306 lines
9.3 KiB
C
306 lines
9.3 KiB
C
/* USER CODE BEGIN Header */
|
|
/**
|
|
******************************************************************************
|
|
* @file spi.c
|
|
* @brief This file provides code for the configuration
|
|
* of the SPI instances.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2024 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
/* USER CODE END Header */
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "spi.h"
|
|
|
|
/* USER CODE BEGIN 0 */
|
|
|
|
/* USER CODE END 0 */
|
|
|
|
SPI_HandleTypeDef hspi1;
|
|
SPI_HandleTypeDef hspi2;
|
|
DMA_HandleTypeDef hdma_spi1_rx;
|
|
DMA_HandleTypeDef hdma_spi1_tx;
|
|
|
|
/* SPI1 init function */
|
|
void MX_SPI1_Init(void)
|
|
{
|
|
|
|
/* USER CODE BEGIN SPI1_Init 0 */
|
|
|
|
/* USER CODE END SPI1_Init 0 */
|
|
|
|
/* USER CODE BEGIN SPI1_Init 1 */
|
|
|
|
/* USER CODE END SPI1_Init 1 */
|
|
hspi1.Instance = SPI1;
|
|
hspi1.Init.Mode = SPI_MODE_MASTER;
|
|
hspi1.Init.Direction = SPI_DIRECTION_2LINES;
|
|
hspi1.Init.DataSize = SPI_DATASIZE_8BIT;
|
|
hspi1.Init.CLKPolarity = SPI_POLARITY_HIGH;
|
|
hspi1.Init.CLKPhase = SPI_PHASE_2EDGE;
|
|
hspi1.Init.NSS = SPI_NSS_SOFT;
|
|
hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_8;
|
|
hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB;
|
|
hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
|
|
hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
|
|
hspi1.Init.CRCPolynomial = 0x0;
|
|
hspi1.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
|
|
hspi1.Init.NSSPolarity = SPI_NSS_POLARITY_LOW;
|
|
hspi1.Init.FifoThreshold = SPI_FIFO_THRESHOLD_01DATA;
|
|
hspi1.Init.TxCRCInitializationPattern = SPI_CRC_INITIALIZATION_ALL_ZERO_PATTERN;
|
|
hspi1.Init.RxCRCInitializationPattern = SPI_CRC_INITIALIZATION_ALL_ZERO_PATTERN;
|
|
hspi1.Init.MasterSSIdleness = SPI_MASTER_SS_IDLENESS_00CYCLE;
|
|
hspi1.Init.MasterInterDataIdleness = SPI_MASTER_INTERDATA_IDLENESS_00CYCLE;
|
|
hspi1.Init.MasterReceiverAutoSusp = SPI_MASTER_RX_AUTOSUSP_DISABLE;
|
|
hspi1.Init.MasterKeepIOState = SPI_MASTER_KEEP_IO_STATE_DISABLE;
|
|
hspi1.Init.IOSwap = SPI_IO_SWAP_DISABLE;
|
|
if (HAL_SPI_Init(&hspi1) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/* USER CODE BEGIN SPI1_Init 2 */
|
|
|
|
/* USER CODE END SPI1_Init 2 */
|
|
|
|
}
|
|
/* SPI2 init function */
|
|
void MX_SPI2_Init(void)
|
|
{
|
|
|
|
/* USER CODE BEGIN SPI2_Init 0 */
|
|
|
|
/* USER CODE END SPI2_Init 0 */
|
|
|
|
/* USER CODE BEGIN SPI2_Init 1 */
|
|
|
|
/* USER CODE END SPI2_Init 1 */
|
|
hspi2.Instance = SPI2;
|
|
hspi2.Init.Mode = SPI_MODE_MASTER;
|
|
hspi2.Init.Direction = SPI_DIRECTION_2LINES;
|
|
hspi2.Init.DataSize = SPI_DATASIZE_4BIT;
|
|
hspi2.Init.CLKPolarity = SPI_POLARITY_LOW;
|
|
hspi2.Init.CLKPhase = SPI_PHASE_1EDGE;
|
|
hspi2.Init.NSS = SPI_NSS_SOFT;
|
|
hspi2.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
|
|
hspi2.Init.FirstBit = SPI_FIRSTBIT_MSB;
|
|
hspi2.Init.TIMode = SPI_TIMODE_DISABLE;
|
|
hspi2.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
|
|
hspi2.Init.CRCPolynomial = 0x0;
|
|
hspi2.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
