag USE_HAL_I2C_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + + + [..] + (@) You can refer to the I2C HAL driver header file for more useful macros + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup I2C I2C + * @brief I2C HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup I2C_Private_Define + * @{ + */ +#define I2C_TIMEOUT_FLAG 35U /*!< Timeout 35 ms */ +#define I2C_TIMEOUT_BUSY_FLAG 25U /*!< Timeout 25 ms */ +#define I2C_TIMEOUT_STOP_FLAG 5U /*!< Timeout 5 ms */ +#define I2C_NO_OPTION_FRAME 0xFFFF0000U /*!< XferOptions default value */ + +/* Private define for @ref PreviousState usage */ +#define I2C_STATE_MSK ((uint32_t)((uint32_t)((uint32_t)HAL_I2C_STATE_BUSY_TX | (uint32_t)HAL_I2C_STATE_BUSY_RX) & (uint32_t)(~((uint32_t)HAL_I2C_STATE_READY)))) /*!< Mask State define, keep only RX and TX bits */ +#define I2C_STATE_NONE ((uint32_t)(HAL_I2C_MODE_NONE)) /*!< Default Value */ +#define I2C_STATE_MASTER_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MASTER)) /*!< Master Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MASTER_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MASTER)) /*!< Master Busy RX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_SLAVE)) /*!< Slave Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_SLAVE)) /*!< Slave Busy RX, combinaison of State LSB and Mode enum */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ +/* Private functions to handle DMA transfer */ +static void I2C_DMAXferCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAError(DMA_HandleTypeDef *hdma); +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma); + +static void I2C_ITError(I2C_HandleTypeDef *hi2c); + +static HAL_StatusTypeDef I2C_MasterRequestWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_MasterRequestRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart); + +/* Private functions to handle flags during polling transfer */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnMasterAddressFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnTXEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnBTFFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnSTOPRequestThroughIT(I2C_HandleTypeDef *hi2c); +static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c); + +/* Private functions for I2C transfer IRQ handler */ +static void I2C_MasterTransmit_TXE(I2C_HandleTypeDef *hi2c); +static void I2C_MasterTransmit_BTF(I2C_HandleTypeDef *hi2c); +static void I2C_MasterReceive_RXNE(I2C_HandleTypeDef *hi2c); +static void I2C_MasterReceive_BTF(I2C_HandleTypeDef *hi2c); +static void I2C_Master_SB(I2C_HandleTypeDef *hi2c); +static void I2C_Master_ADD10(I2C_HandleTypeDef *hi2c); +static void I2C_Master_ADDR(I2C_HandleTypeDef *hi2c); + +static void I2C_SlaveTransmit_TXE(I2C_HandleTypeDef *hi2c); +static void I2C_SlaveTransmit_BTF(I2C_HandleTypeDef *hi2c); +static void I2C_SlaveReceive_RXNE(I2C_HandleTypeDef *hi2c); +static void I2C_SlaveReceive_BTF(I2C_HandleTypeDef *hi2c); +static void I2C_Slave_ADDR(I2C_HandleTypeDef *hi2c, uint32_t IT2Flags); +static void I2C_Slave_STOPF(I2C_HandleTypeDef *hi2c); +static void I2C_Slave_AF(I2C_HandleTypeDef *hi2c); + +static void I2C_MemoryTransmit_TXE_BTF(I2C_HandleTypeDef *hi2c); + +/* Private function to Convert Specific options */ +static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Functions I2C Exported Functions + * @{ + */ + +/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + deinitialize the I2Cx peripheral: + + (+) User must Implement HAL_I2C_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC). + + (+) Call the function HAL_I2C_Init() to configure the selected device with + the selected configuration: + (++) Communication Speed + (++) Duty cycle + (++) Addressing mode + (++) Own Address 1 + (++) Dual Addressing mode + (++) Own Address 2 + (++) General call mode + (++) Nostretch mode + + (+) Call the function HAL_I2C_DeInit() to restore the default configuration + of the selected I2Cx peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the I2C according to the specified parameters + * in the I2C_InitTypeDef and initialize the associated handle. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c) +{ + uint32_t freqrange; + uint32_t pclk1; + + /* Check the I2C handle allocation */ + if (hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_CLOCK_SPEED(hi2c->Init.ClockSpeed)); + assert_param(IS_I2C_DUTY_CYCLE(hi2c->Init.DutyCycle)); + assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1)); + assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode)); + assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode)); + assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2)); + assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode)); + assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode)); + + if (hi2c->State == HAL_I2C_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hi2c->Lock = HAL_UNLOCKED; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + /* Init the I2C Callback settings */ + hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ + hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ + hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ + hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ + + if (hi2c->MspInitCallback == NULL) + { + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + hi2c->MspInitCallback(hi2c); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + HAL_I2C_MspInit(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /*Reset I2C*/ + hi2c->Instance->CR1 |= I2C_CR1_SWRST; + hi2c->Instance->CR1 &= ~I2C_CR1_SWRST; + + /* Get PCLK1 frequency */ + pclk1 = HAL_RCC_GetPCLK1Freq(); + + /* Check the minimum allowed PCLK1 frequency */ + if (I2C_MIN_PCLK_FREQ(pclk1, hi2c->Init.ClockSpeed) == 1U) + { + return HAL_ERROR; + } + + /* Calculate frequency range */ + freqrange = I2C_FREQRANGE(pclk1); + + /*---------------------------- I2Cx CR2 Configuration ----------------------*/ + /* Configure I2Cx: Frequency range */ + MODIFY_REG(hi2c->Instance->CR2, I2C_CR2_FREQ, freqrange); + + /*---------------------------- I2Cx TRISE Configuration --------------------*/ + /* Configure I2Cx: Rise Time */ + MODIFY_REG(hi2c->Instance->TRISE, I2C_TRISE_TRISE, I2C_RISE_TIME(freqrange, hi2c->Init.ClockSpeed)); + + /*---------------------------- I2Cx CCR Configuration ----------------------*/ + /* Configure I2Cx: Speed */ + MODIFY_REG(hi2c->Instance->CCR, (I2C_CCR_FS | I2C_CCR_DUTY | I2C_CCR_CCR), I2C_SPEED(pclk1, hi2c->Init.ClockSpeed, hi2c->Init.DutyCycle)); + + /*---------------------------- I2Cx CR1 Configuration ----------------------*/ + /* Configure I2Cx: Generalcall and NoStretch mode */ + MODIFY_REG(hi2c->Instance->CR1, (I2C_CR1_ENGC | I2C_CR1_NOSTRETCH), (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode)); + + /*---------------------------- I2Cx OAR1 Configuration ---------------------*/ + /* Configure I2Cx: Own Address1 and addressing mode */ + MODIFY_REG(hi2c->Instance->OAR1, (I2C_OAR1_ADDMODE | I2C_OAR1_ADD8_9 | I2C_OAR1_ADD1_7 | I2C_OAR1_ADD0), (hi2c->Init.AddressingMode | hi2c->Init.OwnAddress1)); + + /*---------------------------- I2Cx OAR2 Configuration ---------------------*/ + /* Configure I2Cx: Dual mode and Own Address2 */ + MODIFY_REG(hi2c->Instance->OAR2, (I2C_OAR2_ENDUAL | I2C_OAR2_ADD2), (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2)); + + /* Enable the selected I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + return HAL_OK; +} + +/** + * @brief DeInitialize the I2C peripheral. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c) +{ + /* Check the I2C handle allocation */ + if (hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the I2C Peripheral Clock */ + __HAL_I2C_DISABLE(hi2c); + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + if (hi2c->MspDeInitCallback == NULL) + { + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + hi2c->MspDeInitCallback(hi2c); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_I2C_MspDeInit(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_RESET; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Initialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User I2C Callback + * To be used instead of the weak predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID + * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID + * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID + * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, pI2C_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hi2c); + + if (HAL_I2C_STATE_READY == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : + hi2c->MasterTxCpltCallback = pCallback; + break; + + case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : + hi2c->MasterRxCpltCallback = pCallback; + break; + + case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : + hi2c->SlaveTxCpltCallback = pCallback; + break; + + case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : + hi2c->SlaveRxCpltCallback = pCallback; + break; + + case HAL_I2C_LISTEN_COMPLETE_CB_ID : + hi2c->ListenCpltCallback = pCallback; + break; + + case HAL_I2C_MEM_TX_COMPLETE_CB_ID : + hi2c->MemTxCpltCallback = pCallback; + break; + + case HAL_I2C_MEM_RX_COMPLETE_CB_ID : + hi2c->MemRxCpltCallback = pCallback; + break; + + case HAL_I2C_ERROR_CB_ID : + hi2c->ErrorCallback = pCallback; + break; + + case HAL_I2C_ABORT_CB_ID : + hi2c->AbortCpltCallback = pCallback; + break; + + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = pCallback; + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2C_STATE_RESET == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = pCallback; + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + return status; +} + +/** + * @brief Unregister an I2C Callback + * I2C callback is redirected to the weak predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * This parameter can be one of the following values: + * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID + * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID + * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID + * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hi2c); + + if (HAL_I2C_STATE_READY == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : + hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + break; + + case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : + hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + break; + + case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : + hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + break; + + case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : + hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + break; + + case HAL_I2C_LISTEN_COMPLETE_CB_ID : + hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + break; + + case HAL_I2C_MEM_TX_COMPLETE_CB_ID : + hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ + break; + + case HAL_I2C_MEM_RX_COMPLETE_CB_ID : + hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ + break; + + case HAL_I2C_ERROR_CB_ID : + hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_I2C_ABORT_CB_ID : + hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2C_STATE_RESET == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + return status; +} + +/** + * @brief Register the Slave Address Match I2C Callback + * To be used instead of the weak HAL_I2C_AddrCallback() predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pCallback pointer to the Address Match Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hi2c); + + if (HAL_I2C_STATE_READY == hi2c->State) + { + hi2c->AddrCallback = pCallback; + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + return status; +} + +/** + * @brief UnRegister the Slave Address Match I2C Callback + * Info Ready I2C Callback is redirected to the weak HAL_I2C_AddrCallback() predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hi2c); + + if (HAL_I2C_STATE_READY == hi2c->State) + { + hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + return status; +} + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the I2C data + transfers. + + (#) There are two modes of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using Interrupts + or DMA. These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + + (#) Blocking mode functions are : + (++) HAL_I2C_Master_Transmit() + (++) HAL_I2C_Master_Receive() + (++) HAL_I2C_Slave_Transmit() + (++) HAL_I2C_Slave_Receive() + (++) HAL_I2C_Mem_Write() + (++) HAL_I2C_Mem_Read() + (++) HAL_I2C_IsDeviceReady() + + (#) No-Blocking mode functions with Interrupt are : + (++) HAL_I2C_Master_Transmit_IT() + (++) HAL_I2C_Master_Receive_IT() + (++) HAL_I2C_Slave_Transmit_IT() + (++) HAL_I2C_Slave_Receive_IT() + (++) HAL_I2C_Mem_Write_IT() + (++) HAL_I2C_Mem_Read_IT() + (++) HAL_I2C_Master_Seq_Transmit_IT() + (++) HAL_I2C_Master_Seq_Receive_IT() + (++) HAL_I2C_Slave_Seq_Transmit_IT() + (++) HAL_I2C_Slave_Seq_Receive_IT() + (++) HAL_I2C_EnableListen_IT() + (++) HAL_I2C_DisableListen_IT() + (++) HAL_I2C_Master_Abort_IT() + + (#) No-Blocking mode functions with DMA are : + (++) HAL_I2C_Master_Transmit_DMA() + (++) HAL_I2C_Master_Receive_DMA() + (++) HAL_I2C_Slave_Transmit_DMA() + (++) HAL_I2C_Slave_Receive_DMA() + (++) HAL_I2C_Mem_Write_DMA() + (++) HAL_I2C_Mem_Read_DMA() + (++) HAL_I2C_Master_Seq_Transmit_DMA() + (++) HAL_I2C_Master_Seq_Receive_DMA() + (++) HAL_I2C_Slave_Seq_Transmit_DMA() + (++) HAL_I2C_Slave_Seq_Receive_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_I2C_MasterTxCpltCallback() + (++) HAL_I2C_MasterRxCpltCallback() + (++) HAL_I2C_SlaveTxCpltCallback() + (++) HAL_I2C_SlaveRxCpltCallback() + (++) HAL_I2C_MemTxCpltCallback() + (++) HAL_I2C_MemRxCpltCallback() + (++) HAL_I2C_AddrCallback() + (++) HAL_I2C_ListenCpltCallback() + (++) HAL_I2C_ErrorCallback() + (++) HAL_I2C_AbortCpltCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmits in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + /* Init tickstart for timeout management*/ + uint32_t tickstart = HAL_GetTick(); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + + /* Send Slave Address */ + if (I2C_MasterRequestWrite(hi2c, DevAddress, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + while (hi2c->XferSize > 0U) + { + /* Wait until TXE flag is set */ + if (I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + } + return HAL_ERROR; + } + + /* Write data to DR */ + hi2c->Instance->DR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferCount--; + hi2c->XferSize--; + + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (hi2c->XferSize != 0U)) + { + /* Write data to DR */ + hi2c->Instance->DR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferCount--; + hi2c->XferSize--; + } + + /* Wait until BTF flag is set */ + if (I2C_WaitOnBTFFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + } + return HAL_ERROR; + } + } + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + /* Init tickstart