#include "HT04.h"
#include "memory.h"
#include "general_def.h"
#include "user_lib.h"
#include "cmsis_os.h"
#include "string.h"
#include "daemon.h"
#include "stdlib.h"
#include "bsp_log.h"

static uint8_t idx;
static HTMotorInstance *ht_motor_instance[HT_MOTOR_CNT];
static osThreadId ht_task_handle[HT_MOTOR_CNT];
static uint8_t zero_buff[6] = {0};

/**
 * @brief 设置电机模式,报文内容[0xff,0xff,0xff,0xff,0xff,0xff,0xff,cmd]
 *
 * @param cmd
 * @param motor
 */
static void HTMotorSetMode(HTMotor_Mode_t cmd, HTMotorInstance *motor)
{
    memset(motor->motor_can_instace->tx_buff, 0xff, 7);  // 发送电机指令的时候前面7bytes都是0xff
    motor->motor_can_instace->tx_buff[7] = (uint8_t)cmd; // 最后一位是命令id
    FDCANTransmit(motor->motor_can_instace, 1);
    memcpy(motor->motor_can_instace->tx_buff, zero_buff, 6);
}
/**
 * @brief 解析电机反馈值
 *
 * @param motor_can 收到
 */
static void HTMotorDecode(FDCANInstance *motor_can)
{
    uint16_t tmp; // 用于暂存解析值,稍后转换成float数据,避免多次创建临时变量
    uint8_t const *rxbuff = motor_can->rx_buff;
    HTMotorInstance *motor = (HTMotorInstance *)motor_can->id;
    HTMotor_Measure_t *measure = &(motor->measure); // 将can实例中保存的id转换成电机实例的指针

    DaemonReload(motor->motor_daemon);
    measure->feed_dt = DWT_GetDeltaT(&measure->feed_cnt);

    measure->last_angle = measure->total_angle;
    tmp = (uint16_t)((rxbuff[1] << 8) | rxbuff[2]);
    measure->total_angle = uint_to_float(tmp, P_MIN, P_MAX, 16);

    tmp = (uint16_t)(rxbuff[3] << 4) | (rxbuff[4] >> 4);
    measure->speed_rads = AverageFilter((uint_to_float(tmp, V_MIN, V_MAX, 12) - HT_SPEED_BIAS), measure->speed_buff, SPEED_BUFFER_SIZE);

    tmp = (uint16_t)(((rxbuff[4] & 0x0f) << 8) | rxbuff[5]);
    measure->real_current = CURRENT_SMOOTH_COEF * uint_to_float(tmp, T_MIN, T_MAX, 12) +
                            (1 - CURRENT_SMOOTH_COEF) * measure->real_current;
}

static void HTMotorLostCallback(void *motor_ptr)
{
    HTMotorInstance *motor = (HTMotorInstance *)motor_ptr;
    LOGWARNING("[ht_motor] motor %d lost\n", motor->motor_can_instace->tx_id);
    if (++motor->lost_cnt % 10 != 0)
        HTMotorSetMode(CMD_MOTOR_MODE, motor); // 尝试重新让电机进入控制模式
}

/* 海泰电机一生黑,什么垃圾协议! */
void HTMotorCalibEncoder(HTMotorInstance *motor)
{
    uint16_t p, v, kp, kd, t;
    p = float_to_uint(0, P_MIN, P_MAX, 16);
    v = float_to_uint(0, V_MIN, V_MAX, 12);
    kp = float_to_uint(0, KP_MIN, KP_MAX, 12);
    kd = float_to_uint(0, KD_MIN, KD_MAX, 12);
    t = float_to_uint(0, T_MIN, T_MAX, 12);

    uint8_t *buf = motor->motor_can_instace->tx_buff;
    buf[0] = p >> 8;
    buf[1] = p & 0xFF;
    buf[2] = v >> 4;
    buf[3] = ((v & 0xF) << 4) | (kp >> 8);
    buf[4] = kp & 0xFF;
    buf[5] = kd >> 4;
    buf[6] = ((kd & 0xF) << 4) | (t >> 8);
    buf[7] = t & 0xff;
    memcpy(zero_buff, buf, 6); // 初始化的时候至少调用一次,故将其他指令为0时发送的报文保存一下,详见ht04电机说明
    CANTransmit(motor->motor_can_instace, 1);
    DWT_Delay(0.005);
    HTMotorSetMode(CMD_ZERO_POSITION, motor); // sb 玩意校准完了编码器也不为0
    DWT_Delay(0.005);
    // HTMotorSetMode(CMD_MOTOR_MODE, motor);
}

HTMotorInstance *HTMotorInit(Motor_Init_Config_s *config)
{
    HTMotorInstance *motor = (HTMotorInstance *)malloc(sizeof(HTMotorInstance));
    memset(motor, 0, sizeof(HTMotorInstance));

    motor->motor_settings = config->controller_setting_init_config;
    PIDInit(&motor->current_PID, &config->controller_param_init_config.current_PID);
    PIDInit(&motor->speed_PID, &config->controller_param_init_config.speed_PID);
    PIDInit(&motor->angle_PID, &config->controller_param_init_config.angle_PID);
    motor->other_angle_feedback_ptr = config->controller_param_init_config.other_angle_feedback_ptr;
    motor->other_speed_feedback_ptr = config->controller_param_init_config.other_speed_feedback_ptr;

    config->can_init_config.fdcan_module_callback = HTMotorDecode;
    config->can_init_config.id = motor;
    motor->motor_can_instace = FDCANRegister(&config->can_init_config);