|
|
hspi2.Init.NSSPolarity = SPI_NSS_POLARITY_LOW;
|
|
hspi2.Init.FifoThreshold = SPI_FIFO_THRESHOLD_01DATA;
|
|
hspi2.Init.TxCRCInitializationPattern = SPI_CRC_INITIALIZATION_ALL_ZERO_PATTERN;
|
|
hspi2.Init.RxCRCInitializationPattern = SPI_CRC_INITIALIZATION_ALL_ZERO_PATTERN;
|
|
hspi2.Init.MasterSSIdleness = SPI_MASTER_SS_IDLENESS_00CYCLE;
|
|
hspi2.Init.MasterInterDataIdleness = SPI_MASTER_INTERDATA_IDLENESS_00CYCLE;
|
|
hspi2.Init.MasterReceiverAutoSusp = SPI_MASTER_RX_AUTOSUSP_DISABLE;
|
|
hspi2.Init.MasterKeepIOState = SPI_MASTER_KEEP_IO_STATE_DISABLE;
|
|
hspi2.Init.IOSwap = SPI_IO_SWAP_DISABLE;
|
|
if (HAL_SPI_Init(&hspi2) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/* USER CODE BEGIN SPI2_Init 2 */
|
|
|
|
/* USER CODE END SPI2_Init 2 */
|
|
|
|
}
|
|
|
|
void HAL_SPI_MspInit(SPI_HandleTypeDef* spiHandle)
|
|
{
|
|
|
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
|
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
|
|
if(spiHandle->Instance==SPI1)
|
|
{
|
|
/* USER CODE BEGIN SPI1_MspInit 0 */
|
|
|
|
/* USER CODE END SPI1_MspInit 0 */
|
|
|
|
/** Initializes the peripherals clock
|
|
*/
|
|
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SPI1;
|
|
PeriphClkInitStruct.Spi123ClockSelection = RCC_SPI123CLKSOURCE_PLL;
|
|
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
|
|
/* SPI1 clock enable */
|
|
__HAL_RCC_SPI1_CLK_ENABLE();
|
|
|
|
__HAL_RCC_GPIOD_CLK_ENABLE();
|
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
|
/**SPI1 GPIO Configuration
|
|
PD7 ------> SPI1_MOSI
|
|
PB3(JTDO/TRACESWO) ------> SPI1_SCK
|
|
PB4(NJTRST) ------> SPI1_MISO
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_7;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
GPIO_InitStruct.Alternate = GPIO_AF5_SPI1;
|
|
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
|
|
|
|
GPIO_InitStruct.Pin = GPIO_PIN_3|GPIO_PIN_4;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
GPIO_InitStruct.Alternate = GPIO_AF5_SPI1;
|
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
|
|
/* SPI1 DMA Init */
|
|
/* SPI1_RX Init */
|
|
hdma_spi1_rx.Instance = DMA2_Stream3;
|
|
hdma_spi1_rx.Init.Request = DMA_REQUEST_SPI1_RX;
|
|
hdma_spi1_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
|
|
hdma_spi1_rx.Init.PeriphInc = DMA_PINC_DISABLE;
|
|
hdma_spi1_rx.Init.MemInc = DMA_MINC_ENABLE;
|
|
hdma_spi1_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
|
hdma_spi1_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
|
hdma_spi1_rx.Init.Mode = DMA_NORMAL;
|
|
hdma_spi1_rx.Init.Priority = DMA_PRIORITY_LOW;
|
|
hdma_spi1_rx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
|
if (HAL_DMA_Init(&hdma_spi1_rx) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
|
|
__HAL_LINKDMA(spiHandle,hdmarx,hdma_spi1_rx);
|
|
|
|
/* SPI1_TX Init */
|
|
hdma_spi1_tx.Instance = DMA2_Stream4;
|
|
hdma_spi1_tx.Init.Request = DMA_REQUEST_SPI1_TX;
|
|
hdma_spi1_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
|
|
hdma_spi1_tx.Init.PeriphInc = DMA_PINC_DISABLE;
|
|
hdma_spi1_tx.Init.MemInc = DMA_MINC_ENABLE;
|
|