for timeout management*/ + uint32_t tickstart = HAL_GetTick(); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + + /* Send Slave Address */ + if (I2C_MasterRequestRead(hi2c, DevAddress, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferSize == 0U) + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + } + else if (hi2c->XferSize == 1U) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + } + else if (hi2c->XferSize == 2U) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Enable Pos */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + else + { + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + + while (hi2c->XferSize > 0U) + { + if (hi2c->XferSize <= 3U) + { + /* One byte */ + if (hi2c->XferSize == 1U) + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferSize--; + hi2c->XferCount--; + } + /* Two bytes */ + else if (hi2c->XferSize == 2U) + { + /* Wait until BTF flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferSize--; + hi2c->XferCount--; + + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferSize--; + hi2c->XferCount--; + } + /* 3 Last bytes */ + else + { + /* Wait until BTF flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferSize--; + hi2c->XferCount--; + + /* Wait until BTF flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferSize--; + hi2c->XferCount--; + + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferSize--; + hi2c->XferCount--; + } + } + else + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferSize--; + hi2c->XferCount--; + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) + { + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferSize--; + hi2c->XferCount--; + } + } + } + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmits in slave mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + /* Init tickstart for timeout management*/ + uint32_t tickstart = HAL_GetTick(); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + + /* Enable Address Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* If 10bit addressing mode is selected */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + + while (hi2c->XferSize > 0U) + { + /* Wait until TXE flag is set */ + if (I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + return HAL_ERROR; + } + + /* Write data to DR */ + hi2c->Instance->DR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferCount--; + hi2c->XferSize--; + + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (hi2c->XferSize != 0U)) + { + /* Write data to DR */ + hi2c->Instance->DR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferCount--; + hi2c->XferSize--; + } + } + + /* Wait until AF flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_AF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear AF flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Disable Address Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in blocking mode + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + /* Init tickstart for timeout management*/ + uint32_t tickstart = HAL_GetTick(); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == (uint16_t)0)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + + /* Enable Address Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + while (hi2c->XferSize > 0U) + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + return HAL_ERROR; + } + + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferSize--; + hi2c->XferCount--; + + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (hi2c->XferSize != 0U)) + { + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferSize--; + hi2c->XferCount--; + } + } + + /* Wait until STOP flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + return HAL_ERROR; + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_STOPFLAG(hi2c); + + /* Disable Address Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) +{ + __IO uint32_t count = 0U; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Wait until BUSY flag is reset */ + count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock / 25U / 1000U); + do + { + count--; + if (count == 0U) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->Devaddress = DevAddress; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) +{ + __IO uint32_t count = 0U; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Wait until BUSY flag is reset */ + count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock / 25U / 1000U); + do + { + count--; + if (count == 0U) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->Devaddress = DevAddress; + + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + + /* Enable Address Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + + /* Enable Address Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) +{ + __IO uint32_t count = 0U; + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Wait until BUSY flag is reset */ + count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock / 25U / 1000U); + do + { + count--; + if (count == 0U) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->Devaddress = DevAddress; + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferM1CpltCallback = NULL; + hi2c->hdmatx->XferM1HalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA stream */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); + + /* Enable DMA Request */ + SET_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); + + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size) +{ + __IO uint32_t count = 0U; + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Wait until BUSY flag is reset */ + count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock / 25U / 1000U); + do + { + count--; + if (count == 0U) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->Devaddress = DevAddress; + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferM1CpltCallback = NULL; + hi2c->hdmarx->XferM1HalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA stream */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); + + /* Enable DMA Request */ + SET_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferM1CpltCallback = NULL; + hi2c->hdmatx->XferM1HalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA stream */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable EVT and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); + + /* Enable DMA Request */ + hi2c->Instance->CR2 |= I2C_CR2_DMAEN; + + return HAL_OK; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferM1CpltCallback = NULL; + hi2c->hdmarx->XferM1HalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA stream */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable EVT and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); + + /* Enable DMA Request */ + SET_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); + + return HAL_OK; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Write an amount of data in blocking mode to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + /* Init tickstart for timeout management*/ + uint32_t tickstart = HAL_GetTick(); + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + while (hi2c->XferSize > 0U) + { + /* Wait until TXE flag is set */ + if (I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + } + return HAL_ERROR; + } + + /* Write data to DR */ + hi2c->Instance->DR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferSize--; + hi2c->XferCount--; + + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (hi2c->XferSize != 0U)) + { + /* Write data to DR */ + hi2c->Instance->DR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferSize--; + hi2c->XferCount--; + } + } + + /* Wait until BTF flag is set */ + if (I2C_WaitOnBTFFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + } + return HAL_ERROR; + } + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in blocking mode from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + /* Init tickstart for timeout management*/ + uint32_t tickstart = HAL_GetTick(); + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferSize == 0U) + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + } + else if (hi2c->XferSize == 1U) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + } + else if (hi2c->XferSize == 2U) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Enable Pos */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + else + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + + while (hi2c->XferSize > 0U) + { + if (hi2c->XferSize <= 3U) + { + /* One byte */ + if (hi2c->XferSize == 1U) + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferSize--; + hi2c->XferCount--; + } + /* Two bytes */ + else if (hi2c->XferSize == 2U) + { + /* Wait until BTF flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferSize--; + hi2c->XferCount--; + + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferSize--; + hi2c->XferCount--; + } + /* 3 Last bytes */ + else + { + /* Wait until BTF flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferSize--; + hi2c->XferCount--; + + /* Wait until BTF flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferSize--; + hi2c->XferCount--; + + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferSize--; + hi2c->XferCount--; + } + } + else + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferSize--; + hi2c->XferCount--; + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) + { + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferSize--; + hi2c->XferCount--; + } + } + } + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Write an amount of data in non-blocking mode with Interrupt to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + __IO uint32_t count = 0U; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Wait until BUSY flag is reset */ + count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock / 25U / 1000U); + do + { + count--; + if (count == 0U) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->Devaddress = DevAddress; + hi2c->Memaddress = MemAddress; + hi2c->MemaddSize = MemAddSize; + hi2c->EventCount = 0U; + + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in non-blocking mode with Interrupt from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + __IO uint32_t count = 0U; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Wait until BUSY flag is reset */ + count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock / 25U / 1000U); + do + { + count--; + if (count == 0U) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->Devaddress = DevAddress; + hi2c->Memaddress = MemAddress; + hi2c->MemaddSize = MemAddSize; + hi2c->EventCount = 0U; + + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + if (hi2c->XferSize > 0U) + { + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + } + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Write an amount of data in non-blocking mode with DMA to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + __IO uint32_t count = 0U; + HAL_StatusTypeDef dmaxferstatus; + + /* Init tickstart for timeout management*/ + uint32_t tickstart = HAL_GetTick(); + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Wait until BUSY flag is reset */ + count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock / 25U / 1000U); + do + { + count--; + if (count == 0U) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->Devaddress = DevAddress; + hi2c->Memaddress = MemAddress; + hi2c->MemaddSize = MemAddSize; + hi2c->EventCount = 0U; + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferM1CpltCallback = NULL; + hi2c->hdmatx->XferM1HalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA stream */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) + { + /* Abort the ongoing DMA */ + dmaxferstatus = HAL_DMA_Abort_IT(hi2c->hdmatx); + + /* Prevent unused argument(s) compilation and MISRA warning */ + UNUSED(dmaxferstatus); + + /* Set the unused I2C DMA transfer complete callback to NULL */ + hi2c->hdmatx->XferCpltCallback = NULL; + + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + hi2c->XferSize = 0U; + hi2c->XferCount = 0U; + + /* Disable I2C peripheral to prevent dummy data in buffer */ + __HAL_I2C_DISABLE(hi2c); + + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_ERR); + + /* Enable DMA Request */ + SET_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); + + return HAL_OK; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_SIZE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Reads an amount of data in non-blocking mode with DMA from a specific memory address. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be read + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + /* Init tickstart for timeout management*/ + uint32_t tickstart = HAL_GetTick(); + __IO uint32_t count = 0U; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Wait until BUSY flag is reset */ + count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock / 25U / 1000U); + do + { + count--; + if (count == 0U) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->Devaddress = DevAddress; + hi2c->Memaddress = MemAddress; + hi2c->MemaddSize = MemAddSize; + hi2c->EventCount = 0U; + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferM1CpltCallback = NULL; + hi2c->hdmarx->XferM1HalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA stream */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) + { + /* Abort the ongoing DMA */ + dmaxferstatus = HAL_DMA_Abort_IT(hi2c->hdmarx); + + /* Prevent unused argument(s) compilation and MISRA warning */ + UNUSED(dmaxferstatus); + + /* Set the unused I2C DMA transfer complete callback to NULL */ + hi2c->hdmarx->XferCpltCallback = NULL; + + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + hi2c->XferSize = 0U; + hi2c->XferCount = 0U; + + /* Disable I2C peripheral to prevent dummy data in buffer */ + __HAL_I2C_DISABLE(hi2c); + + return HAL_ERROR; + } + + if (hi2c->XferSize == 1U) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + } + else + { + /* Enable Last DMA bit */ + SET_BIT(hi2c->Instance->CR2, I2C_CR2_LAST); + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_ERR); + + /* Enable DMA Request */ + hi2c->Instance->CR2 |= I2C_CR2_DMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Checks if target device is ready for communication. + * @note This function is used with Memory devices + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param Trials Number of trials + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout) +{ + /* Get tick */ + uint32_t tickstart = HAL_GetTick(); + uint32_t I2C_Trials = 0U; + FlagStatus tmp1; + FlagStatus tmp2; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + + do + { + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + + /* Wait until SB flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, tickstart) != HAL_OK) + { + if (READ_BIT(hi2c->Instance->CR1, I2C_CR1_START) == I2C_CR1_START) + { + hi2c->ErrorCode = HAL_I2C_WRONG_START; + } + return HAL_TIMEOUT; + } + + /* Send slave address */ + hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress); + + /* Wait until ADDR or AF flag are set */ + /* Get tick */ + tickstart = HAL_GetTick(); + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + while ((hi2c->State != HAL_I2C_STATE_TIMEOUT) && (tmp1 == RESET) && (tmp2 == RESET)) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->State = HAL_I2C_STATE_TIMEOUT; + } + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + } + + hi2c->State = HAL_I2C_STATE_READY; + + /* Check if the ADDR flag has been set */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR) == SET) + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + + /* Clear ADDR Flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + + /* Clear AF Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + } + + /* Increment Trials */ + I2C_Trials++; + } + while (I2C_Trials < Trials); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with Interrupt. + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + __IO uint32_t Prev_State = 0x00U; + __IO uint32_t count = 0x00U; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Check Busy Flag only if FIRST call of Master interface */ + if ((READ_BIT(hi2c->Instance->CR1, I2C_CR1_STOP) == I2C_CR1_STOP) || (XferOptions == I2C_FIRST_AND_LAST_FRAME) || (XferOptions == I2C_FIRST_FRAME)) + { + /* Wait until BUSY flag is reset */ + count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock / 25U / 1000U); + do + { + count--; + if (count == 0U) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->Devaddress = DevAddress; + + Prev_State = hi2c->PreviousState; + + /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((Prev_State != I2C_STATE_MASTER_BUSY_TX) || (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 1)) + { + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with DMA. + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + __IO uint32_t Prev_State = 0x00U; + __IO uint32_t count = 0x00U; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Check Busy Flag only if FIRST call of Master interface */ + if ((READ_BIT(hi2c->Instance->CR1, I2C_CR1_STOP) == I2C_CR1_STOP) || (XferOptions == I2C_FIRST_AND_LAST_FRAME) || (XferOptions == I2C_FIRST_FRAME)) + { + /* Wait until BUSY flag is reset */ + count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock / 25U / 1000U); + do + { + count--; + if (count == 0U) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->Devaddress = DevAddress; + + Prev_State = hi2c->PreviousState; + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA stream */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((Prev_State != I2C_STATE_MASTER_BUSY_TX) || (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 1)) + { + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* If XferOptions is not associated to a new frame, mean no start bit is request, enable directly the DMA request */ + /* In other cases, DMA request is enabled after Slave address treatment in IRQHandler */ + if ((XferOptions == I2C_NEXT_FRAME) || (XferOptions == I2C_LAST_FRAME) || (XferOptions == I2C_LAST_FRAME_NO_STOP)) + { + /* Enable DMA Request */ + SET_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); + } + + /* Enable EVT and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((Prev_State != I2C_STATE_MASTER_BUSY_TX) || (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 1)) + { + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + __IO uint32_t Prev_State = 0x00U; + __IO uint32_t count = 0U; + uint32_t enableIT = (I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Check Busy Flag only if FIRST call of Master interface */ + if ((READ_BIT(hi2c->Instance->CR1, I2C_CR1_STOP) == I2C_CR1_STOP) || (XferOptions == I2C_FIRST_AND_LAST_FRAME) || (XferOptions == I2C_FIRST_FRAME)) + { + /* Wait until BUSY flag is reset */ + count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock / 25U / 1000U); + do + { + count--; + if (count == 0U) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->Devaddress = DevAddress; + + Prev_State = hi2c->PreviousState; + + if ((hi2c->XferCount == 2U) && ((XferOptions == I2C_LAST_FRAME) || (XferOptions == I2C_LAST_FRAME_NO_STOP))) + { + if (Prev_State == I2C_STATE_MASTER_BUSY_RX) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Enable Pos */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + /* Remove Enabling of IT_BUF, mean RXNE treatment, treat the 2 bytes through BTF */ + enableIT &= ~I2C_IT_BUF; + } + else + { + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + } + } + else + { + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + } + + /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((Prev_State != I2C_STATE_MASTER_BUSY_RX) || (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 1)) + { + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable interrupts */ + __HAL_I2C_ENABLE_IT(hi2c, enableIT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential receive in master mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + __IO uint32_t Prev_State = 0x00U; + __IO uint32_t count = 0U; + uint32_t enableIT = (I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Check Busy Flag only if FIRST call of Master interface */ + if ((READ_BIT(hi2c->Instance->CR1, I2C_CR1_STOP) == I2C_CR1_STOP) || (XferOptions == I2C_FIRST_AND_LAST_FRAME) || (XferOptions == I2C_FIRST_FRAME)) + { + /* Wait until BUSY flag is reset */ + count = I2C_TIMEOUT_BUSY_FLAG * (SystemCoreClock / 25U / 1000U); + do + { + count--; + if (count == 0U) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET); + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + /* Clear Last DMA bit */ + CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_LAST); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->Devaddress = DevAddress; + + Prev_State = hi2c->PreviousState; + + if (hi2c->XferSize > 0U) + { + if ((hi2c->XferCount == 2U) && ((XferOptions == I2C_LAST_FRAME) || (XferOptions == I2C_LAST_FRAME_NO_STOP))) + { + if (Prev_State == I2C_STATE_MASTER_BUSY_RX) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Enable Pos */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + /* Enable Last DMA bit */ + SET_BIT(hi2c->Instance->CR2, I2C_CR2_LAST); + } + else + { + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + } + } + else + { + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + if ((XferOptions == I2C_LAST_FRAME) || (XferOptions == I2C_OTHER_AND_LAST_FRAME) || (XferOptions == I2C_LAST_FRAME_NO_STOP)) + { + /* Enable Last DMA bit */ + SET_BIT(hi2c->Instance->CR2, I2C_CR2_LAST); + } + } + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA stream */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + if (dmaxferstatus == HAL_OK) + { + /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((Prev_State != I2C_STATE_MASTER_BUSY_RX) || (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 1)) + { + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + + /* Update interrupt for only EVT and ERR */ + enableIT = (I2C_IT_EVT | I2C_IT_ERR); + } + else + { + /* Update interrupt for only ERR */ + enableIT = I2C_IT_ERR; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* If XferOptions is not associated to a new frame, mean no start bit is request, enable directly the DMA request */ + /* In other cases, DMA request is enabled after Slave address treatment in IRQHandler */ + if ((XferOptions == I2C_NEXT_FRAME) || (XferOptions == I2C_LAST_FRAME) || (XferOptions == I2C_LAST_FRAME_NO_STOP)) + { + /* Enable DMA Request */ + SET_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); + } + + /* Enable EVT and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, enableIT); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((Prev_State != I2C_STATE_MASTER_BUSY_RX) || (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 1)) + { + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable interrupts */ + __HAL_I2C_ENABLE_IT(hi2c, enableIT); + } + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in slave mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in slave mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave RX state to TX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + if ((hi2c->Instance->CR2 & I2C_CR2_DMAEN) == I2C_CR2_DMAEN) + { + /* Abort DMA Xfer if any */ + if (hi2c->hdmarx != NULL) + { + CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); + + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + if ((hi2c->Instance->CR2 & I2C_CR2_DMAEN) == I2C_CR2_DMAEN) + { + CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); + + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + else + { + /* Nothing to do */ + } + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA stream */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable EVT and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); + + /* Enable DMA Request */ + hi2c->Instance->CR2 |= I2C_CR2_DMAEN; + + return HAL_OK; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential receive in slave mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable EVT, BUF and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential receive in slave mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave RX state to TX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + if ((hi2c->Instance->CR2 & I2C_CR2_DMAEN) == I2C_CR2_DMAEN) + { + /* Abort DMA Xfer if any */ + if (hi2c->hdmarx != NULL) + { + CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); + + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + if ((hi2c->Instance->CR2 & I2C_CR2_DMAEN) == I2C_CR2_DMAEN) + { + CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); + + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + else + { + /* Nothing to do */ + } + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Disable Pos */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + + hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA stream */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Enable DMA Request */ + SET_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable EVT and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); + + return HAL_OK; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Enable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + hi2c->State = HAL_I2C_STATE_LISTEN; + + /* Check if the I2C is already enabled */ + if ((hi2c->Instance->CR1 & I2C_CR1_PE) != I2C_CR1_PE) + { + /* Enable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + } + + /* Enable Address Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Enable EVT and ERR interrupt */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp; + + /* Disable Address listen mode only if a transfer is not ongoing */ + if (hi2c->State == HAL_I2C_STATE_LISTEN) + { + tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK; + hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode); + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Disable Address Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Disable EVT and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Abort a master I2C IT or DMA process communication with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress) +{ + /* Declaration of temporary variables to prevent undefined behavior of volatile usage */ + HAL_I2C_ModeTypeDef CurrentMode = hi2c->Mode; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(DevAddress); + + /* Abort Master transfer during Receive or Transmit process */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET) && (CurrentMode == HAL_I2C_MODE_MASTER)) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_ABORT; + + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + + hi2c->XferCount = 0U; + + /* Disable EVT, BUF and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c); + + return HAL_OK; + } + else + { + /* Wrong usage of abort function */ + /* This function should be used only in case of abort monitored by master device */ + /* Or periphal is not in busy state, mean there is no active sequence to be abort */ + return HAL_ERROR; + } +} + +/** + * @} + */ + +/** @defgroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ + +/** + * @brief This function handles I2C event interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c) +{ + uint32_t sr1itflags; + uint32_t sr2itflags = 0U; + uint32_t itsources = READ_REG(hi2c->Instance->CR2); + uint32_t CurrentXferOptions = hi2c->XferOptions; + HAL_I2C_ModeTypeDef CurrentMode = hi2c->Mode; + HAL_I2C_StateTypeDef CurrentState = hi2c->State; + + /* Master or Memory mode selected */ + if ((CurrentMode == HAL_I2C_MODE_MASTER) || (CurrentMode == HAL_I2C_MODE_MEM)) + { + sr2itflags = READ_REG(hi2c->Instance->SR2); + sr1itflags = READ_REG(hi2c->Instance->SR1); + + /* Exit IRQ event until Start Bit detected in case of Other frame requested */ + if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_SB) == RESET) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(CurrentXferOptions) == 1U)) + { + return; + } + + /* SB Set ----------------------------------------------------------------*/ + if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_SB) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_EVT) != RESET)) + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + I2C_Master_SB(hi2c); + } + /* ADD10 Set -------------------------------------------------------------*/ + else if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_ADD10) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_EVT) != RESET)) + { + I2C_Master_ADD10(hi2c); + } + /* ADDR Set --------------------------------------------------------------*/ + else if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_ADDR) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_EVT) != RESET)) + { + I2C_Master_ADDR(hi2c); + } + /* I2C in mode Transmitter -----------------------------------------------*/ + else if (I2C_CHECK_FLAG(sr2itflags, I2C_FLAG_TRA) != RESET) + { + /* Do not check buffer and BTF flag if a Xfer DMA is on going */ + if (READ_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN) != I2C_CR2_DMAEN) + { + /* TXE set and BTF reset -----------------------------------------------*/ + if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_TXE) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_BUF) != RESET) && (I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_BTF) == RESET)) + { + I2C_MasterTransmit_TXE(hi2c); + } + /* BTF set -------------------------------------------------------------*/ + else if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_BTF) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_EVT) != RESET)) + { + if (CurrentState == HAL_I2C_STATE_BUSY_TX) + { + I2C_MasterTransmit_BTF(hi2c); + } + else /* HAL_I2C_MODE_MEM */ + { + if (CurrentMode == HAL_I2C_MODE_MEM) + { + I2C_MemoryTransmit_TXE_BTF(hi2c); + } + } + } + else + { + /* Do nothing */ + } + } + } + /* I2C in mode Receiver --------------------------------------------------*/ + else + { + /* Do not check buffer and BTF flag if a Xfer DMA is on going */ + if (READ_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN) != I2C_CR2_DMAEN) + { + /* RXNE set and BTF reset -----------------------------------------------*/ + if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_RXNE) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_BUF) != RESET) && (I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_BTF) == RESET)) + { + I2C_MasterReceive_RXNE(hi2c); + } + /* BTF set -------------------------------------------------------------*/ + else if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_BTF) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_EVT) != RESET)) + { + I2C_MasterReceive_BTF(hi2c); + } + else + { + /* Do nothing */ + } + } + } + } + /* Slave mode selected */ + else + { + /* If an error is detected, read only SR1 register to prevent */ + /* a clear of ADDR flags by reading SR2 after reading SR1 in Error treatment */ + if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE) + { + sr1itflags = READ_REG(hi2c->Instance->SR1); + } + else + { + sr2itflags = READ_REG(hi2c->Instance->SR2); + sr1itflags = READ_REG(hi2c->Instance->SR1); + } + + /* ADDR set --------------------------------------------------------------*/ + if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_ADDR) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_EVT) != RESET)) + { + /* Now time to read SR2, this will clear ADDR flag automatically */ + if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE) + { + sr2itflags = READ_REG(hi2c->Instance->SR2); + } + I2C_Slave_ADDR(hi2c, sr2itflags); + } + /* STOPF set --------------------------------------------------------------*/ + else if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_EVT) != RESET)) + { + I2C_Slave_STOPF(hi2c); + } + /* I2C in mode Transmitter -----------------------------------------------*/ + else if ((CurrentState == HAL_I2C_STATE_BUSY_TX) || (CurrentState == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + /* TXE set and BTF reset -----------------------------------------------*/ + if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_TXE) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_BUF) != RESET) && (I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_BTF) == RESET)) + { + I2C_SlaveTransmit_TXE(hi2c); + } + /* BTF set -------------------------------------------------------------*/ + else if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_BTF) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_EVT) != RESET)) + { + I2C_SlaveTransmit_BTF(hi2c); + } + else + { + /* Do nothing */ + } + } + /* I2C in mode Receiver --------------------------------------------------*/ + else + { + /* RXNE set and BTF reset ----------------------------------------------*/ + if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_RXNE) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_BUF) != RESET) && (I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_BTF) == RESET)) + { + I2C_SlaveReceive_RXNE(hi2c); + } + /* BTF set -------------------------------------------------------------*/ + else if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_BTF) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_EVT) != RESET)) + { + I2C_SlaveReceive_BTF(hi2c); + } + else + { + /* Do nothing */ + } + } + } +} + +/** + * @brief This function handles I2C error interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c) +{ + HAL_I2C_ModeTypeDef tmp1; + uint32_t tmp2; + HAL_I2C_StateTypeDef tmp3; + uint32_t tmp4; + uint32_t sr1itflags = READ_REG(hi2c->Instance->SR1); + uint32_t itsources = READ_REG(hi2c->Instance->CR2); + uint32_t error = HAL_I2C_ERROR_NONE; + HAL_I2C_ModeTypeDef CurrentMode = hi2c->Mode; + + /* I2C Bus error interrupt occurred ----------------------------------------*/ + if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_BERR) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERR) != RESET)) + { + error |= HAL_I2C_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); + } + + /* I2C Arbitration Lost error interrupt occurred ---------------------------*/ + if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_ARLO) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERR) != RESET)) + { + error |= HAL_I2C_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); + } + + /* I2C Acknowledge failure error interrupt occurred ------------------------*/ + if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERR) != RESET)) + { + tmp1 = CurrentMode; + tmp2 = hi2c->XferCount; + tmp3 = hi2c->State; + tmp4 = hi2c->PreviousState; + if ((tmp1 == HAL_I2C_MODE_SLAVE) && (tmp2 == 0U) && \ + ((tmp3 == HAL_I2C_STATE_BUSY_TX) || (tmp3 == HAL_I2C_STATE_BUSY_TX_LISTEN) || \ + ((tmp3 == HAL_I2C_STATE_LISTEN) && (tmp4 == I2C_STATE_SLAVE_BUSY_TX)))) + { + I2C_Slave_AF(hi2c); + } + else + { + /* Clear AF flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + error |= HAL_I2C_ERROR_AF; + + /* Do not generate a STOP in case of Slave receive non acknowledge during transfer (mean not at the end of transfer) */ + if ((CurrentMode == HAL_I2C_MODE_MASTER) || (CurrentMode == HAL_I2C_MODE_MEM)) + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + } + } + } + + /* I2C Over-Run/Under-Run interrupt occurred -------------------------------*/ + if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_OVR) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERR) != RESET)) + { + error |= HAL_I2C_ERROR_OVR; + /* Clear OVR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); + } + + /* Call the Error Callback in case of Error detected -----------------------*/ + if (error != HAL_I2C_ERROR_NONE) + { + hi2c->ErrorCode |= error; + I2C_ITError(hi2c); + } +} + +/** + * @brief Master Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Master Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterRxCpltCallback could be implemented in the user file + */ +} + +/** @brief Slave Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Slave Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Slave Address Match callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param TransferDirection Master request Transfer Direction (Write/Read), value of @ref I2C_XferDirection_definition + * @param AddrMatchCode Address Match Code + * @retval None + */ +__weak void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + UNUSED(TransferDirection); + UNUSED(AddrMatchCode); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AddrCallback() could be implemented in the user file + */ +} + +/** + * @brief Listen Complete callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ListenCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief Memory Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Memory Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief I2C error callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief I2C abort callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AbortCpltCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions + * @brief Peripheral State, Mode and Error functions + * +@verbatim + =============================================================================== + ##### Peripheral State, Mode and Error functions ##### + =============================================================================== + [..] + This subsection permit to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the I2C handle state. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL state + */ +HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c) +{ + /* Return I2C handle state */ + return hi2c->State; +} + +/** + * @brief Returns the I2C Master, Slave, Memory or no mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL mode + */ +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c) +{ + return hi2c->Mode; +} + +/** + * @brief Return the I2C error code. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval I2C Error Code + */ +uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c) +{ + return hi2c->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup I2C_Private_Functions + * @{ + */ + +/** + * @brief Handle TXE flag for Master + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval None + */ +static void I2C_MasterTransmit_TXE(I2C_HandleTypeDef *hi2c) +{ + /* Declaration of temporary variables to prevent undefined behavior of volatile usage */ + HAL_I2C_StateTypeDef CurrentState = hi2c->State; + HAL_I2C_ModeTypeDef CurrentMode = hi2c->Mode; + uint32_t CurrentXferOptions = hi2c->XferOptions; + + if ((hi2c->XferSize == 0U) && (CurrentState == HAL_I2C_STATE_BUSY_TX)) + { + /* Call TxCpltCallback() directly if no stop mode is set */ + if ((CurrentXferOptions != I2C_FIRST_AND_LAST_FRAME) && (CurrentXferOptions != I2C_LAST_FRAME) && (CurrentXferOptions != I2C_NO_OPTION_FRAME)) + { + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else /* Generate Stop condition then Call TxCpltCallback() */ + { + /* Disable EVT, BUF and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemTxCpltCallback(hi2c); +#else + HAL_I2C_MemTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + } + else if ((CurrentState == HAL_I2C_STATE_BUSY_TX) || \ + ((CurrentMode == HAL_I2C_MODE_MEM) && (CurrentState == HAL_I2C_STATE_BUSY_RX))) + { + if (hi2c->XferCount == 0U) + { + /* Disable BUF interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF); + } + else + { + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + I2C_MemoryTransmit_TXE_BTF(hi2c); + } + else + { + /* Write data to DR */ + hi2c->Instance->DR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferCount--; + } + } + } + else + { + /* Do nothing */ + } +} + +/** + * @brief Handle BTF flag for Master transmitter + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval None + */ +static void I2C_MasterTransmit_BTF(I2C_HandleTypeDef *hi2c) +{ + /* Declaration of temporary variables to prevent undefined behavior of volatile usage */ + uint32_t CurrentXferOptions = hi2c->XferOptions; + + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + if (hi2c->XferCount != 0U) + { + /* Write data to DR */ + hi2c->Instance->DR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferCount--; + } + else + { + /* Call TxCpltCallback() directly if no stop mode is set */ + if ((CurrentXferOptions != I2C_FIRST_AND_LAST_FRAME) && (CurrentXferOptions != I2C_LAST_FRAME) && (CurrentXferOptions != I2C_NO_OPTION_FRAME)) + { + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else /* Generate Stop condition then Call TxCpltCallback() */ + { + /* Disable EVT, BUF and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemTxCpltCallback(hi2c); +#else + HAL_I2C_MemTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + } + } + else + { + /* Do nothing */ + } +} + +/** + * @brief Handle TXE and BTF flag for Memory transmitter + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval None + */ +static void I2C_MemoryTransmit_TXE_BTF(I2C_HandleTypeDef *hi2c) +{ + /* Declaration of temporary variables to prevent undefined behavior of volatile usage */ + HAL_I2C_StateTypeDef CurrentState = hi2c->State; + + if (hi2c->EventCount == 0U) + { + /* If Memory address size is 8Bit */ + if (hi2c->MemaddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->DR = I2C_MEM_ADD_LSB(hi2c->Memaddress); + + hi2c->EventCount += 2U; + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->DR = I2C_MEM_ADD_MSB(hi2c->Memaddress); + + hi2c->EventCount++; + } + } + else if (hi2c->EventCount == 1U) + { + /* Send LSB of Memory Address */ + hi2c->Instance->DR = I2C_MEM_ADD_LSB(hi2c->Memaddress); + + hi2c->EventCount++; + } + else if (hi2c->EventCount == 2U) + { + if (CurrentState == HAL_I2C_STATE_BUSY_RX) + { + /* Generate Restart */ + hi2c->Instance->CR1 |= I2C_CR1_START; + + hi2c->EventCount++; + } + else if ((hi2c->XferCount > 0U) && (CurrentState == HAL_I2C_STATE_BUSY_TX)) + { + /* Write data to DR */ + hi2c->Instance->DR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferCount--; + } + else if ((hi2c->XferCount == 0U) && (CurrentState == HAL_I2C_STATE_BUSY_TX)) + { + /* Generate Stop condition then Call TxCpltCallback() */ + /* Disable EVT, BUF and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemTxCpltCallback(hi2c); +#else + HAL_I2C_MemTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + /* Do nothing */ + } + } + else + { + /* Do nothing */ + } +} + +/** + * @brief Handle RXNE flag for Master + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval None + */ +static void I2C_MasterReceive_RXNE(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + uint32_t tmp; + + tmp = hi2c->XferCount; + if (tmp > 3U) + { + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferCount--; + + if (hi2c->XferCount == (uint16_t)3) + { + /* Disable BUF interrupt, this help to treat correctly the last 4 bytes + on BTF subroutine */ + /* Disable BUF interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF); + } + } + else if ((hi2c->XferOptions != I2C_FIRST_AND_NEXT_FRAME) && ((tmp == 1U) || (tmp == 0U))) + { + if (I2C_WaitOnSTOPRequestThroughIT(hi2c) == HAL_OK) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Disable EVT, BUF and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferCount--; + + hi2c->State = HAL_I2C_STATE_READY; + + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->PreviousState = I2C_STATE_NONE; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemRxCpltCallback(hi2c); +#else + HAL_I2C_MemRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterRxCpltCallback(hi2c); +#else + HAL_I2C_MasterRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + else + { + /* Disable EVT, BUF and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferCount--; + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Call user error callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ErrorCallback(hi2c); +#else + HAL_I2C_ErrorCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + else + { + /* Disable BUF interrupt, this help to treat correctly the last 2 bytes + on BTF subroutine if there is a reception delay between N-1 and N byte */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF); + } + } +} + +/** + * @brief Handle BTF flag for Master receiver + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval None + */ +static void I2C_MasterReceive_BTF(I2C_HandleTypeDef *hi2c) +{ + /* Declaration of temporary variables to prevent undefined behavior of volatile usage */ + uint32_t CurrentXferOptions = hi2c->XferOptions; + + if (hi2c->XferCount == 4U) + { + /* Disable BUF interrupt, this help to treat correctly the last 2 bytes + on BTF subroutine if there is a reception delay between N-1 and N byte */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF); + + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferCount--; + } + else if (hi2c->XferCount == 3U) + { + /* Disable BUF