    Daemon_Init_Config_s conf = {
        .callback = HTMotorLostCallback,
        .owner_id = motor,
        .reload_count = 5, // 20ms
    };
    motor->motor_daemon = DaemonRegister(&conf);

    HTMotorEnable(motor);
    HTMotorSetMode(CMD_MOTOR_MODE, motor); // 确保电机已经上电并执行电机模式
    DWT_Delay(0.05f);
    HTMotorCalibEncoder(motor); // 将当前编码器位置作为零位
    DWT_Delay(0.05f);           // 保证下一个电机发送时CAN是空闲的,注意应用在初始化模块的时候不应该进入中断
    ht_motor_instance[idx++] = motor;
    return motor;
}

void HTMotorSetRef(HTMotorInstance *motor, float ref)
{
    motor->pid_ref = ref;
}

/**
 * @brief 为了避免总线堵塞,为每个电机创建一个发送任务
 * @param argument 传入的电机指针
 */
__attribute__((noreturn)) void HTMotorTask(void const *argument)
{
    float set, pid_measure, pid_ref;
    HTMotorInstance *motor = (HTMotorInstance *)argument;
    HTMotor_Measure_t *measure = &motor->measure;
    Motor_Control_Setting_s *setting = &motor->motor_settings;
    FDCANInstance *motor_can = motor->motor_can_instace;
    uint16_t tmp;

    while (1)
    {
        pid_ref = motor->pid_ref;
        if ((setting->close_loop_type & ANGLE_LOOP) && setting->outer_loop_type == ANGLE_LOOP)
        {
            if (setting->angle_feedback_source == OTHER_FEED)
                pid_measure = *motor->other_angle_feedback_ptr;
            else
                pid_measure = measure->total_angle;
            // measure单位是rad,ref是角度,统一到angle下计算,方便建模
            pid_ref = PIDCalculate(&motor->angle_PID, pid_measure * RAD_2_DEGREE, pid_ref);
        }

        if ((setting->close_loop_type & SPEED_LOOP) && setting->outer_loop_type & (ANGLE_LOOP | SPEED_LOOP))
        {
            if (setting->feedforward_flag & SPEED_FEEDFORWARD)
                pid_ref += *motor->speed_feedforward_ptr;

            if (setting->angle_feedback_source == OTHER_FEED)
                pid_measure = *motor->other_speed_feedback_ptr;
            else
                pid_measure = measure->speed_rads;
            // measure单位是rad / s ,ref是angle per sec,统一到angle下计算
            pid_ref = PIDCalculate(&motor->speed_PID, pid_measure * RAD_2_DEGREE, pid_ref);
        }

        if (setting->feedforward_flag & CURRENT_FEEDFORWARD)
            pid_ref += *motor->current_feedforward_ptr;
        if (setting->close_loop_type & CURRENT_LOOP)
        {
            pid_ref = PIDCalculate(&motor->current_PID, measure->real_current, pid_ref);
        }

        set = pid_ref;
        if (setting->motor_reverse_flag == MOTOR_DIRECTION_REVERSE)
            set *= -1;

        LIMIT_MIN_MAX(set, T_MIN, T_MAX);
        tmp = float_to_uint(set, T_MIN, T_MAX, 12);
        if (motor->stop_flag == MOTOR_STOP)
            tmp = float_to_uint(0, T_MIN, T_MAX, 12);
        motor_can->tx_buff[6] = (tmp >> 8);
        motor_can->tx_buff[7] = tmp & 0xff;

        FDCANTransmit(motor_can, 0.5);

        osDelay(1);
    }
}

void HTMotorControlInit()
{
    char ht_task_name[5] = "ht";
    // 遍历所有电机实例,创建任务
    if (!idx)
        return;
    for (size_t i = 0; i < idx; i++)
    {
        char ht_id_buff[2] = {0};
        __itoa(i, ht_id_buff, 10);
        strcat(ht_task_name, ht_id_buff); // 似乎没什么吊用,osthreaddef会把第一个变量当作宏字符串传入,作为任务名
        // @todo 还需要一个更优雅的方案来区分不同的电机任务
        osThreadDef(ht_task_name, HTMotorTask, osPriorityNormal, 0, 128);
        ht_task_handle[i] = osThreadCreate(osThread(ht_task_name), ht_motor_instance[i]);
    }
}

void HTMotorStop(HTMotorInstance *motor)
{
    motor->stop_flag = MOTOR_STOP;
}

void HTMotorEnable(HTMotorInstance *motor)
{
    motor->stop_flag = MOTOR_ENALBED;
}

void HTMotorOuterLoop(HTMotorInstance *motor, Closeloop_Type_e type)
{
    motor->motor_settings.outer_loop_type = type;
}