hdma_spi1_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
|
hdma_spi1_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
|
hdma_spi1_tx.Init.Mode = DMA_NORMAL;
|
|
hdma_spi1_tx.Init.Priority = DMA_PRIORITY_LOW;
|
|
hdma_spi1_tx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
|
if (HAL_DMA_Init(&hdma_spi1_tx) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
|
|
__HAL_LINKDMA(spiHandle,hdmatx,hdma_spi1_tx);
|
|
|
|
/* SPI1 interrupt Init */
|
|
HAL_NVIC_SetPriority(SPI1_IRQn, 5, 0);
|
|
HAL_NVIC_EnableIRQ(SPI1_IRQn);
|
|
/* USER CODE BEGIN SPI1_MspInit 1 */
|
|
|
|
/* USER CODE END SPI1_MspInit 1 */
|
|
}
|
|
else if(spiHandle->Instance==SPI2)
|
|
{
|
|
/* USER CODE BEGIN SPI2_MspInit 0 */
|
|
|
|
/* USER CODE END SPI2_MspInit 0 */
|
|
|
|
/** Initializes the peripherals clock
|
|
*/
|
|
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SPI2;
|
|
PeriphClkInitStruct.Spi123ClockSelection = RCC_SPI123CLKSOURCE_PLL;
|
|
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
|
|
/* SPI2 clock enable */
|
|
__HAL_RCC_SPI2_CLK_ENABLE();
|
|
|
|
__HAL_RCC_GPIOC_CLK_ENABLE();
|
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
|
/**SPI2 GPIO Configuration
|
|
PC1 ------> SPI2_MOSI
|
|
PC2_C ------> SPI2_MISO
|
|
PB13 ------> SPI2_SCK
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_2;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
|
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
|
|
|
GPIO_InitStruct.Pin = GPIO_PIN_13;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
|
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
|
|
/* USER CODE BEGIN SPI2_MspInit 1 */
|
|
|
|
/* USER CODE END SPI2_MspInit 1 */
|
|
}
|
|
}
|
|
|
|
void HAL_SPI_MspDeInit(SPI_HandleTypeDef* spiHandle)
|
|
{
|
|
|
|
if(spiHandle->Instance==SPI1)
|
|
{
|
|
/* USER CODE BEGIN SPI1_MspDeInit 0 */
|
|
|
|
/* USER CODE END SPI1_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_SPI1_CLK_DISABLE();
|
|
|
|
/**SPI1 GPIO Configuration
|
|
PD7 ------> SPI1_MOSI
|
|
PB3(JTDO/TRACESWO) ------> SPI1_SCK
|
|
PB4(NJTRST) ------> SPI1_MISO
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOD, GPIO_PIN_7);
|
|
|
|
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_3|GPIO_PIN_4);
|
|
|
|
/* SPI1 DMA DeInit */
|
|
HAL_DMA_DeInit(spiHandle->hdmarx);
|
|
HAL_DMA_DeInit(spiHandle->hdmatx);
|
|
|
|
/* SPI1 interrupt Deinit */
|
|
HAL_NVIC_DisableIRQ(SPI1_IRQn);
|
|
/* USER CODE BEGIN SPI1_MspDeInit 1 */
|
|
|
|
/* USER CODE END SPI1_MspDeInit 1 */
|
|
}
|
|
else if(spiHandle->Instance==SPI2)
|
|
{
|
|
/* USER CODE BEGIN SPI2_MspDeInit 0 */
|
|
|
|
/* USER CODE END SPI2_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_SPI2_CLK_DISABLE();
|
|
|
|
/**SPI2 GPIO Configuration
|
|
PC1 ------> SPI2_MOSI
|
|
PC2_C ------> SPI2_MISO
|
|
PB13 ------> SPI2_SCK
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_1|GPIO_PIN_2);
|
|
|
|
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13);
|
|
|
|
/* USER CODE BEGIN SPI2_MspDeInit 1 */
|
|
|
|
/* USER CODE END SPI2_MspDeInit 1 */
|
|
}
|
|
}
|
|
|
|
/* USER CODE BEGIN 1 */
|
|
|
|
/* USER CODE END 1 */
|