interrupt, this help to treat correctly the last 2 bytes + on BTF subroutine if there is a reception delay between N-1 and N byte */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF); + + if ((CurrentXferOptions != I2C_NEXT_FRAME) && (CurrentXferOptions != I2C_FIRST_AND_NEXT_FRAME)) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + } + + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferCount--; + } + else if (hi2c->XferCount == 2U) + { + /* Prepare next transfer or stop current transfer */ + if ((CurrentXferOptions == I2C_FIRST_FRAME) || (CurrentXferOptions == I2C_LAST_FRAME_NO_STOP)) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + } + else if ((CurrentXferOptions == I2C_NEXT_FRAME) || (CurrentXferOptions == I2C_FIRST_AND_NEXT_FRAME)) + { + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + } + else if (CurrentXferOptions != I2C_LAST_FRAME_NO_STOP) + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + } + else + { + /* Do nothing */ + } + + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferCount--; + + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferCount--; + + /* Disable EVT and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); + + hi2c->State = HAL_I2C_STATE_READY; + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->PreviousState = I2C_STATE_NONE; +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemRxCpltCallback(hi2c); +#else + HAL_I2C_MemRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterRxCpltCallback(hi2c); +#else + HAL_I2C_MasterRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + else + { + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferCount--; + } +} + +/** + * @brief Handle SB flag for Master + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval None + */ +static void I2C_Master_SB(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + if (hi2c->EventCount == 0U) + { + /* Send slave address */ + hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(hi2c->Devaddress); + } + else + { + hi2c->Instance->DR = I2C_7BIT_ADD_READ(hi2c->Devaddress); + } + } + else + { + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) + { + /* Send slave 7 Bits address */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(hi2c->Devaddress); + } + else + { + hi2c->Instance->DR = I2C_7BIT_ADD_READ(hi2c->Devaddress); + } + + if (((hi2c->hdmatx != NULL) && (hi2c->hdmatx->XferCpltCallback != NULL)) + || ((hi2c->hdmarx != NULL) && (hi2c->hdmarx->XferCpltCallback != NULL))) + { + /* Enable DMA Request */ + SET_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); + } + } + else + { + if (hi2c->EventCount == 0U) + { + /* Send header of slave address */ + hi2c->Instance->DR = I2C_10BIT_HEADER_WRITE(hi2c->Devaddress); + } + else if (hi2c->EventCount == 1U) + { + /* Send header of slave address */ + hi2c->Instance->DR = I2C_10BIT_HEADER_READ(hi2c->Devaddress); + } + else + { + /* Do nothing */ + } + } + } +} + +/** + * @brief Handle ADD10 flag for Master + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval None + */ +static void I2C_Master_ADD10(I2C_HandleTypeDef *hi2c) +{ + /* Send slave address */ + hi2c->Instance->DR = I2C_10BIT_ADDRESS(hi2c->Devaddress); + + if (((hi2c->hdmatx != NULL) && (hi2c->hdmatx->XferCpltCallback != NULL)) + || ((hi2c->hdmarx != NULL) && (hi2c->hdmarx->XferCpltCallback != NULL))) + { + /* Enable DMA Request */ + SET_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); + } +} + +/** + * @brief Handle ADDR flag for Master + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval None + */ +static void I2C_Master_ADDR(I2C_HandleTypeDef *hi2c) +{ + /* Declaration of temporary variable to prevent undefined behavior of volatile usage */ + HAL_I2C_ModeTypeDef CurrentMode = hi2c->Mode; + uint32_t CurrentXferOptions = hi2c->XferOptions; + uint32_t Prev_State = hi2c->PreviousState; + + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + if ((hi2c->EventCount == 0U) && (CurrentMode == HAL_I2C_MODE_MEM)) + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + else if ((hi2c->EventCount == 0U) && (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)) + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Generate Restart */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + + hi2c->EventCount++; + } + else + { + if (hi2c->XferCount == 0U) + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + } + else if (hi2c->XferCount == 1U) + { + if (CurrentXferOptions == I2C_NO_OPTION_FRAME) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + if ((hi2c->Instance->CR2 & I2C_CR2_DMAEN) == I2C_CR2_DMAEN) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + else + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + } + } + /* Prepare next transfer or stop current transfer */ + else if ((CurrentXferOptions != I2C_FIRST_AND_LAST_FRAME) && (CurrentXferOptions != I2C_LAST_FRAME) \ + && ((Prev_State != I2C_STATE_MASTER_BUSY_RX) || (CurrentXferOptions == I2C_FIRST_FRAME))) + { + if ((CurrentXferOptions != I2C_NEXT_FRAME) && (CurrentXferOptions != I2C_FIRST_AND_NEXT_FRAME) && (CurrentXferOptions != I2C_LAST_FRAME_NO_STOP)) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + } + else + { + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + else + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + } + } + else if (hi2c->XferCount == 2U) + { + if ((CurrentXferOptions != I2C_NEXT_FRAME) && (CurrentXferOptions != I2C_FIRST_AND_NEXT_FRAME) && (CurrentXferOptions != I2C_LAST_FRAME_NO_STOP)) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Enable Pos */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_POS); + } + else + { + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + } + + if (((hi2c->Instance->CR2 & I2C_CR2_DMAEN) == I2C_CR2_DMAEN) && ((CurrentXferOptions == I2C_NO_OPTION_FRAME) || (CurrentXferOptions == I2C_FIRST_FRAME) || (CurrentXferOptions == I2C_FIRST_AND_LAST_FRAME) || (CurrentXferOptions == I2C_LAST_FRAME_NO_STOP) || (CurrentXferOptions == I2C_LAST_FRAME))) + { + /* Enable Last DMA bit */ + SET_BIT(hi2c->Instance->CR2, I2C_CR2_LAST); + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + else + { + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + if (((hi2c->Instance->CR2 & I2C_CR2_DMAEN) == I2C_CR2_DMAEN) && ((CurrentXferOptions == I2C_NO_OPTION_FRAME) || (CurrentXferOptions == I2C_FIRST_FRAME) || (CurrentXferOptions == I2C_FIRST_AND_LAST_FRAME) || (CurrentXferOptions == I2C_LAST_FRAME_NO_STOP) || (CurrentXferOptions == I2C_LAST_FRAME))) + { + /* Enable Last DMA bit */ + SET_BIT(hi2c->Instance->CR2, I2C_CR2_LAST); + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } + + /* Reset Event counter */ + hi2c->EventCount = 0U; + } + } + else + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + } +} + +/** + * @brief Handle TXE flag for Slave + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval None + */ +static void I2C_SlaveTransmit_TXE(I2C_HandleTypeDef *hi2c) +{ + /* Declaration of temporary variables to prevent undefined behavior of volatile usage */ + HAL_I2C_StateTypeDef CurrentState = hi2c->State; + + if (hi2c->XferCount != 0U) + { + /* Write data to DR */ + hi2c->Instance->DR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferCount--; + + if ((hi2c->XferCount == 0U) && (CurrentState == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + /* Last Byte is received, disable Interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF); + + /* Set state at HAL_I2C_STATE_LISTEN */ + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + hi2c->State = HAL_I2C_STATE_LISTEN; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveTxCpltCallback(hi2c); +#else + HAL_I2C_SlaveTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief Handle BTF flag for Slave transmitter + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval None + */ +static void I2C_SlaveTransmit_BTF(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->XferCount != 0U) + { + /* Write data to DR */ + hi2c->Instance->DR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferCount--; + } +} + +/** + * @brief Handle RXNE flag for Slave + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval None + */ +static void I2C_SlaveReceive_RXNE(I2C_HandleTypeDef *hi2c) +{ + /* Declaration of temporary variables to prevent undefined behavior of volatile usage */ + HAL_I2C_StateTypeDef CurrentState = hi2c->State; + + if (hi2c->XferCount != 0U) + { + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferCount--; + + if ((hi2c->XferCount == 0U) && (CurrentState == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + /* Last Byte is received, disable Interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF); + + /* Set state at HAL_I2C_STATE_LISTEN */ + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + hi2c->State = HAL_I2C_STATE_LISTEN; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief Handle BTF flag for Slave receiver + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval None + */ +static void I2C_SlaveReceive_BTF(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->XferCount != 0U) + { + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferCount--; + } +} + +/** + * @brief Handle ADD flag for Slave + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param IT2Flags Interrupt2 flags to handle. + * @retval None + */ +static void I2C_Slave_ADDR(I2C_HandleTypeDef *hi2c, uint32_t IT2Flags) +{ + uint8_t TransferDirection = I2C_DIRECTION_RECEIVE; + uint16_t SlaveAddrCode; + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + /* Disable BUF interrupt, BUF enabling is manage through slave specific interface */ + __HAL_I2C_DISABLE_IT(hi2c, (I2C_IT_BUF)); + + /* Transfer Direction requested by Master */ + if (I2C_CHECK_FLAG(IT2Flags, I2C_FLAG_TRA) == RESET) + { + TransferDirection = I2C_DIRECTION_TRANSMIT; + } + + if (I2C_CHECK_FLAG(IT2Flags, I2C_FLAG_DUALF) == RESET) + { + SlaveAddrCode = (uint16_t)hi2c->Init.OwnAddress1; + } + else + { + SlaveAddrCode = (uint16_t)hi2c->Init.OwnAddress2; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, TransferDirection, SlaveAddrCode); +#else + HAL_I2C_AddrCallback(hi2c, TransferDirection, SlaveAddrCode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + } +} + +/** + * @brief Handle STOPF flag for Slave + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval None + */ +static void I2C_Slave_STOPF(I2C_HandleTypeDef *hi2c) +{ + /* Declaration of temporary variable to prevent undefined behavior of volatile usage */ + HAL_I2C_StateTypeDef CurrentState = hi2c->State; + + /* Disable EVT, BUF and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + /* Clear STOPF flag */ + __HAL_I2C_CLEAR_STOPFLAG(hi2c); + + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* If a DMA is ongoing, Update handle size context */ + if ((hi2c->Instance->CR2 & I2C_CR2_DMAEN) == I2C_CR2_DMAEN) + { + if ((CurrentState == HAL_I2C_STATE_BUSY_RX) || (CurrentState == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + hi2c->XferCount = (uint16_t)(__HAL_DMA_GET_COUNTER(hi2c->hdmarx)); + + if (hi2c->XferCount != 0U) + { + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + /* Disable, stop the current DMA */ + CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); + + /* Abort DMA Xfer if any */ + if (HAL_DMA_GetState(hi2c->hdmarx) != HAL_DMA_STATE_READY) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + else + { + hi2c->XferCount = (uint16_t)(__HAL_DMA_GET_COUNTER(hi2c->hdmatx)); + + if (hi2c->XferCount != 0U) + { + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + /* Disable, stop the current DMA */ + CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); + + /* Abort DMA Xfer if any */ + if (HAL_DMA_GetState(hi2c->hdmatx) != HAL_DMA_STATE_READY) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + + /* All data are not transferred, so set error code accordingly */ + if (hi2c->XferCount != 0U) + { + /* Store Last receive data if any */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) + { + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferCount--; + } + + /* Store Last receive data if any */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) + { + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + /* Update counter */ + hi2c->XferCount--; + } + + if (hi2c->XferCount != 0U) + { + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + } + + if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c); + } + else + { + if (CurrentState == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Set state at HAL_I2C_STATE_LISTEN */ + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_LISTEN; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + if (hi2c->State == HAL_I2C_STATE_LISTEN) + { + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ListenCpltCallback(hi2c); +#else + HAL_I2C_ListenCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + if ((hi2c->PreviousState == I2C_STATE_SLAVE_BUSY_RX) || (CurrentState == HAL_I2C_STATE_BUSY_RX)) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + } +} + +/** + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval None + */ +static void I2C_Slave_AF(I2C_HandleTypeDef *hi2c) +{ + /* Declaration of temporary variables to prevent undefined behavior of volatile usage */ + HAL_I2C_StateTypeDef CurrentState = hi2c->State; + uint32_t CurrentXferOptions = hi2c->XferOptions; + + if (((CurrentXferOptions == I2C_FIRST_AND_LAST_FRAME) || (CurrentXferOptions == I2C_LAST_FRAME)) && \ + (CurrentState == HAL_I2C_STATE_LISTEN)) + { + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + + /* Disable EVT, BUF and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + /* Clear AF flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ListenCpltCallback(hi2c); +#else + HAL_I2C_ListenCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else if (CurrentState == HAL_I2C_STATE_BUSY_TX) + { + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Disable EVT, BUF and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + + /* Clear AF flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveTxCpltCallback(hi2c); +#else + HAL_I2C_SlaveTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + /* Clear AF flag only */ + /* State Listen, but XferOptions == FIRST or NEXT */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } +} + +/** + * @brief I2C interrupts error process + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ITError(I2C_HandleTypeDef *hi2c) +{ + /* Declaration of temporary variable to prevent undefined behavior of volatile usage */ + HAL_I2C_StateTypeDef CurrentState = hi2c->State; + HAL_I2C_ModeTypeDef CurrentMode = hi2c->Mode; + uint32_t CurrentError; + + if (((CurrentMode == HAL_I2C_MODE_MASTER) || (CurrentMode == HAL_I2C_MODE_MEM)) && (CurrentState == HAL_I2C_STATE_BUSY_RX)) + { + /* Disable Pos bit in I2C CR1 when error occurred in Master/Mem Receive IT Process */ + hi2c->Instance->CR1 &= ~I2C_CR1_POS; + } + + if (((uint32_t)CurrentState & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + /* keep HAL_I2C_STATE_LISTEN */ + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_LISTEN; + } + else + { + /* If state is an abort treatment on going, don't change state */ + /* This change will be do later */ + if ((READ_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN) != I2C_CR2_DMAEN) && (CurrentState != HAL_I2C_STATE_ABORT)) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + } + hi2c->PreviousState = I2C_STATE_NONE; + } + + /* Abort DMA transfer */ + if (READ_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN) == I2C_CR2_DMAEN) + { + hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN; + + if (hi2c->hdmatx->State != HAL_DMA_STATE_READY) + { + /* Set the DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Disable I2C peripheral to prevent dummy data in buffer */ + __HAL_I2C_DISABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + else + { + /* Set the DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Store Last receive data if any */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) + { + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + } + + /* Disable I2C peripheral to prevent dummy data in buffer */ + __HAL_I2C_DISABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Call Directly hi2c->hdmarx->XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + else if (hi2c->State == HAL_I2C_STATE_ABORT) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Store Last receive data if any */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) + { + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + } + + /* Disable I2C peripheral to prevent dummy data in buffer */ + __HAL_I2C_DISABLE(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AbortCpltCallback(hi2c); +#else + HAL_I2C_AbortCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + /* Store Last receive data if any */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) + { + /* Read data from DR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->DR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + } + + /* Call user error callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ErrorCallback(hi2c); +#else + HAL_I2C_ErrorCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + /* STOP Flag is not set after a NACK reception, BusError, ArbitrationLost, OverRun */ + CurrentError = hi2c->ErrorCode; + + if (((CurrentError & HAL_I2C_ERROR_BERR) == HAL_I2C_ERROR_BERR) || \ + ((CurrentError & HAL_I2C_ERROR_ARLO) == HAL_I2C_ERROR_ARLO) || \ + ((CurrentError & HAL_I2C_ERROR_AF) == HAL_I2C_ERROR_AF) || \ + ((CurrentError & HAL_I2C_ERROR_OVR) == HAL_I2C_ERROR_OVR)) + { + /* Disable EVT, BUF and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR); + } + + /* So may inform upper layer that listen phase is stopped */ + /* during NACK error treatment */ + CurrentState = hi2c->State; + if (((hi2c->ErrorCode & HAL_I2C_ERROR_AF) == HAL_I2C_ERROR_AF) && (CurrentState == HAL_I2C_STATE_LISTEN)) + { + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ListenCpltCallback(hi2c); +#else + HAL_I2C_ListenCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_MasterRequestWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout, uint32_t Tickstart) +{ + /* Declaration of temporary variable to prevent undefined behavior of volatile usage */ + uint32_t CurrentXferOptions = hi2c->XferOptions; + + /* Generate Start condition if first transfer */ + if ((CurrentXferOptions == I2C_FIRST_AND_LAST_FRAME) || (CurrentXferOptions == I2C_FIRST_FRAME) || (CurrentXferOptions == I2C_NO_OPTION_FRAME)) + { + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + } + else if (hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) + { + /* Generate ReStart */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + } + else + { + /* Do nothing */ + } + + /* Wait until SB flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK) + { + if (READ_BIT(hi2c->Instance->CR1, I2C_CR1_START) == I2C_CR1_START) + { + hi2c->ErrorCode = HAL_I2C_WRONG_START; + } + return HAL_TIMEOUT; + } + + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) + { + /* Send slave address */ + hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress); + } + else + { + /* Send header of slave address */ + hi2c->Instance->DR = I2C_10BIT_HEADER_WRITE(DevAddress); + + /* Wait until ADD10 flag is set */ + if (I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADD10, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Send slave address */ + hi2c->Instance->DR = I2C_10BIT_ADDRESS(DevAddress); + } + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Master sends target device address for read request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_MasterRequestRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout, uint32_t Tickstart) +{ + /* Declaration of temporary variable to prevent undefined behavior of volatile usage */ + uint32_t CurrentXferOptions = hi2c->XferOptions; + + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Generate Start condition if first transfer */ + if ((CurrentXferOptions == I2C_FIRST_AND_LAST_FRAME) || (CurrentXferOptions == I2C_FIRST_FRAME) || (CurrentXferOptions == I2C_NO_OPTION_FRAME)) + { + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + } + else if (hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) + { + /* Generate ReStart */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + } + else + { + /* Do nothing */ + } + + /* Wait until SB flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK) + { + if (READ_BIT(hi2c->Instance->CR1, I2C_CR1_START) == I2C_CR1_START) + { + hi2c->ErrorCode = HAL_I2C_WRONG_START; + } + return HAL_TIMEOUT; + } + + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) + { + /* Send slave address */ + hi2c->Instance->DR = I2C_7BIT_ADD_READ(DevAddress); + } + else + { + /* Send header of slave address */ + hi2c->Instance->DR = I2C_10BIT_HEADER_WRITE(DevAddress); + + /* Wait until ADD10 flag is set */ + if (I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADD10, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Send slave address */ + hi2c->Instance->DR = I2C_10BIT_ADDRESS(DevAddress); + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Generate Restart */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + + /* Wait until SB flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK) + { + if (READ_BIT(hi2c->Instance->CR1, I2C_CR1_START) == I2C_CR1_START) + { + hi2c->ErrorCode = HAL_I2C_WRONG_START; + } + return HAL_TIMEOUT; + } + + /* Send header of slave address */ + hi2c->Instance->DR = I2C_10BIT_HEADER_READ(DevAddress); + } + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for write request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart) +{ + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + + /* Wait until SB flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK) + { + if (READ_BIT(hi2c->Instance->CR1, I2C_CR1_START) == I2C_CR1_START) + { + hi2c->ErrorCode = HAL_I2C_WRONG_START; + } + return HAL_TIMEOUT; + } + + /* Send slave address */ + hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress); + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Wait until TXE flag is set */ + if (I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + } + return HAL_ERROR; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->DR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXE flag is set */ + if (I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + } + return HAL_ERROR; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress); + } + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for read request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart) +{ + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* Generate Start */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + + /* Wait until SB flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK) + { + if (READ_BIT(hi2c->Instance->CR1, I2C_CR1_START) == I2C_CR1_START) + { + hi2c->ErrorCode = HAL_I2C_WRONG_START; + } + return HAL_TIMEOUT; + } + + /* Send slave address */ + hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress); + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_ADDRFLAG(hi2c); + + /* Wait until TXE flag is set */ + if (I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + } + return HAL_ERROR; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->DR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXE flag is set */ + if (I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + } + return HAL_ERROR; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress); + } + + /* Wait until TXE flag is set */ + if (I2C_WaitOnTXEFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + } + return HAL_ERROR; + } + + /* Generate Restart */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_START); + + /* Wait until SB flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout, Tickstart) != HAL_OK) + { + if (READ_BIT(hi2c->Instance->CR1, I2C_CR1_START) == I2C_CR1_START) + { + hi2c->ErrorCode = HAL_I2C_WRONG_START; + } + return HAL_TIMEOUT; + } + + /* Send slave address */ + hi2c->Instance->DR = I2C_7BIT_ADD_READ(DevAddress); + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief DMA I2C process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAXferCplt(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ + + /* Declaration of temporary variable to prevent undefined behavior of volatile usage */ + HAL_I2C_StateTypeDef CurrentState = hi2c->State; + HAL_I2C_ModeTypeDef CurrentMode = hi2c->Mode; + uint32_t CurrentXferOptions = hi2c->XferOptions; + + /* Disable EVT and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); + + /* Clear Complete callback */ + if (hi2c->hdmatx != NULL) + { + hi2c->hdmatx->XferCpltCallback = NULL; + } + if (hi2c->hdmarx != NULL) + { + hi2c->hdmarx->XferCpltCallback = NULL; + } + + if ((((uint32_t)CurrentState & (uint32_t)HAL_I2C_STATE_BUSY_TX) == (uint32_t)HAL_I2C_STATE_BUSY_TX) || ((((uint32_t)CurrentState & (uint32_t)HAL_I2C_STATE_BUSY_RX) == (uint32_t)HAL_I2C_STATE_BUSY_RX) && (CurrentMode == HAL_I2C_MODE_SLAVE))) + { + /* Disable DMA Request */ + CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); + + hi2c->XferCount = 0U; + + if (CurrentState == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Set state at HAL_I2C_STATE_LISTEN */ + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + hi2c->State = HAL_I2C_STATE_LISTEN; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveTxCpltCallback(hi2c); +#else + HAL_I2C_SlaveTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else if (CurrentState == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Set state at HAL_I2C_STATE_LISTEN */ + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + hi2c->State = HAL_I2C_STATE_LISTEN; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + /* Do nothing */ + } + + /* Enable EVT and ERR interrupt to treat end of transfer in IRQ handler */ + __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); + } + /* Check current Mode, in case of treatment DMA handler have been preempted by a prior interrupt */ + else if (hi2c->Mode != HAL_I2C_MODE_NONE) + { + if (hi2c->XferCount == (uint16_t)1) + { + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + } + + /* Disable EVT and ERR interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR); + + /* Prepare next transfer or stop current transfer */ + if ((CurrentXferOptions == I2C_NO_OPTION_FRAME) || (CurrentXferOptions == I2C_FIRST_AND_LAST_FRAME) || (CurrentXferOptions == I2C_OTHER_AND_LAST_FRAME) || (CurrentXferOptions == I2C_LAST_FRAME)) + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + } + + /* Disable Last DMA */ + CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_LAST); + + /* Disable DMA Request */ + CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN); + + hi2c->XferCount = 0U; + + /* Check if Errors has been detected during transfer */ + if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE) + { +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ErrorCallback(hi2c); +#else + HAL_I2C_ErrorCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->State = HAL_I2C_STATE_READY; + + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->PreviousState = I2C_STATE_NONE; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemRxCpltCallback(hi2c); +#else + HAL_I2C_MemRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterRxCpltCallback(hi2c); +#else + HAL_I2C_MasterRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + } + else + { + /* Do nothing */ + } +} + +/** + * @brief DMA I2C communication error callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAError(DMA_HandleTypeDef *hdma) +{ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ + + /* Clear Complete callback */ + if (hi2c->hdmatx != NULL) + { + hi2c->hdmatx->XferCpltCallback = NULL; + } + if (hi2c->hdmarx != NULL) + { + hi2c->hdmarx->XferCpltCallback = NULL; + } + + /* Ignore DMA FIFO error */ + if (HAL_DMA_GetError(hdma) != HAL_DMA_ERROR_FE) + { + /* Disable Acknowledge */ + hi2c->Instance->CR1 &= ~I2C_CR1_ACK; + + hi2c->XferCount = 0U; + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ErrorCallback(hi2c); +#else + HAL_I2C_ErrorCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA I2C communication abort callback + * (To be called at end of DMA Abort procedure). + * @param hdma DMA handle. + * @retval None + */ +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma) +{ + __IO uint32_t count = 0U; + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ + + /* Declaration of temporary variable to prevent undefined behavior of volatile usage */ + HAL_I2C_StateTypeDef CurrentState = hi2c->State; + + /* During abort treatment, check that there is no pending STOP request */ + /* Wait until STOP flag is reset */ + count = I2C_TIMEOUT_FLAG * (SystemCoreClock / 25U / 1000U); + do + { + if (count == 0U) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + break; + } + count--; + } + while (READ_BIT(hi2c->Instance->CR1, I2C_CR1_STOP) == I2C_CR1_STOP); + + /* Clear Complete callback */ + if (hi2c->hdmatx != NULL) + { + hi2c->hdmatx->XferCpltCallback = NULL; + } + if (hi2c->hdmarx != NULL) + { + hi2c->hdmarx->XferCpltCallback = NULL; + } + + /* Disable Acknowledge */ + CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + hi2c->XferCount = 0U; + + /* Reset XferAbortCallback */ + if (hi2c->hdmatx != NULL) + { + hi2c->hdmatx->XferAbortCallback = NULL; + } + if (hi2c->hdmarx != NULL) + { + hi2c->hdmarx->XferAbortCallback = NULL; + } + + /* Disable I2C peripheral to prevent dummy data in buffer */ + __HAL_I2C_DISABLE(hi2c); + + /* Check if come from abort from user */ + if (hi2c->State == HAL_I2C_STATE_ABORT) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AbortCpltCallback(hi2c); +#else + HAL_I2C_AbortCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + if (((uint32_t)CurrentState & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + /* Renable I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + + /* Enable Acknowledge */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK); + + /* keep HAL_I2C_STATE_LISTEN */ + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_LISTEN; + } + else + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + } + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ErrorCallback(hi2c); +#else + HAL_I2C_ErrorCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief This function handles I2C Communication Timeout. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param Flag specifies the I2C flag to check. + * @param Status The new Flag status (SET or RESET). + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart) +{ + /* Wait until flag is set */ + while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for Master addressing phase. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @param Flag specifies the I2C flag to check. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnMasterAddressFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, Flag) == RESET) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) + { + /* Generate Stop */ + SET_BIT(hi2c->Instance->CR1, I2C_CR1_STOP); + + /* Clear AF Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of TXE flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnTXEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET) + { + /* Check if a NACK is detected */ + if (I2C_IsAcknowledgeFailed(hi2c) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of BTF flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnBTFFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == RESET) + { + /* Check if a NACK is detected */ + if (I2C_IsAcknowledgeFailed(hi2c) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of STOP flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + { + /* Check if a NACK is detected */ + if (I2C_IsAcknowledgeFailed(hi2c) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of STOP request through Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnSTOPRequestThroughIT(I2C_HandleTypeDef *hi2c) +{ + __IO uint32_t count = 0U; + + /* Wait until STOP flag is reset */ + count = I2C_TIMEOUT_STOP_FLAG * (SystemCoreClock / 25U / 1000U); + do + { + count--; + if (count == 0U) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + return HAL_ERROR; + } + } + while (READ_BIT(hi2c->Instance->CR1, I2C_CR1_STOP) == I2C_CR1_STOP); + + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of RXNE flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET) + { + /* Check if a STOPF is detected */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) + { + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->ErrorCode |= HAL_I2C_ERROR_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + return HAL_OK; +} + +/** + * @brief This function handles Acknowledge failed detection during an I2C Communication. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c) +{ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) + { + /* Clear NACKF Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + return HAL_OK; +} + +/** + * @brief Convert I2Cx OTHER_xxx XferOptions to functional XferOptions. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c) +{ + /* if user set XferOptions to I2C_OTHER_FRAME */ + /* it request implicitly to generate a restart condition */ + /* set XferOptions to I2C_FIRST_FRAME */ + if (hi2c->XferOptions == I2C_OTHER_FRAME) + { + hi2c->XferOptions = I2C_FIRST_FRAME; + } + /* else if user set XferOptions to I2C_OTHER_AND_LAST_FRAME */ + /* it request implicitly to generate a restart condition */ + /* then generate a stop condition at the end of transfer */ + /* set XferOptions to I2C_FIRST_AND_LAST_FRAME */ + else if (hi2c->XferOptions == I2C_OTHER_AND_LAST_FRAME) + { + hi2c->XferOptions = I2C_FIRST_AND_LAST_FRAME; + } + else + { + /* Nothing to do */ + } +} + +/** + * @} + */ + +#endif /* HAL_I2C_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.c b/HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.c new file mode 100644 index 0000000..64aabaa --- /dev/null +++ b/HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.c @@ -0,0 +1,182 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_i2c_ex.c + * @author MCD Application Team + * @brief I2C Extension HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of I2C extension peripheral: + * + Extension features functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### I2C peripheral extension features ##### + ============================================================================== + + [..] Comparing to other previous devices, the I2C interface for STM32F427xx/437xx/ + 429xx/439xx devices contains the following additional features : + + (+) Possibility to disable or enable Analog Noise Filter + (+) Use of a configured Digital Noise Filter + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure Noise Filter + (#) Configure I2C Analog noise filter using the function HAL_I2C_AnalogFilter_Config() + (#) Configure I2C Digital noise filter using the function HAL_I2C_DigitalFilter_Config() + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @defgroup I2CEx I2CEx + * @brief I2C HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +#if defined(I2C_FLTR_ANOFF)&&defined(I2C_FLTR_DNF) +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup I2CEx_Exported_Functions I2C Exported Functions + * @{ + */ + + +/** @defgroup I2CEx_Exported_Functions_Group1 Extension features functions + * @brief Extension features functions + * +@verbatim + =============================================================================== + ##### Extension features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Noise Filters + +@endverbatim + * @{ + */ + +/** + * @brief Configures I2C Analog noise filter. + * @param hi2c pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @param AnalogFilter new state of the Analog filter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Reset I2Cx ANOFF bit */ + hi2c->Instance->FLTR &= ~(I2C_FLTR_ANOFF); + + /* Disable the analog filter */ + hi2c->Instance->FLTR |= AnalogFilter; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Configures I2C Digital noise filter. + * @param hi2c pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @param DigitalFilter Coefficient of digital noise filter between 0x00 and 0x0F. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter) +{ + uint16_t tmpreg = 0; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Get the old register value */ + tmpreg = hi2c->Instance->FLTR; + + /* Reset I2Cx DNF bit [3:0] */ + tmpreg &= ~(I2C_FLTR_DNF); + + /* Set I2Cx DNF coefficient */ + tmpreg |= DigitalFilter; + + /* Store the new register value */ + hi2c->Instance->FLTR = tmpreg; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @} + */ + +/** + * @} + */ +#endif + +#endif /* HAL_I2C_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/HAL_N_Middlewares/Inc/i2c.h b/HAL_N_Middlewares/Inc/i2c.h new file mode 100644 index 0000000..fae68df --- /dev/null +++ b/HAL_N_Middlewares/Inc/i2c.h @@ -0,0 +1,55 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file i2c.h + * @brief This file contains all the function prototypes for + * the i2c.c file + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __I2C_H__ +#define __I2C_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" + +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +extern I2C_HandleTypeDef hi2c2; + +extern I2C_HandleTypeDef hi2c3; + +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +void MX_I2C2_Init(void); +void MX_I2C3_Init(void); + +/* USER CODE BEGIN Prototypes */ + +/* USER CODE END Prototypes */ + +#ifdef __cplusplus +} +#endif + +#endif /* __I2C_H__ */ + diff --git a/HAL_N_Middlewares/Inc/main.h b/HAL_N_Middlewares/Inc/main.h index ce98080..554637b 100644 --- a/HAL_N_Middlewares/Inc/main.h +++ b/HAL_N_Middlewares/Inc/main.h @@ -59,8 +59,12 @@ void Error_Handler(void); /* Private defines -----------------------------------------------------------*/ #define IMU_TEMP_Pin GPIO_PIN_8 #define IMU_TEMP_GPIO_Port GPIOB +#define MAG_RST_Pin GPIO_PIN_6 +#define MAG_RST_GPIO_Port GPIOG #define LED_R_Pin GPIO_PIN_12 #define LED_R_GPIO_Port GPIOH +#define MAG_DR_Pin GPIO_PIN_3 +#define MAG_DR_GPIO_Port GPIOG #define LED_G_Pin GPIO_PIN_11 #define LED_G_GPIO_Port GPIOH #define LED_B_Pin GPIO_PIN_10 @@ -75,6 +79,7 @@ void Error_Handler(void); #define SERVO_GPIO_Port GPIOE #define CS1_GYRO_Pin GPIO_PIN_0 #define CS1_GYRO_GPIO_Port GPIOB + /* USER CODE BEGIN Private defines */ /* USER CODE END Private defines */ diff --git a/HAL_N_Middlewares/Inc/spi.h b/HAL_N_Middlewares/Inc/spi.h index a5dbefc..5c35683 100644 --- a/HAL_N_Middlewares/Inc/spi.h +++ b/HAL_N_Middlewares/Inc/spi.h @@ -34,11 +34,14 @@ extern "C" { extern SPI_HandleTypeDef hspi1; +extern SPI_HandleTypeDef hspi2; + /* USER CODE BEGIN Private defines */ /* USER CODE END Private defines */ void MX_SPI1_Init(void); +void MX_SPI2_Init(void); /* USER CODE BEGIN Prototypes */ diff --git a/HAL_N_Middlewares/Inc/stm32f4xx_hal_conf.h b/HAL_N_Middlewares/Inc/stm32f4xx_hal_conf.h index 305e248..264135c 100644 --- a/HAL_N_Middlewares/Inc/stm32f4xx_hal_conf.h +++ b/HAL_N_Middlewares/Inc/stm32f4xx_hal_conf.h @@ -37,50 +37,49 @@ */ #define HAL_MODULE_ENABLED - #define HAL_ADC_MODULE_ENABLED -/* #define HAL_CRYP_MODULE_ENABLED */ + /* #define HAL_CRYP_MODULE_ENABLED */ +#define HAL_ADC_MODULE_ENABLED #define HAL_CAN_MODULE_ENABLED -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_PCCARD_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +#define HAL_I2C_MODULE_ENABLED +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ #define HAL_RNG_MODULE_ENABLED #define HAL_RTC_MODULE_ENABLED -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +/* #define HAL_MMC_MODULE_ENABLED */ #define HAL_SPI_MODULE_ENABLED #define HAL_TIM_MODULE_ENABLED #define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ #define HAL_PCD_MODULE_ENABLED -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_DSI_MODULE_ENABLED */ -/* #define HAL_QSPI_MODULE_ENABLED */ -/* #define HAL_QSPI_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_FMPI2C_MODULE_ENABLED */ -/* #define HAL_FMPSMBUS_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_DSI_MODULE_ENABLED */ +/* #define HAL_QSPI_MODULE_ENABLED */ +/* #define HAL_QSPI_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_FMPI2C_MODULE_ENABLED */ +/* #define HAL_FMPSMBUS_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ #define HAL_GPIO_MODULE_ENABLED #define HAL_EXTI_MODULE_ENABLED #define HAL_DMA_MODULE_ENABLED @@ -214,7 +213,7 @@ #define MAC_ADDR5 0U /* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_RX_BUF_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ #define ETH_TXBUFNB 4U /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ diff --git a/HAL_N_Middlewares/Inc/usbd_conf.h b/HAL_N_Middlewares/Inc/usbd_conf.h index db51286..4c39852 100644 --- a/HAL_N_Middlewares/Inc/usbd_conf.h +++ b/HAL_N_Middlewares/Inc/usbd_conf.h @@ -116,7 +116,7 @@ #if (USBD_DEBUG_LEVEL > 1) -#define USBD_ErrLog(...) printf("ERROR: ") ;\ +#define USBD_ErrLog(...) printf("ERROR: ");\ printf(__VA_ARGS__);\ printf("\n"); #else @@ -124,7 +124,7 @@ #endif /* (USBD_DEBUG_LEVEL > 1U) */ #if (USBD_DEBUG_LEVEL > 2) -#define USBD_DbgLog(...) printf("DEBUG : ") ;\ +#define USBD_DbgLog(...) printf("DEBUG : ");\ printf(__VA_ARGS__);\ printf("\n"); #else diff --git a/HAL_N_Middlewares/Src/gpio.c b/HAL_N_Middlewares/Src/gpio.c index b7dc222..a27349e 100644 --- a/HAL_N_Middlewares/Src/gpio.c +++ b/HAL_N_Middlewares/Src/gpio.c @@ -51,15 +51,32 @@ void MX_GPIO_Init(void) __HAL_RCC_GPIOD_CLK_ENABLE(); __HAL_RCC_GPIOC_CLK_ENABLE(); __HAL_RCC_GPIOI_CLK_ENABLE(); + __HAL_RCC_GPIOF_CLK_ENABLE(); __HAL_RCC_GPIOH_CLK_ENABLE(); __HAL_RCC_GPIOE_CLK_ENABLE(); + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(MAG_RST_GPIO_Port, MAG_RST_Pin, GPIO_PIN_RESET); + /*Configure GPIO pin Output Level */ HAL_GPIO_WritePin(CS1_ACCEL_GPIO_Port, CS1_ACCEL_Pin, GPIO_PIN_SET); /*Configure GPIO pin Output Level */ HAL_GPIO_WritePin(CS1_GYRO_GPIO_Port, CS1_GYRO_Pin, GPIO_PIN_SET); + /*Configure GPIO pin : PtPin */ + GPIO_InitStruct.Pin = MAG_RST_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_MEDIUM; + HAL_GPIO_Init(MAG_RST_GPIO_Port, &GPIO_InitStruct); + + /*Configure GPIO pin : PtPin */ + GPIO_InitStruct.Pin = MAG_DR_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING; + GPIO_InitStruct.Pull = GPIO_PULLUP; + HAL_GPIO_Init(MAG_DR_GPIO_Port, &GPIO_InitStruct); + /*Configure GPIO pin : PtPin */ GPIO_InitStruct.Pin = KEY_Pin; GPIO_InitStruct.Mode = GPIO_MODE_INPUT; diff --git a/HAL_N_Middlewares/Src/i2c.c b/HAL_N_Middlewares/Src/i2c.c new file mode 100644 index 0000000..80a9152 --- /dev/null +++ b/HAL_N_Middlewares/Src/i2c.c @@ -0,0 +1,198 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file i2c.c + * @brief This file provides code for the configuration + * of the I2C instances. + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Includes ------------------------------------------------------------------*/ +#include "i2c.h" + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +I2C_HandleTypeDef hi2c2; +I2C_HandleTypeDef hi2c3; + +/* I2C2 init function */ +void MX_I2C2_Init(void) +{ + + /* USER CODE BEGIN I2C2_Init 0 */ + + /* USER CODE END I2C2_Init 0 */ + + /* USER CODE BEGIN I2C2_Init 1 */ + + /* USER CODE END I2C2_Init 1 */ + hi2c2.Instance = I2C2; + hi2c2.Init.ClockSpeed = 400000; + hi2c2.Init.DutyCycle = I2C_DUTYCYCLE_2; + hi2c2.Init.OwnAddress1 = 0; + hi2c2.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT; + hi2c2.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE; + hi2c2.Init.OwnAddress2 = 0; + hi2c2.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE; + hi2c2.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE; + if (HAL_I2C_Init(&hi2c2) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN I2C2_Init 2 */ + + /* USER CODE END I2C2_Init 2 */ + +} +/* I2C3 init function */ +void MX_I2C3_Init(void) +{ + + /* USER CODE BEGIN I2C3_Init 0 */ + + /* USER CODE END I2C3_Init 0 */ + + /* USER CODE BEGIN I2C3_Init 1 */ + + /* USER CODE END I2C3_Init 1 */ + hi2c3.Instance = I2C3; + hi2c3.Init.ClockSpeed = 400000; + hi2c3.Init.DutyCycle = I2C_DUTYCYCLE_2; + hi2c3.Init.OwnAddress1 = 0; + hi2c3.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT; + hi2c3.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE; + hi2c3.Init.OwnAddress2 = 0; + hi2c3.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE; + hi2c3.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE; + if (HAL_I2C_Init(&hi2c3) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN I2C3_Init 2 */ + + /* USER CODE END I2C3_Init 2 */ + +} + +void HAL_I2C_MspInit(I2C_HandleTypeDef* i2cHandle) +{ + + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if(i2cHandle->Instance==I2C2) + { + /* USER CODE BEGIN I2C2_MspInit 0 */ + + /* USER CODE END I2C2_MspInit 0 */ + + __HAL_RCC_GPIOF_CLK_ENABLE(); + /**I2C2 GPIO Configuration + PF0 ------> I2C2_SDA + PF1 ------> I2C2_SCL + */ + GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF4_I2C2; + HAL_GPIO_Init(GPIOF, &GPIO_InitStruct); + + /* I2C2 clock enable */ + __HAL_RCC_I2C2_CLK_ENABLE(); + /* USER CODE BEGIN I2C2_MspInit 1 */ + + /* USER CODE END I2C2_MspInit 1 */ + } + else if(i2cHandle->Instance==I2C3) + { + /* USER CODE BEGIN I2C3_MspInit 0 */ + + /* USER CODE END I2C3_MspInit 0 */ + + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOA_CLK_ENABLE(); + /**I2C3 GPIO Configuration + PC9 ------> I2C3_SDA + PA8 ------> I2C3_SCL + */ + GPIO_InitStruct.Pin = GPIO_PIN_9; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF4_I2C3; + HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = GPIO_PIN_8; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF4_I2C3; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* I2C3 clock enable */ + __HAL_RCC_I2C3_CLK_ENABLE(); + /* USER CODE BEGIN I2C3_MspInit 1 */ + + /* USER CODE END I2C3_MspInit 1 */ + } +} + +void HAL_I2C_MspDeInit(I2C_HandleTypeDef* i2cHandle) +{ + + if(i2cHandle->Instance==I2C2) + { + /* USER CODE BEGIN I2C2_MspDeInit 0 */ + + /* USER CODE END I2C2_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_I2C2_CLK_DISABLE(); + + /**I2C2 GPIO Configuration + PF0 ------> I2C2_SDA + PF1 ------> I2C2_SCL + */ + HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0); + + HAL_GPIO_DeInit(GPIOF, GPIO_PIN_1); + + /* USER CODE BEGIN I2C2_MspDeInit 1 */ + + /* USER CODE END I2C2_MspDeInit 1 */ + } + else if(i2cHandle->Instance==I2C3) + { + /* USER CODE BEGIN I2C3_MspDeInit 0 */ + + /* USER CODE END I2C3_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_I2C3_CLK_DISABLE(); + + /**I2C3 GPIO Configuration + PC9 ------> I2C3_SDA + PA8 ------> I2C3_SCL + */ + HAL_GPIO_DeInit(GPIOC, GPIO_PIN_9); + + HAL_GPIO_DeInit(GPIOA, GPIO_PIN_8); + + /* USER CODE BEGIN I2C3_MspDeInit 1 */ + + /* USER CODE END I2C3_MspDeInit 1 */ + } +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ diff --git a/HAL_N_Middlewares/Src/spi.c b/HAL_N_Middlewares/Src/spi.c index 043f842..4586ed9 100644 --- a/HAL_N_Middlewares/Src/spi.c +++ b/HAL_N_Middlewares/Src/spi.c @@ -25,6 +25,7 @@ /* USER CODE END 0 */ SPI_HandleTypeDef hspi1; +SPI_HandleTypeDef hspi2; /* SPI1 init function */ void MX_SPI1_Init(void) @@ -57,6 +58,38 @@ void MX_SPI1_Init(void) /* USER CODE END SPI1_Init 2 */ +} +/* SPI2 init function */ +void MX_SPI2_Init(void) +{ + + /* USER CODE BEGIN SPI2_Init 0 */ + + /* USER CODE END SPI2_Init 0 */ + + /* USER CODE BEGIN SPI2_Init 1 */ + + /* USER CODE END SPI2_Init 1 */ + hspi2.Instance = SPI2; + hspi2.Init.Mode = SPI_MODE_MASTER; + hspi2.Init.Direction = SPI_DIRECTION_2LINES; + hspi2.Init.DataSize = SPI_DATASIZE_8BIT; + hspi2.Init.CLKPolarity = SPI_POLARITY_HIGH; + hspi2.Init.CLKPhase = SPI_PHASE_2EDGE; + hspi2.Init.NSS = SPI_NSS_SOFT; + hspi2.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_256; + hspi2.Init.FirstBit = SPI_FIRSTBIT_MSB; + hspi2.Init.TIMode = SPI_TIMODE_DISABLE; + hspi2.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; + hspi2.Init.CRCPolynomial = 10; + if (HAL_SPI_Init(&hspi2) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN SPI2_Init 2 */ + + /* USER CODE END SPI2_Init 2 */ + } void HAL_SPI_MspInit(SPI_HandleTypeDef* spiHandle) @@ -96,6 +129,31 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* spiHandle) /* USER CODE END SPI1_MspInit 1 */ } + else if(spiHandle->Instance==SPI2) + { + /* USER CODE BEGIN SPI2_MspInit 0 */ + + /* USER CODE END SPI2_MspInit 0 */ + /* SPI2 clock enable */ + __HAL_RCC_SPI2_CLK_ENABLE(); + + __HAL_RCC_GPIOB_CLK_ENABLE(); + /**SPI2 GPIO Configuration + PB13 ------> SPI2_SCK + PB14 ------> SPI2_MISO + PB15 ------> SPI2_MOSI + */ + GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF5_SPI2; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /* USER CODE BEGIN SPI2_MspInit 1 */ + + /* USER CODE END SPI2_MspInit 1 */ + } } void HAL_SPI_MspDeInit(SPI_HandleTypeDef* spiHandle) @@ -122,6 +180,25 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* spiHandle) /* USER CODE END SPI1_MspDeInit 1 */ } + else if(spiHandle->Instance==SPI2) + { + /* USER CODE BEGIN SPI2_MspDeInit 0 */ + + /* USER CODE END SPI2_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_SPI2_CLK_DISABLE(); + + /**SPI2 GPIO Configuration + PB13 ------> SPI2_SCK + PB14 ------> SPI2_MISO + PB15 ------> SPI2_MOSI + */ + HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15); + + /* USER CODE BEGIN SPI2_MspDeInit 1 */ + + /* USER CODE END SPI2_MspDeInit 1 */ + } } /* USER CODE BEGIN 1 */ diff --git a/HAL_N_Middlewares/Src/usbd_desc.c b/HAL_N_Middlewares/Src/usbd_desc.c index 04f958b..89ab7d4 100644 --- a/HAL_N_Middlewares/Src/usbd_desc.c +++ b/HAL_N_Middlewares/Src/usbd_desc.c @@ -387,7 +387,9 @@ uint8_t * USBD_FS_USR_BOSDescriptor(USBD_SpeedTypeDef speed, uint16_t *length) */ static void Get_SerialNum(void) { - uint32_t deviceserial0, deviceserial1, deviceserial2; + uint32_t deviceserial0; + uint32_t deviceserial1; + uint32_t deviceserial2; deviceserial0 = *(uint32_t *) DEVICE_ID1; deviceserial1 = *(uint32_t *) DEVICE_ID2; diff --git a/Makefile b/Makefile index 3fa9f3b..7271da0 100644 --- a/Makefile +++ b/Makefile @@ -39,6 +39,7 @@ BUILD_DIR = build C_SOURCES = \ HAL_N_Middlewares/Src/main.c \ HAL_N_Middlewares/Src/gpio.c \ +HAL_N_Middlewares/Src/i2c.c \ HAL_N_Middlewares/Src/adc.c \ HAL_N_Middlewares/Src/can.c \ HAL_N_Middlewares/Src/dma.c \ @@ -64,6 +65,8 @@ HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c \ HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c \ HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c \ HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c \ +HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.c \ +HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c \ HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c \ HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c \ HAL_N_Middlewares/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c \ diff --git a/basic_framework.ioc b/basic_framework.ioc index 851ff09..38cc33d 100644 --- a/basic_framework.ioc +++ b/basic_framework.ioc @@ -6,6 +6,9 @@ ADC1.NbrOfConversionFlag=1 ADC1.Rank-0\#ChannelRegularConversion=1 ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_3CYCLES ADC1.master=1 +CAD.formats= +CAD.pinconfig= +CAD.provider= CAN1.BS1=CAN_BS1_10TQ CAN1.BS2=CAN_BS2_3TQ CAN1.CalculateBaudRate=1000000 @@ -79,31 +82,38 @@ FREERTOS.Tasks01=defaultTask,0,128,StartDefaultTask,Default,NULL,Dynamic,NULL,NU FREERTOS.configENABLE_FPU=1 File.Version=6 GPIO.groupedBy=Group By Peripherals +I2C2.I2C_Mode=I2C_Fast +I2C2.IPParameters=I2C_Mode +I2C3.I2C_Mode=I2C_Fast +I2C3.IPParameters=I2C_Mode KeepUserPlacement=false Mcu.CPN=STM32F407IGH6 Mcu.Family=STM32F4 Mcu.IP0=ADC1 Mcu.IP1=CAN1 -Mcu.IP10=SYS -Mcu.IP11=TIM1 -Mcu.IP12=TIM4 -Mcu.IP13=TIM5 -Mcu.IP14=TIM8 -Mcu.IP15=TIM10 -Mcu.IP16=USART1 -Mcu.IP17=USART3 -Mcu.IP18=USART6 -Mcu.IP19=USB_DEVICE +Mcu.IP10=RTC +Mcu.IP11=SPI1 +Mcu.IP12=SPI2 +Mcu.IP13=SYS +Mcu.IP14=TIM1 +Mcu.IP15=TIM4 +Mcu.IP16=TIM5 +Mcu.IP17=TIM8 +Mcu.IP18=TIM10 +Mcu.IP19=USART1 Mcu.IP2=CAN2 -Mcu.IP20=USB_OTG_FS +Mcu.IP20=USART3 +Mcu.IP21=USART6 +Mcu.IP22=USB_DEVICE +Mcu.IP23=USB_OTG_FS Mcu.IP3=DMA Mcu.IP4=FREERTOS -Mcu.IP5=NVIC -Mcu.IP6=RCC -Mcu.IP7=RNG -Mcu.IP8=RTC -Mcu.IP9=SPI1 -Mcu.IPNb=21 +Mcu.IP5=I2C2 +Mcu.IP6=I2C3 +Mcu.IP7=NVIC +Mcu.IP8=RCC +Mcu.IP9=RNG +Mcu.IPNb=24 Mcu.Name=STM32F407I(E-G)Hx Mcu.Package=UFBGA176 Mcu.Pin0=PB8 @@ -116,50 +126,59 @@ Mcu.Pin14=PI6 Mcu.Pin15=PG9 Mcu.Pin16=PD1 Mcu.Pin17=PA11 -Mcu.Pin18=PA9 -Mcu.Pin19=PH0-OSC_IN +Mcu.Pin18=PF0 +Mcu.Pin19=PA9 Mcu.Pin2=PG14 -Mcu.Pin20=PH1-OSC_OUT -Mcu.Pin21=PC6 -Mcu.Pin22=PH12 -Mcu.Pin23=PH11 -Mcu.Pin24=PH10 -Mcu.Pin25=PD14 -Mcu.Pin26=PA0-WKUP -Mcu.Pin27=PA4 -Mcu.Pin28=PE13 -Mcu.Pin29=PE9 +Mcu.Pin20=PC9 +Mcu.Pin21=PA8 +Mcu.Pin22=PH0-OSC_IN +Mcu.Pin23=PH1-OSC_OUT +Mcu.Pin24=PF1 +Mcu.Pin25=PC6 +Mcu.Pin26=PG6 +Mcu.Pin27=PH12 +Mcu.Pin28=PG3 +Mcu.Pin29=PH11 Mcu.Pin3=PB4 -Mcu.Pin30=PE11 -Mcu.Pin31=PE14 -Mcu.Pin32=PA7 -Mcu.Pin33=PB0 -Mcu.Pin34=VP_ADC1_TempSens_Input -Mcu.Pin35=VP_ADC1_Vref_Input -Mcu.Pin36=VP_FREERTOS_VS_CMSIS_V1 -Mcu.Pin37=VP_RNG_VS_RNG -Mcu.Pin38=VP_RTC_VS_RTC_Activate -Mcu.Pin39=VP_SYS_VS_Systick +Mcu.Pin30=PH10 +Mcu.Pin31=PD14 +Mcu.Pin32=PA0-WKUP +Mcu.Pin33=PA4 +Mcu.Pin34=PE13 +Mcu.Pin35=PE9 +Mcu.Pin36=PE11 +Mcu.Pin37=PE14 +Mcu.Pin38=PB13 +Mcu.Pin39=PA7 Mcu.Pin4=PB3 -Mcu.Pin40=VP_TIM1_VS_ClockSourceINT -Mcu.Pin41=VP_TIM4_VS_ClockSourceINT -Mcu.Pin42=VP_TIM5_VS_ClockSourceINT -Mcu.Pin43=VP_TIM8_VS_ClockSourceINT -Mcu.Pin44=VP_TIM10_VS_ClockSourceINT -Mcu.Pin45=VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS -Mcu.Pin46=VP_STMicroelectronics.X-CUBE-ALGOBUILD_VS_DSPOoLibraryJjLibrary_1.3.0_1.3.0 +Mcu.Pin40=PB0 +Mcu.Pin41=PB14 +Mcu.Pin42=PB15 +Mcu.Pin43=VP_ADC1_TempSens_Input +Mcu.Pin44=VP_ADC1_Vref_Input +Mcu.Pin45=VP_FREERTOS_VS_CMSIS_V1 +Mcu.Pin46=VP_RNG_VS_RNG +Mcu.Pin47=VP_RTC_VS_RTC_Activate +Mcu.Pin48=VP_SYS_VS_Systick +Mcu.Pin49=VP_TIM1_VS_ClockSourceINT Mcu.Pin5=PA14 +Mcu.Pin50=VP_TIM4_VS_ClockSourceINT +Mcu.Pin51=VP_TIM5_VS_ClockSourceINT +Mcu.Pin52=VP_TIM8_VS_ClockSourceINT +Mcu.Pin53=VP_TIM10_VS_ClockSourceINT +Mcu.Pin54=VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS +Mcu.Pin55=VP_STMicroelectronics.X-CUBE-ALGOBUILD_VS_DSPOoLibraryJjLibrary_1.3.0_1.3.0 Mcu.Pin6=PA13 Mcu.Pin7=PB7 Mcu.Pin8=PB6 Mcu.Pin9=PD0 -Mcu.PinsNb=47 +Mcu.PinsNb=56 Mcu.ThirdParty0=STMicroelectronics.X-CUBE-ALGOBUILD.1.3.0 Mcu.ThirdPartyNb=1 Mcu.UserConstants= Mcu.UserName=STM32F407IGHx -MxCube.Version=6.6.1 -MxDb.Version=DB.6.0.60 +MxCube.Version=6.7.0 +MxDb.Version=DB.6.0.70 NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false\:false NVIC.CAN1_RX0_IRQn=true\:6\:0\:true\:false\:true\:true\:true\:true\:true NVIC.CAN1_RX1_IRQn=true\:5\:0\:false\:false\:true\:true\:true\:true\:true @@ -212,6 +231,8 @@ PA7.GPIO_PuPd=GPIO_PULLUP PA7.Locked=true PA7.Mode=Full_Duplex_Master PA7.Signal=SPI1_MOSI +PA8.Mode=I2C +PA8.Signal=I2C3_SCL PA9.Locked=true PA9.Mode=Asynchronous PA9.Signal=USART1_TX @@ -222,6 +243,15 @@ PB0.GPIO_Speed=GPIO_SPEED_FREQ_HIGH PB0.Locked=true PB0.PinState=GPIO_PIN_SET PB0.Signal=GPIO_Output +PB13.Locked=true +PB13.Mode=Full_Duplex_Master +PB13.Signal=SPI2_SCK +PB14.Locked=true +PB14.Mode=Full_Duplex_Master +PB14.Signal=SPI2_MISO +PB15.Locked=true +PB15.Mode=Full_Duplex_Master +PB15.Signal=SPI2_MOSI PB3.GPIOParameters=GPIO_PuPd PB3.GPIO_PuPd=GPIO_PULLUP PB3.Locked=true @@ -255,6 +285,8 @@ PC11.Mode=Asynchronous PC11.Signal=USART3_RX PC6.Locked=true PC6.Signal=S_TIM8_CH1 +PC9.Mode=I2C +PC9.Signal=I2C3_SDA PD0.Locked=true PD0.Mode=CAN_Activate PD0.Signal=CAN1_RX @@ -277,9 +309,25 @@ PE9.GPIO_PuPd=GPIO_PULLUP PE9.GPIO_Speed=GPIO_SPEED_FREQ_HIGH PE9.Locked=true PE9.Signal=S_TIM1_CH1 +PF0.Mode=I2C +PF0.Signal=I2C2_SDA +PF1.Mode=I2C +PF1.Signal=I2C2_SCL PG14.Locked=true PG14.Mode=Asynchronous PG14.Signal=USART6_TX +PG3.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI +PG3.GPIO_Label=MAG_DR +PG3.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_FALLING +PG3.GPIO_PuPd=GPIO_PULLUP +PG3.Locked=true +PG3.Signal=GPXTI3 +PG6.GPIOParameters=GPIO_Speed,GPIO_PuPd,GPIO_Label +PG6.GPIO_Label=MAG_RST +PG6.GPIO_PuPd=GPIO_PULLUP +PG6.GPIO_Speed=GPIO_SPEED_FREQ_MEDIUM +PG6.Locked=true +PG6.Signal=GPIO_Output PG9.Locked=true PG9.Mode=Asynchronous PG9.Signal=USART6_RX @@ -336,7 +384,7 @@ ProjectManager.StackSize=0x4000 ProjectManager.TargetToolchain=Makefile ProjectManager.ToolChainLocation= ProjectManager.UnderRoot=false -ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-MX_DMA_Init-DMA-false-HAL-true,3-SystemClock_Config-RCC-false-HAL-false,4-MX_ADC1_Init-ADC1-false-HAL-true,5-MX_CAN1_Init-CAN1-false-HAL-true,6-MX_CAN2_Init-CAN2-false-HAL-true,7-MX_SPI1_Init-SPI1-false-HAL-true,8-MX_TIM4_Init-TIM4-false-HAL-true,9-MX_TIM5_Init-TIM5-false-HAL-true,10-MX_USART3_UART_Init-USART3-false-HAL-true,11-MX_RNG_Init-RNG-false-HAL-true,12-MX_RTC_Init-RTC-false-HAL-true,13-MX_TIM1_Init-TIM1-false-HAL-true,14-MX_TIM10_Init-TIM10-false-HAL-true,15-MX_USART1_UART_Init-USART1-false-HAL-true,16-MX_USART6_UART_Init-USART6-false-HAL-true,17-MX_USB_DEVICE_Init-USB_DEVICE-false-HAL-false,18-MX_TIM8_Init-TIM8-false-HAL-true +ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-MX_DMA_Init-DMA-false-HAL-true,3-SystemClock_Config-RCC-false-HAL-false,4-MX_ADC1_Init-ADC1-false-HAL-true,5-MX_CAN1_Init-CAN1-false-HAL-true,6-MX_CAN2_Init-CAN2-false-HAL-true,7-MX_SPI1_Init-SPI1-false-HAL-true,8-MX_TIM4_Init-TIM4-false-HAL-true,9-MX_TIM5_Init-TIM5-false-HAL-true,10-MX_USART3_UART_Init-USART3-false-HAL-true,11-MX_RNG_Init-RNG-false-HAL-true,12-MX_RTC_Init-RTC-false-HAL-true,13-MX_TIM1_Init-TIM1-false-HAL-true,14-MX_TIM10_Init-TIM10-false-HAL-true,15-MX_USART1_UART_Init-USART1-false-HAL-true,16-MX_USART6_UART_Init-USART6-false-HAL-true,17-MX_USB_DEVICE_Init-USB_DEVICE-false-HAL-false,18-MX_TIM8_Init-TIM8-false-HAL-true,19-MX_I2C2_Init-I2C2-false-HAL-true,20-MX_I2C3_Init-I2C3-false-HAL-true,21-MX_SPI2_Init-SPI2-false-HAL-true RCC.48MHZClocksFreq_Value=48000000 RCC.AHBFreq_Value=168000000 RCC.APB1CLKDivider=RCC_HCLK_DIV4 @@ -375,6 +423,8 @@ RCC.VcooutputI2S=192000000 RTC.AsynchPrediv=124 RTC.IPParameters=SynchPrediv,AsynchPrediv RTC.SynchPrediv=3199 +SH.GPXTI3.0=GPIO_EXTI3 +SH.GPXTI3.ConfNb=1 SH.S_TIM10_CH1.0=TIM10_CH1,PWM Generation1 CH1 SH.S_TIM10_CH1.ConfNb=1 SH.S_TIM1_CH1.0=TIM1_CH1,PWM Generation1 CH1 @@ -407,6 +457,14 @@ SPI1.Direction=SPI_DIRECTION_2LINES SPI1.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate,BaudRatePrescaler,CLKPolarity,CLKPhase SPI1.Mode=SPI_MODE_MASTER SPI1.VirtualType=VM_MASTER +SPI2.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_256 +SPI2.CLKPhase=SPI_PHASE_2EDGE +SPI2.CLKPolarity=SPI_POLARITY_HIGH +SPI2.CalculateBaudRate=164.062 KBits/s +SPI2.Direction=SPI_DIRECTION_2LINES +SPI2.IPParameters=VirtualType,Mode,Direction,CLKPhase,CLKPolarity,CalculateBaudRate,BaudRatePrescaler +SPI2.Mode=SPI_MODE_MASTER +SPI2.VirtualType=VM_MASTER STMicroelectronics.X-CUBE-ALGOBUILD.1.3.0.DSPOoLibraryJjLibrary_Checked=true STMicroelectronics.X-CUBE-ALGOBUILD.1.3.0.IPParameters=LibraryCcDSPOoLibraryJjDSPOoLibrary STMicroelectronics.X-CUBE-ALGOBUILD.1.3.0.LibraryCcDSPOoLibraryJjDSPOoLibrary=true diff --git a/bsp/bsp_can.c b/bsp/bsp_can.c index 930cf47..71a16c4 100644 --- a/bsp/bsp_can.c +++ b/bsp/bsp_can.c @@ -1,6 +1,5 @@ #include "bsp_can.h" #include "main.h" -#include #include "memory.h" /* can instance ptrs storage, used for recv callback */ diff --git a/bsp/bsp_spi.h b/bsp/bsp_spi.h index e69de29..f289901 100644 --- a/bsp/bsp_spi.h +++ b/bsp/bsp_spi.h @@ -0,0 +1,4 @@ + +#include "stdint.h" +#include "spi.h" +